Hello, > Hello, > > On Thu, 30 Apr 2020 10:06:13 +0200 > Pali Rohár <p...@kernel.org> wrote: > >> Marek Behún (5): >> PCI: aardvark: Improve link training >> PCI: aardvark: Add PHY support >> dt-bindings: PCI: aardvark: Describe new properties >> arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function >> arm64: dts: marvell: armada-37xx: Move PCIe comphy handle property >> >> Pali Rohár (7): >> PCI: aardvark: Train link immediately after enabling training >> PCI: aardvark: Don't blindly enable ASPM L0s and don't write to >> read-only register >> PCI: of: Zero max-link-speed value is invalid >> PCI: aardvark: Issue PERST via GPIO >> PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access >> PCI: aardvark: Replace custom macros by standard linux/pci_regs.h >> macros >> arm64: dts: marvell: armada-37xx: Move PCIe max-link-speed property > > Thanks a lot for this work. For a number of reasons, I'm less involved > in Marvell platform support in Linux, but I reviewed your series and > followed the discussions around it, and I'm happy to give my: > > Acked-by: Thomas Petazzoni <thomas.petazz...@bootlin.com>
With this acked-by for the series, the reviewed-by from Rob on the binding and the tested-by, I am pretty confident so I applied the patches 10, 11 and 12 on mvebu/dt64. Thanks, Gregory > > for the whole series. The changes all seem sensible, and have been > tested by several folks. > > Thanks! > > Thomas > -- > Thomas Petazzoni, CTO, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com
