On Wed, May 27, 2020 at 04:58:01PM +0300, Andy Shevchenko wrote:
> On Wed, May 27, 2020 at 03:01:10PM +0300, Serge Semin wrote:
> > This is a preparation patch before adding a quirk with custom registers
> > map creation required for the Baikal-T1 System I2C support.
>
> Looks good. Though one nit below.
> Reviewed-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
>
> > Signed-off-by: Serge Semin <sergey.se...@baikalelectronics.ru>
> > Cc: Alexey Malahov <alexey.mala...@baikalelectronics.ru>
> > Cc: Thomas Bogendoerfer <tsbog...@alpha.franken.de>
> > Cc: Rob Herring <robh...@kernel.org>
> > Cc: linux-m...@vger.kernel.org
> > Cc: devicet...@vger.kernel.org
> >
> > ---
> >
> > Changelog v3:
> > - This is a new patch, which has been created due to declining the
> > glue-layer approach.
> >
> > Changelog v4:
> > - Use PTR_ERR_OR_ZERO() helper in the bt1_i2c_request_regs() method.
> > - Discard devm_platform_get_and_ioremap_resource() utilization.
> > ---
> > drivers/i2c/busses/i2c-designware-platdrv.c | 18 +++++++++++++-----
> > 1 file changed, 13 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c
> > b/drivers/i2c/busses/i2c-designware-platdrv.c
> > index ad292de2d260..061c8d506c7c 100644
> > --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> > +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> > @@ -108,6 +108,15 @@ static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev
> > *dev)
> > pm_runtime_put_noidle(dev->dev);
> > }
> >
> > +static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev)
> > +{
> > + struct platform_device *pdev = to_platform_device(dev->dev);
> > +
> > + dev->base = devm_platform_ioremap_resource(pdev, 0);
> > +
> > + return PTR_ERR_OR_ZERO(dev->base);
> > +}
> > +
> > static int dw_i2c_plat_probe(struct platform_device *pdev)
> > {
> > struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
> > @@ -125,15 +134,14 @@ static int dw_i2c_plat_probe(struct platform_device
> > *pdev)
> > return -ENOMEM;
> >
>
> > dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev);
>
> It's related to previous patch, but I just realized that '|' is not needed
> here. Care to amend in the previous patch?
Agreed. Thanks.
-Sergey
>
> > -
> > - dev->base = devm_platform_ioremap_resource(pdev, 0);
> > - if (IS_ERR(dev->base))
> > - return PTR_ERR(dev->base);
> > -
> > dev->dev = &pdev->dev;
> > dev->irq = irq;
> > platform_set_drvdata(pdev, dev);
> >
> > + ret = dw_i2c_plat_request_regs(dev);
> > + if (ret)
> > + return ret;
> > +
> > dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
> > if (IS_ERR(dev->rst))
> > return PTR_ERR(dev->rst);
> > --
> > 2.26.2
> >
>
> --
> With Best Regards,
> Andy Shevchenko
>
>
