i.MX6/7 SoCs' temperature sensor is inside anatop module from HW
perspective, so it should be a child node of anatop.

Signed-off-by: Anson Huang <[email protected]>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 22 +++++++++++-----------
 arch/arm/boot/dts/imx6sl.dtsi  | 20 ++++++++++----------
 arch/arm/boot/dts/imx6sll.dtsi | 20 ++++++++++----------
 arch/arm/boot/dts/imx6sx.dtsi  | 20 ++++++++++----------
 arch/arm/boot/dts/imx6ul.dtsi  | 20 ++++++++++----------
 arch/arm/boot/dts/imx7s.dtsi   | 20 ++++++++++----------
 6 files changed, 61 insertions(+), 61 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 39d4afd..43d44d5 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -69,17 +69,6 @@
                };
        };
 
-       tempmon: tempmon {
-               compatible = "fsl,imx6q-tempmon";
-               interrupt-parent = <&gpc>;
-               interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
-               fsl,tempmon = <&anatop>;
-               nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-               nvmem-cell-names = "calib", "temp_grade";
-               clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-               #thermal-sensor-cells = <0>;
-       };
-
        ldb: ldb {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -795,6 +784,17 @@
                                        anatop-min-voltage = <725000>;
                                        anatop-max-voltage = <1450000>;
                                };
+
+                               tempmon: tempmon {
+                                       compatible = "fsl,imx6q-tempmon";
+                                       interrupt-parent = <&gpc>;
+                                       interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+                                       fsl,tempmon = <&anatop>;
+                                       nvmem-cells = <&tempmon_calib>, 
<&tempmon_temp_grade>;
+                                       nvmem-cell-names = "calib", 
"temp_grade";
+                                       clocks = <&clks 
IMX6QDL_CLK_PLL3_USB_OTG>;
+                                       #thermal-sensor-cells = <0>;
+                               };
                        };
 
                        usbphy1: usbphy@20c9000 {
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 911d8cf..d8efc0a 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -93,16 +93,6 @@
                };
        };
 
-       tempmon: tempmon {
-               compatible = "fsl,imx6q-tempmon";
-               interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
-               interrupt-parent = <&gpc>;
-               fsl,tempmon = <&anatop>;
-               nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-               nvmem-cell-names = "calib", "temp_grade";
-               clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
-       };
-
        pmu {
                compatible = "arm,cortex-a9-pmu";
                interrupt-parent = <&gpc>;
@@ -628,6 +618,16 @@
                                        anatop-min-voltage = <725000>;
                                        anatop-max-voltage = <1450000>;
                                };
+
+                               tempmon: tempmon {
+                                       compatible = "fsl,imx6q-tempmon";
+                                       interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+                                       interrupt-parent = <&gpc>;
+                                       fsl,tempmon = <&anatop>;
+                                       nvmem-cells = <&tempmon_calib>, 
<&tempmon_temp_grade>;
+                                       nvmem-cell-names = "calib", 
"temp_grade";
+                                       clocks = <&clks 
IMX6SL_CLK_PLL3_USB_OTG>;
+                               };
                        };
 
                        usbphy1: usbphy@20c9000 {
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index edd3abb..bf7f048 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -105,16 +105,6 @@
                clock-output-names = "ipp_di1";
        };
 
-       tempmon: temperature-sensor {
-               compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
-               interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-               interrupt-parent = <&gpc>;
-               fsl,tempmon = <&anatop>;
-               nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-               nvmem-cell-names = "calib", "temp_grade";
-               clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
-       };
-
        soc {
                #address-cells = <1>;
                #size-cells = <1>;
@@ -531,6 +521,16 @@
                                        anatop-max-voltage = <3400000>;
                                        anatop-enable-bit = <0>;
                                };
+
+                               tempmon: temperature-sensor {
+                                       compatible = "fsl,imx6sll-tempmon", 
"fsl,imx6sx-tempmon";
+                                       interrupts = <GIC_SPI 49 
IRQ_TYPE_LEVEL_HIGH>;
+                                       interrupt-parent = <&gpc>;
+                                       fsl,tempmon = <&anatop>;
+                                       nvmem-cells = <&tempmon_calib>, 
<&tempmon_temp_grade>;
+                                       nvmem-cell-names = "calib", 
"temp_grade";
+                                       clocks = <&clks 
IMX6SLL_CLK_PLL3_USB_OTG>;
+                               };
                        };
 
