From: Kishon Vijay Abraham I <kis...@ti.com>
commit 90d4d3f4ea45370d482fa609dbae4d2281b4074f upstream.
Even though commit cfb5d65f2595 ("ARM: dts: dra7: Add bus_dma_limit
for L3 bus") added bus_dma_limit for L3 bus, the PCIe controller
gets incorrect value of bus_dma_limit.
Fix it by adding empty dma-ranges property to axi@0 and axi@1
(parent device tree node of PCIe controller).
Cc: sta...@kernel.org
Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
Signed-off-by: Tony Lindgren <t...@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
arch/arm/boot/dts/dra7.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -312,6 +312,7 @@
#address-cells = <1>;
ranges = <0x51000000 0x51000000 0x3000
0x0 0x20000000 0x10000000>;
+ dma-ranges;
/**
* To enable PCI endpoint mode, disable the pcie1_rc
* node and enable pcie1_ep mode.
@@ -325,7 +326,6 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0
0x00010000
0x82000000 0 0x20013000 0x13000 0
0xffed000>;
- dma-ranges = <0x02000000 0x0 0x00000000
0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
@@ -368,6 +368,7 @@
#address-cells = <1>;
ranges = <0x51800000 0x51800000 0x3000
0x0 0x30000000 0x10000000>;
+ dma-ranges;
status = "disabled";
pcie2_rc: pcie@51800000 {
reg = <0x51800000 0x2000>, <0x51802000 0x14c>,
<0x1000 0x2000>;
@@ -378,7 +379,6 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0
0x00010000
0x82000000 0 0x30013000 0x13000 0
0xffed000>;
- dma-ranges = <0x02000000 0x0 0x00000000
0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
