On Fri, May 15, 2020 at 02:45:25PM +0200, Greg Kroah-Hartman wrote:
> On Thu, May 07, 2020 at 02:31:33AM +0300, Serge Semin wrote:
> > Some platforms can be designed in a way so the UART port reference clock
> > might be asynchronously changed at some point. In Baikal-T1 SoC this may
> > happen due to the reference clock being shared between two UART ports, on
> > the Allwinner SoC the reference clock is derived from the CPU clock, so
> > any CPU frequency change should get to be known/reflected by/in the UART
> > controller as well. But it's not enough to just update the
> > uart_port->uartclk field of the corresponding UART port, the 8250
> > controller reference clock divisor should be altered so to preserve
> > current baud rate setting. All of these things is done in a coherent
> > way by calling the serial8250_update_uartclk() method provided in this
> > patch. Though note that it isn't supposed to be called from within the
> > UART port callbacks because the locks using to the protect the UART port
> > data are already taken in there.
> >
> > Signed-off-by: Serge Semin <sergey.se...@baikalelectronics.ru>
> > Cc: Alexey Malahov <alexey.mala...@baikalelectronics.ru>
> > Cc: Thomas Bogendoerfer <tsbog...@alpha.franken.de>
> > Cc: Paul Burton <paulbur...@kernel.org>
> > Cc: Ralf Baechle <r...@linux-mips.org>
> > Cc: Arnd Bergmann <a...@arndb.de>
> > Cc: Long Cheng <long.ch...@mediatek.com>
> > Cc: Andy Shevchenko <andriy.shevche...@linux.intel.com>
> > Cc: Maxime Ripard <mrip...@kernel.org>
> > Cc: Catalin Marinas <catalin.mari...@arm.com>
> > Cc: Will Deacon <w...@kernel.org>
> > Cc: Russell King <li...@armlinux.org.uk>
> > Cc: linux-m...@vger.kernel.org
> > Cc: linux-arm-ker...@lists.infradead.org
> > Cc: linux-media...@lists.infradead.org
> > ---
> > drivers/tty/serial/8250/8250_port.c | 38 +++++++++++++++++++++++++++++
> > include/linux/serial_8250.h | 2 ++
> > 2 files changed, 40 insertions(+)
> >
> > diff --git a/drivers/tty/serial/8250/8250_port.c
> > b/drivers/tty/serial/8250/8250_port.c
> > index 4d83c85a7389..484ff9df1432 100644
> > --- a/drivers/tty/serial/8250/8250_port.c
> > +++ b/drivers/tty/serial/8250/8250_port.c
> > @@ -2628,6 +2628,44 @@ static unsigned int serial8250_get_baud_rate(struct
> > uart_port *port,
> > (port->uartclk + tolerance) / 16);
> > }
> >
> > +/*
> > + * Note in order to avoid the tty port mutex deadlock don't use the next
> > method
> > + * within the uart port callbacks. Primarily it's supposed to be utilized
> > to
> > + * handle a sudden reference clock rate change.
> > + */
> > +void serial8250_update_uartclk(struct uart_port *port, unsigned int
> > uartclk)
> > +{
> > + struct uart_8250_port *up = up_to_u8250p(port);
> > + unsigned int baud, quot, frac = 0;
> > + struct ktermios *termios;
> > + unsigned long flags;
> > +
> > + mutex_lock(&port->state->port.mutex);
> > +
> > + if (port->uartclk == uartclk)
> > + goto out_lock;
> > +
> > + port->uartclk = uartclk;
> > + termios = &port->state->port.tty->termios;
> > +
> > + baud = serial8250_get_baud_rate(port, termios, NULL);
> > + quot = serial8250_get_divisor(port, baud, &frac);
> > +
> > + spin_lock_irqsave(&port->lock, flags);
> > +
> > + uart_update_timeout(port, termios->c_cflag, baud);
> > +
> > + serial8250_set_divisor(port, baud, quot, frac);
> > + serial_port_out(port, UART_LCR, up->lcr);
> > + serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS);
> > +
> > + spin_unlock_irqrestore(&port->lock, flags);
> > +
> > +out_lock:
> > + mutex_unlock(&port->state->port.mutex);
> > +}
> > +EXPORT_SYMBOL(serial8250_update_uartclk);
>
> EXPORT_SYMBOL_GPL() please.
Ok. I guess I've just copied the line from some of the export symbol
statements below. My mistake. Sorry.
-Sergey
>
> thanks,
>
> greg k-h
