Below is the patch for TPM driver.
Comments/suggestions?
--- pristine-linux-2.6.18/drivers/char/tpm/tpm_tis.c 2006-09-19
20:42:06.000000000 -0700
+++ linux-2.6.18-xen/drivers/char/tpm/tpm_tis.c 2007-10-09
15:30:49.000000000 -0700
@@ -56,29 +56,36 @@
enum tis_defaults {
TIS_MEM_BASE = 0xFED40000,
- TIS_MEM_LEN = 0x5000,
+ TIS_MEM_LEN = 0x1000,
TIS_SHORT_TIMEOUT = 750, /* ms */
TIS_LONG_TIMEOUT = 2000, /* 2 sec */
};
-#define TPM_ACCESS(l) (0x0000 | ((l) << 12))
-#define TPM_INT_ENABLE(l) (0x0008 | ((l) << 12))
-#define TPM_INT_VECTOR(l) (0x000C | ((l) << 12))
-#define TPM_INT_STATUS(l) (0x0010 | ((l) << 12))
-#define TPM_INTF_CAPS(l) (0x0014 | ((l) << 12))
-#define TPM_STS(l) (0x0018 | ((l) << 12))
-#define TPM_DATA_FIFO(l) (0x0024 | ((l) << 12))
+#define TPM_ACCESS(l) (0x0000)
+#define TPM_INT_ENABLE(l) (0x0008)
+#define TPM_INT_VECTOR(l) (0x000C)
+#define TPM_INT_STATUS(l) (0x0010)
+#define TPM_INTF_CAPS(l) (0x0014)
+#define TPM_STS(l) (0x0018)
+#define TPM_DATA_FIFO(l) (0x0024)
-#define TPM_DID_VID(l) (0x0F00 | ((l) << 12))
-#define TPM_RID(l) (0x0F04 | ((l) << 12))
+#define TPM_DID_VID(l) (0x0F00)
+#define TPM_RID(l) (0x0F04)
static LIST_HEAD(tis_chips);
static DEFINE_SPINLOCK(tis_lock);
static int check_locality(struct tpm_chip *chip, int l)
{
- if ((ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
- (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
+ unsigned char tpm_access;
+
+ tpm_access = ioread8(chip->vendor.iobase + TPM_ACCESS(l));
+
+ /* check if locality is closed */
+ if(tpm_access == 0xFF)
+ return -1;
+
+ if((tpm_access & (TPM_ACCESS_ACTIVE_LOCALITY |
TPM_ACCESS_VALID)) ==
(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
return chip->vendor.locality = l;
@@ -251,10 +258,14 @@
out:
tpm_tis_ready(chip);
- release_locality(chip, chip->vendor.locality, 0);
+ release_locality(chip, chip->vendor.locality, 1);
return size;
}
+static int locality = 0;
+module_param(locality, int, 0444);
+MODULE_PARM_DESC(locality, "TPM Locality To access");
+
/*
* If interrupts are used (signaled by an irq set in the vendor
structure)
* tpm.c can skip polling for the data to be available as the interrupt
is
@@ -266,7 +277,7 @@
size_t count = 0;
u32 ordinal;
- if (request_locality(chip, 0) < 0)
+ if (request_locality(chip, locality) < 0)
return -EBUSY;
status = tpm_tis_status(chip);
@@ -326,7 +337,7 @@
return len;
out_err:
tpm_tis_ready(chip);
- release_locality(chip, chip->vendor.locality, 0);
+ release_locality(chip, chip->vendor.locality, 1);
return rc;
}
@@ -401,7 +412,10 @@
{
struct tpm_chip *chip = (struct tpm_chip *) dev_id;
u32 interrupt;
- int i;
+
+ /* check if interrupt is meant for this locality */
+ if(check_locality(chip, locality) < 0)
+ return IRQ_NONE;
interrupt = ioread32(chip->vendor.iobase +
TPM_INT_STATUS(chip->vendor.locality));
@@ -411,10 +425,6 @@
if (interrupt & TPM_INTF_DATA_AVAIL_INT)
wake_up_interruptible(&chip->vendor.read_queue);
