Add a simple-mfd representing IMEM on SDM845 and define the PIL
relocation info region, so that post mortem tools will be able to locate
the loaded remoteprocs.
Reviewed-by: Stephen Boyd <swb...@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.anders...@linaro.org>
---
Changes since v4:
- imem is no longer compatible with "syscon"
arch/arm64/boot/dts/qcom/sdm845.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi
b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 7cce6f1b7c9e..1abbbe7a43a0 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3716,6 +3716,21 @@ spmi_bus: spmi@c440000 {
cell-index = <0>;
};
+ imem@146bf000 {
+ compatible = "simple-mfd";
+ reg = <0 0x146bf000 0 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0x146bf000 0x1000>;
+
+ pil-reloc@94c {
+ compatible = "qcom,pil-reloc-info";
+ reg = <0x94c 0xc8>;
+ };
+ };
+
apps_smmu: iommu@15000000 {
compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
reg = <0 0x15000000 0 0x80000>;
--
2.26.2
