Add the GCC lpass clock which is required to access the LPASS core
clocks.
Signed-off-by: Taniya Das <t...@codeaurora.org>
---
drivers/clk/qcom/gcc-sc7180.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
index 6a51b5b..d970647 100644
--- a/drivers/clk/qcom/gcc-sc7180.c
+++ b/drivers/clk/qcom/gcc-sc7180.c
@@ -2230,6 +2230,19 @@ static struct clk_branch gcc_mss_q6_memnoc_axi_clk = {
},
};
+static struct clk_branch gcc_lpass_cfg_noc_sway_clk = {
+ .halt_reg = 0x47018,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x47018,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_lpass_cfg_noc_sway_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct gdsc ufs_phy_gdsc = {
.gdscr = 0x77004,
.pd = {
@@ -2406,6 +2419,7 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
[GCC_MSS_NAV_AXI_CLK] = &gcc_mss_nav_axi_clk.clkr,
[GCC_MSS_Q6_MEMNOC_AXI_CLK] = &gcc_mss_q6_memnoc_axi_clk.clkr,
[GCC_MSS_SNOC_AXI_CLK] = &gcc_mss_snoc_axi_clk.clkr,
+ [GCC_LPASS_CFG_NOC_SWAY_CLK] = &gcc_lpass_cfg_noc_sway_clk.clkr,
};
static const struct qcom_reset_map gcc_sc7180_resets[] = {
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