- if (interrupt & TPM_INTF_LOCALITY_CHANGE_INT)
- for (i = 0; i < 5; i++)
- if (check_locality(chip, i) >= 0)
- break;
if (interrupt &
(TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_STS_VALID_INT |
TPM_INTF_CMD_READY_INT))
@@ -440,7 +450,7 @@
struct tpm_chip *chip;
if (!start)
- start = TIS_MEM_BASE;
+ start = TIS_MEM_BASE | (locality << 12);
if (!len)
len = TIS_MEM_LEN;
@@ -490,8 +500,9 @@
if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
dev_dbg(dev, "\tData Avail Int Support\n");
- if (request_locality(chip, 0) != 0) {
- rc = -ENODEV;
+ if (request_locality(chip, locality) < 0) {
+ rc = -EBUSY;
+ printk("failed request_locality\n");
goto out_err;
}
@@ -582,9 +593,11 @@
tpm_get_timeouts(chip);
tpm_continue_selftest(chip);
+ release_locality(chip, chip->vendor.locality, 1);
return 0;
out_err:
+ release_locality(chip, chip->vendor.locality, 1);
if (chip->vendor.iobase)
iounmap(chip->vendor.iobase);
tpm_remove_hardware(chip->dev);
@@ -636,7 +649,7 @@
MODULE_PARM_DESC(hid, "Set additional specific HID for this driver to
probe");
static struct device_driver tis_drv = {
- .name = "tpm_tis",
+ .name = "",
.bus = &platform_bus_type,
.owner = THIS_MODULE,
.suspend = tpm_pm_suspend,
@@ -648,19 +661,34 @@
static int force;
module_param(force, bool, 0444);
MODULE_PARM_DESC(force, "Force device probe rather than using ACPI
entry");
+
+static char *devname = NULL;
+
static int __init init_tis(void)
{
+#define DEVNAME_SIZE 10
+
int rc;
+ if ((locality < 0) || (locality > 4)) {
+ return PTR_ERR(pdev);
+ }
+
if (force) {
+ devname = kmalloc(DEVNAME_SIZE, GFP_KERNEL);
+ scnprintf(devname, DEVNAME_SIZE, "%s%d", "tpm_tis",
locality);
+
+ tis_drv.name = devname;
rc = driver_register(&tis_drv);
if (rc < 0)
return rc;
- if
(IS_ERR(pdev=platform_device_register_simple("tpm_tis", -1, NULL, 0)))
+
+ if (IS_ERR(pdev=platform_device_register_simple(devname,
-1, NULL, 0)))
return PTR_ERR(pdev);
if((rc=tpm_tis_init(&pdev->dev, 0, 0)) != 0) {
platform_device_unregister(pdev);
driver_unregister(&tis_drv);
+ kfree(devname);
}
return rc;
}
@@ -692,7 +720,9 @@
if (force) {
platform_device_unregister(pdev);
driver_unregister(&tis_drv);
- } else
+ kfree(devname);
+ }
+ else
pnp_unregister_driver(&tis_pnp_driver);
}
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Wednesday, October 10, 2007 12:46 PM
To: Agarwal, Lomesh
Cc: linux-kernel@vger.kernel.org
Subject: Re: TPM driver changes to support multiple locality
On Tue, 09 Oct 2007 15:51:11 PDT, "Agarwal, Lomesh" said:
> Current TPM driver supports only locality 0. I am planning to add
> support so that it can access any locality. Locality parameter will be
> passed as parameter. Will this change be acceptable? If yes then I
will
> modify the driver and send the patch.
Make sure you extend the API in such a way that older userspace programs
that don't pass the new locality parameter still work correctly.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
