[PATCH 1/2] ARM: dts: stm32: fix uart nodes ordering in stm32mp15-pinctrl

[Erwan Le Ray]

Fix usart and uart nodes ordering. Several usart nodes didn't respect
expecting ordering.

Fixes: 077e0638fc83 ("ARM: dts: stm32: Add alternate pinmux for USART2 pins on 
stm32mp15")

Signed-off-by: Erwan Le Ray <erwan.le...@st.com>

diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi 
b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 7cf535dc05f5..5ff1323236e1 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1574,67 +1574,6 @@
                };
        };
 
-       usart2_pins_a: usart2-0 {
-               pins1 {
-                       pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
-                                <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
-                       bias-disable;
-                       drive-push-pull;
-                       slew-rate = <0>;
-               };
-               pins2 {
-                       pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
-                                <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS 
*/
-                       bias-disable;
-               };
-       };
-
-       usart2_sleep_pins_a: usart2-sleep-0 {
-               pins {
-                       pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
-                                <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS 
*/
-                                <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
-                                <STM32_PINMUX('D', 3, ANALOG)>; /* 
USART2_CTS_NSS */
-               };
-       };
-
-       usart2_pins_b: usart2-1 {
-               pins1 {
-                       pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
-                                <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
-                       bias-disable;
-                       drive-push-pull;
-                       slew-rate = <0>;
-               };
-               pins2 {
-                       pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */
-                                <STM32_PINMUX('E', 15, AF7)>; /* 
USART2_CTS_NSS */
-                       bias-disable;
-               };
-       };
-
-       usart2_sleep_pins_b: usart2-sleep-1 {
-               pins {
-                       pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
-                                <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS 
*/
-                                <STM32_PINMUX('F', 4, ANALOG)>, /* USART2_RX */
-                                <STM32_PINMUX('E', 15, ANALOG)>; /* 
USART2_CTS_NSS */
-               };
-       };
-
-       usart3_pins_a: usart3-0 {
-               pins1 {
-                       pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
-                       bias-disable;
-                       drive-push-pull;
-                       slew-rate = <0>;
-               };
-               pins2 {
-                       pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
-                       bias-disable;
-               };
-       };
-
        uart4_pins_a: uart4-0 {
                pins1 {
                        pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
@@ -1732,6 +1671,67 @@
                };
        };
 
+       usart2_pins_a: usart2-0 {
+               pins1 {
+                       pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+                                <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+                       bias-disable;
+                       drive-push-pull;
+                       slew-rate = <0>;
+               };
+               pins2 {
+                       pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+                                <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS 
*/
+                       bias-disable;
+               };
+       };
+
+       usart2_sleep_pins_a: usart2-sleep-0 {
+               pins {
+                       pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
+                                <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS 
*/
+                                <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
+                                <STM32_PINMUX('D', 3, ANALOG)>; /* 
USART2_CTS_NSS */
+               };
+       };
+
+       usart2_pins_b: usart2-1 {
+               pins1 {
+                       pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+                                <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
+                       bias-disable;
+                       drive-push-pull;
+                       slew-rate = <0>;
+               };
+               pins2 {
+                       pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */
+                                <STM32_PINMUX('E', 15, AF7)>; /* 
USART2_CTS_NSS */
+                       bias-disable;
+               };
+       };
+
+       usart2_sleep_pins_b: usart2-sleep-1 {
+               pins {
+                       pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
+                                <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS 
*/
+                                <STM32_PINMUX('F', 4, ANALOG)>, /* USART2_RX */
+                                <STM32_PINMUX('E', 15, ANALOG)>; /* 
USART2_CTS_NSS */
+               };
+       };
+
+       usart3_pins_a: usart3-0 {
+               pins1 {
+                       pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
+                       bias-disable;
+                       drive-push-pull;
+                       slew-rate = <0>;
+               };
+               pins2 {
+                       pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+                       bias-disable;
+               };
+       };
+
        usbotg_hs_pins_a: usbotg-hs-0 {
                pins {
                        pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
-- 
2.17.1