Hi Sai,

On Tue, May 19, 2020 at 07:06:02PM +0530, Sai Prakash Ranjan wrote:
> On some QCOM SoCs, replicators in Always-On domain loses its
> context as soon as the clock is disabled. Currently as a part
> of pm_runtime workqueue, clock is disabled after the replicator
> is initialized by amba_pm_runtime_suspend assuming that context
> is not lost which is not true for replicators with such
> limitations. So add a new property "qcom,replicator-loses-context"
> to identify such replicators and reset them.
> 
> Suggested-by: Mike Leach <[email protected]>
> Signed-off-by: Sai Prakash Ranjan <[email protected]>
> ---
> 
> Added Mike's suggested by for parts other than the DT property.
> Perhaps I should add Co-developed-by Mike since the full skeletal
> was given by Mike. I can add that if required on the next version.

 I will let Mike decide what he wants to do - I'm fine either way.

> 
> ---
>  .../coresight/coresight-replicator.c          | 53 +++++++++++++------
>  1 file changed, 36 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/hwtracing/coresight/coresight-replicator.c 
> b/drivers/hwtracing/coresight/coresight-replicator.c
> index c619b456f55a..ba66160c8140 100644
> --- a/drivers/hwtracing/coresight/coresight-replicator.c
> +++ b/drivers/hwtracing/coresight/coresight-replicator.c
> @@ -38,6 +38,7 @@ struct replicator_drvdata {
>       struct clk              *atclk;
>       struct coresight_device *csdev;
>       spinlock_t              spinlock;
> +     bool                    check_idfilter_val;

Please add documentation for the new field, the same way other fields are
documented.

>  };
>  
>  static void dynamic_replicator_reset(struct replicator_drvdata *drvdata)
> @@ -66,29 +67,43 @@ static int dynamic_replicator_enable(struct 
> replicator_drvdata *drvdata,
>                                    int inport, int outport)
>  {
>       int rc = 0;
> -     u32 reg;
> -
> -     switch (outport) {
> -     case 0:
> -             reg = REPLICATOR_IDFILTER0;
> -             break;
> -     case 1:
> -             reg = REPLICATOR_IDFILTER1;
> -             break;
> -     default:
> -             WARN_ON(1);
> -             return -EINVAL;
> -     }
> +     u32 id0val, id1val;
>  
>       CS_UNLOCK(drvdata->base);
>  
> -     if ((readl_relaxed(drvdata->base + REPLICATOR_IDFILTER0) == 0xff) &&
> -         (readl_relaxed(drvdata->base + REPLICATOR_IDFILTER1) == 0xff))
> +     id0val = readl_relaxed(drvdata->base + REPLICATOR_IDFILTER0);
> +     id1val = readl_relaxed(drvdata->base + REPLICATOR_IDFILTER1);
> +
> +     /*
> +      * Some replicator designs lose context when AMBA clocks are removed,
> +      * so have a check for this.
> +      */
> +     if (drvdata->check_idfilter_val && id0val == 0x0 && id1val == 0x0)
> +             id0val = id1val = 0xff;
> +
> +     if (id0val == 0xff && id1val == 0xff)
>               rc = coresight_claim_device_unlocked(drvdata->base);
>  
> +     if (!rc) {
> +             switch (outport) {
> +             case 0:
> +                     id0val = 0x0;
> +                     break;
> +             case 1:
> +                     id1val = 0x0;
> +                     break;
> +             default:
> +                     WARN_ON(1);
> +                     rc = -EINVAL;
> +             }
> +     }
> +
>       /* Ensure that the outport is enabled. */
> -     if (!rc)
> -             writel_relaxed(0x00, drvdata->base + reg);
> +     if (!rc) {
> +             writel_relaxed(id0val, drvdata->base + REPLICATOR_IDFILTER0);
> +             writel_relaxed(id1val, drvdata->base + REPLICATOR_IDFILTER1);
> +     }
> +
>       CS_LOCK(drvdata->base);
>  
>       return rc;
> @@ -239,6 +254,10 @@ static int replicator_probe(struct device *dev, struct 
> resource *res)
>               desc.groups = replicator_groups;
>       }
>  
> +     if (fwnode_property_present(dev_fwnode(dev),
> +                                 "qcom,replicator-loses-context"))
> +             drvdata->check_idfilter_val = true;
> +

The header <linux/property.h> needs to be added for function
fwnode_property_present().

What is the clock situation with other QC components like funnels?  Have they
also been designed the same way?  If so the binding should probably be
"qcom,component-loses-context", otherwise what you have suggested will work just
fine.  My goal here is to avoid having "qcom,replicator-loses-context" and
"qcom,funnel-loses-context".  

Lastly, I have applied patch 1 and 2 of this set to my tree so no need to resend
them again with the next revision.

Thanks,
Mathieu

>       dev_set_drvdata(dev, drvdata);
>  
>       pdata = coresight_get_platform_data(dev);
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 

Reply via email to