On 10/12/07, Andrew Morton <[EMAIL PROTECTED]> wrote: > On Fri, 12 Oct 2007 14:03:28 +0900 KAMEZAWA Hiroyuki <[EMAIL PROTECTED]> > wrote: > > > On Thu, 11 Oct 2007 21:31:26 -0700 > > Andrew Morton <[EMAIL PROTECTED]> wrote: > > > > > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/ > > > > > > - I've been largely avoiding applying anything since rc8-mm2 in an attempt > > > to stabilise things for the 2.6.23 merge. > > > > > On RHEL5/x86_64 environment, > > > > == > > [EMAIL PROTECTED] ref-2.6.23-mm1]$ make menuconfig > > Makefile:456: /home/kamezawa/ref-2.6.23-mm1/arch//Makefile: No such file or > > directory > > make: *** No rule to make target > > `/home/kamezawa/ref-2.6.23-mm1/arch//Makefile'. Stop. > > == > > > > $(ARCH) cannot be detected automatically... > > So you need to set $ARCH by hand? I always do that so I didn't notice this.
After setting ARCH by hand, it build and booted OK for me. But I did add the patch fromhttp://lkml.org/lkml/2007/10/11/48 as my personal hotfix. Two things I noted in my logs: [ 16.040000] NET: Registered protocol family 1 [ 16.050000] NET: Registered protocol family 17 [ 16.060000] NET: Registered protocol family 15 [ 16.080000] sysctl table check failed: /sunrpc/transports .7249.14 Missing strategy [ 16.100000] sysctl table check failed: /sunrpc/transports .7249.14 Unknown sysctl binary path [ 16.130000] RPC: Registered udp transport module. [ 16.140000] RPC: Registered tcp transport module. ... but NFSv4 still works. Oct 12 10:23:03 treogen smartd[6091]: Device: /dev/sdc, not found in smartd database. Oct 12 10:23:03 treogen [ 105.990000] WARNING: at drivers/ata/libata-core.c:5752 ata_qc_issue() Oct 12 10:23:03 treogen [ 105.990000] Oct 12 10:23:03 treogen [ 105.990000] Call Trace: Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804442ef>] ata_qc_issue+0x47f/0x540 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff80432e60>] scsi_done+0x0/0x20 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff80449c80>] ata_scsi_flush_xlat+0x0/0x30 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8044a6ea>] ata_scsi_translate+0xfa/0x180 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff80432e60>] scsi_done+0x0/0x20 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8044d84d>] ata_scsi_queuecmd+0x12d/0x210 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804333d0>] scsi_dispatch_cmd+0x150/0x250 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804391f1>] scsi_request_fn+0x1f1/0x360 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8039b827>] elv_insert+0x167/0x250 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff803a0ac2>] __make_request+0xe2/0x670 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8039d560>] generic_make_request+0x1d0/0x3c0 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff802bc1b9>] bio_alloc_bioset+0xb9/0x140 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff802bc061>] __bio_clone+0x91/0xc0 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8039d7b6>] submit_bio+0x66/0xf0 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804cc06e>] write_page+0x16e/0x2c0 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff80231b01>] dequeue_task_fair+0x51/0xb0 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804c482d>] md_update_sb+0x18d/0x320 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804caa10>] md_thread+0x0/0x100 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804c9065>] md_check_recovery+0x1f5/0x550 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804caa10>] md_thread+0x0/0x100 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804bf1d3>] raid5d+0x23/0x490 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8023eb12>] try_to_del_timer_sync+0x52/0x60 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff805b0057>] schedule_timeout+0x67/0xd0 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8023e740>] process_timeout+0x0/0x10 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff805b004a>] schedule_timeout+0x5a/0xd0 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804caa10>] md_thread+0x0/0x100 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804caa40>] md_thread+0x30/0x100 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8024a710>] autoremove_wake_function+0x0/0x30 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804caa10>] md_thread+0x0/0x100 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8024a32b>] kthread+0x4b/0x80 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8020c9d8>] child_rip+0xa/0x12 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8024a2e0>] kthread+0x0/0x80 Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8020c9ce>] child_rip+0x0/0x12 Oct 12 10:23:03 treogen [ 105.990000] Oct 12 10:23:13 treogen [ 115.940000] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Oct 12 10:23:13 treogen [ 115.940000] ata3.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 Oct 12 10:23:13 treogen [ 115.940000] res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Oct 12 10:23:13 treogen [ 115.940000] ata3.00: status: { DRDY } Oct 12 10:23:14 treogen [ 116.270000] ata3: soft resetting link Oct 12 10:23:14 treogen [ 116.430000] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 12 10:23:14 treogen [ 116.740000] ata3.00: configured for UDMA/133 Oct 12 10:23:14 treogen [ 116.740000] ata3: EH complete Oct 12 10:23:14 treogen [ 116.740000] WARNING: at drivers/ata/libata-core.c:5752 ata_qc_issue() Oct 12 10:23:14 treogen [ 116.740000] Oct 12 10:23:14 treogen [ 116.740000] Call Trace: Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff804442ef>] ata_qc_issue+0x47f/0x540 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80432e60>] scsi_done+0x0/0x20 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80449c80>] ata_scsi_flush_xlat+0x0/0x30 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8044a6ea>] ata_scsi_translate+0xfa/0x180 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80432e60>] scsi_done+0x0/0x20 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8044d84d>] ata_scsi_queuecmd+0x12d/0x210 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff804333d0>] scsi_dispatch_cmd+0x150/0x250 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff804391f1>] scsi_request_fn+0x1f1/0x360 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80436b80>] scsi_error_handler+0x0/0x310 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8039fe73>] blk_run_queue+0x43/0x80 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80438659>] scsi_run_host_queues+0x19/0x40 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80436d54>] scsi_error_handler+0x1d4/0x310 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80436b80>] scsi_error_handler+0x0/0x310 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8024a32b>] kthread+0x4b/0x80 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8020c9d8>] child_rip+0xa/0x12 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8024a2e0>] kthread+0x0/0x80 Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8020c9ce>] child_rip+0x0/0x12 Oct 12 10:23:14 treogen [ 116.740000] Oct 12 10:23:14 treogen [ 116.770000] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) Oct 12 10:23:14 treogen [ 116.770000] sd 2:0:0:0: [sdc] Write Protect is off Oct 12 10:23:14 treogen [ 116.770000] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Oct 12 10:23:14 treogen [ 116.770000] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 12 10:23:24 treogen [ 126.740000] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Oct 12 10:23:24 treogen [ 126.740000] ata3.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 Oct 12 10:23:24 treogen [ 126.740000] res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Oct 12 10:23:24 treogen [ 126.740000] ata3.00: status: { DRDY } Oct 12 10:23:24 treogen [ 127.070000] ata3: soft resetting link Oct 12 10:23:25 treogen [ 127.230000] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 12 10:23:25 treogen [ 127.370000] ata3.00: configured for UDMA/133 Oct 12 10:23:25 treogen [ 127.370000] ata3: EH complete Oct 12 10:23:25 treogen [ 127.370000] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) Oct 12 10:23:25 treogen [ 127.370000] sd 2:0:0:0: [sdc] Write Protect is off Oct 12 10:23:25 treogen [ 127.370000] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Oct 12 10:23:25 treogen [ 127.370000] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 12 10:23:25 treogen smartd[6091]: Device: /dev/sdc, is SMART capable. Adding to "monitor" list. ... but I can still access the filesystem and the RAID device on that drive. (sdc is MAXTOR STM332082 3.AA sata-drive on a MCP55 using sata_nv with swncq activated) Torsten - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/