Hi I enabled netconsole but I am affraid that it won't help. In attachment I am sending complete log over netconsole. While I was trying to make everything, I got a lockup on linux-2.6.23-rc8, but I am not sure into this. But all lockups happend in VGA console mode. Any ideas.
Rok Ingo Molnar wrote: >> I tried to recompile with those options enabled, kernel and linux >> boots and loads fine, but after few minutes (if i try to recompile >> kernel in console) the system locks completely (hard reset) without >> any messages. Is there anything I can do, maybe console on serial >> port? My new config is atached. > > yes, serial console (or netconsole) output would be useful, if you can > solve that. Another way would be to boot with nmi_watchdog=2, do the > kernel recompile in a VGA text console, and wait for the lockup to > occur. Either you get some crash message to the text console > immediately, or you should get the NMI watchdog print something within a > minute or so. If neither happens you just get a blank hard lockup then > the wedge is very deep ... > > (also make sure that the NMI counter in /proc/interrupts is increasing > on all CPUs properly, with nmi_watchdog=2. If not all CPUs/cores are > increasing their NMI counters once per second then the NMI watchdog wont > be able to print out a stackdump.) > > Ingo - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/