                        usbphy1: usb-phy@20c9000 {
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index e031337..8c4473b 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -134,16 +134,6 @@
                clock-output-names = "anaclk2";
        };
 
-       tempmon: tempmon {
-               compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
-               interrupt-parent = <&gpc>;
-               interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-               fsl,tempmon = <&anatop>;
-               nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-               nvmem-cell-names = "calib", "temp_grade";
-               clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
-       };
-
        pmu {
                compatible = "arm,cortex-a9-pmu";
                interrupt-parent = <&gpc>;
@@ -696,6 +686,16 @@
                                        anatop-min-voltage = <725000>;
                                        anatop-max-voltage = <1450000>;
                                };
+
+                               tempmon: tempmon {
+                                       compatible = "fsl,imx6sx-tempmon", 
"fsl,imx6q-tempmon";
+                                       interrupt-parent = <&gpc>;
+                                       interrupts = <GIC_SPI 49 
IRQ_TYPE_LEVEL_HIGH>;
+                                       fsl,tempmon = <&anatop>;
+                                       nvmem-cells = <&tempmon_calib>, 
<&tempmon_temp_grade>;
+                                       nvmem-cell-names = "calib", 
"temp_grade";
+                                       clocks = <&clks 
IMX6SX_CLK_PLL3_USB_OTG>;
+                               };
                        };
 
                        usbphy1: usbphy@20c9000 {
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 35e7301..505fd4f 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -131,16 +131,6 @@
                clock-output-names = "ipp_di1";
        };
 
-       tempmon: tempmon {
-               compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
-               interrupt-parent = <&gpc>;
-               interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-               fsl,tempmon = <&anatop>;
-               nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-               nvmem-cell-names = "calib", "temp_grade";
-               clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
-       };
-
        pmu {
                compatible = "arm,cortex-a7-pmu";
                interrupt-parent = <&gpc>;
@@ -611,6 +601,16 @@
                                        anatop-min-voltage = <725000>;
                                        anatop-max-voltage = <1450000>;
                                };
+
+                               tempmon: tempmon {
+                                       compatible = "fsl,imx6ul-tempmon", 
"fsl,imx6sx-tempmon";
+                                       interrupt-parent = <&gpc>;
+                                       interrupts = <GIC_SPI 49 
IRQ_TYPE_LEVEL_HIGH>;
+                                       fsl,tempmon = <&anatop>;
+                                       nvmem-cells = <&tempmon_calib>, 
<&tempmon_temp_grade>;
+                                       nvmem-cell-names = "calib", 
"temp_grade";
+                                       clocks = <&clks 
IMX6UL_CLK_PLL3_USB_OTG>;
+                               };
                        };
 
                        usbphy1: usbphy@20c9000 {
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 8bac491..3904558 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -147,16 +147,6 @@
                };
        };
 
-       tempmon: tempmon {
-               compatible = "fsl,imx7d-tempmon";
-               interrupt-parent = <&gpc>;
-               interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-               fsl,tempmon = <&anatop>;
-               nvmem-cells = <&tempmon_calib>, <&fuse_grade>;
-               nvmem-cell-names = "calib", "temp_grade";
-               clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
-       };
-
        timer {
                compatible = "arm,armv7-timer";
                interrupt-parent = <&intc>;
@@ -586,6 +576,16 @@
                                        anatop-max-voltage = <1300000>;
                                        anatop-enable-bit = <0>;
                                };
+
+                               tempmon: tempmon {
+                                       compatible = "fsl,imx7d-tempmon";
+                                       interrupt-parent = <&gpc>;
+                                       interrupts = <GIC_SPI 49 
IRQ_TYPE_LEVEL_HIGH>;
+                                       fsl,tempmon = <&anatop>;
+                                       nvmem-cells = <&tempmon_calib>, 
<&fuse_grade>;
+                                       nvmem-cell-names = "calib", 
"temp_grade";
+                                       clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+                               };
                        };
 
                        snvs: snvs@30370000 {
-- 
2.7.4

Reply via email to