05 - use superio-locks in rest of drivers/hwmon/*.c
this patch is compile-tested only, please review for sanity before you
try running them. Things to look for - missing superio_release(),
opportunities to use superio_devid(), superio_inw(), etc.
Signed-off-by: Jim Cromie <[EMAIL PROTECTED]>
---
hwmon-superio-others
Kconfig | 6 +++
f71805f.c | 86 +++++++++++++++-------------------------------
it87.c | 80 +++++++++++++++---------------------------
smsc47b397.c | 63 ++++++++++++---------------------
smsc47m1.c | 69 +++++++++++++------------------------
vt1211.c | 70 +++++++++++++------------------------
w83627ehf.c | 110 +++++++++++++++++++++++++----------------------------------
7 files changed, 188 insertions(+), 296 deletions(-)
diff -ruNp -X dontdiff -X exclude-diffs
hwmon-fan-push-offset/drivers/hwmon/f71805f.c
hwmon-superio.old/drivers/hwmon/f71805f.c
--- hwmon-fan-push-offset/drivers/hwmon/f71805f.c 2007-10-14
13:00:24.000000000 -0600
+++ hwmon-superio.old/drivers/hwmon/f71805f.c 2007-10-14 17:22:23.000000000
-0600
@@ -39,6 +39,7 @@
#include <linux/mutex.h>
#include <linux/sysfs.h>
#include <linux/ioport.h>
+#include <linux/superio-locks.h>
#include <asm/io.h>
static struct platform_device *pdev;
@@ -52,8 +53,6 @@ enum kinds { f71805f, f71872f };
#define F71805F_LD_HWM 0x04
-#define SIO_REG_LDSEL 0x07 /* Logical device select */
-#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
#define SIO_REG_DEVREV 0x22 /* Device revision */
#define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */
#define SIO_REG_FNSEL1 0x29 /* Multi Function Select 1 (F71872F) */
@@ -64,43 +63,15 @@ enum kinds { f71805f, f71872f };
#define SIO_F71805F_ID 0x0406
#define SIO_F71872F_ID 0x0341
-static inline int
-superio_inb(int base, int reg)
-{
- outb(reg, base);
- return inb(base + 1);
-}
-
-static int
-superio_inw(int base, int reg)
-{
- int val;
- outb(reg++, base);
- val = inb(base + 1) << 8;
- outb(reg, base);
- val |= inb(base + 1);
- return val;
-}
+static struct superio* gate;
-static inline void
-superio_select(int base, int ld)
-{
- outb(SIO_REG_LDSEL, base);
- outb(ld, base + 1);
-}
-
-static inline void
-superio_enter(int base)
-{
- outb(0x87, base);
- outb(0x87, base);
-}
-
-static inline void
-superio_exit(int base)
-{
- outb(0xaa, base);
-}
+static __devinit struct superio_search where = {
+ .cmdreg_addrs = { 0x2e, 0x4e },
+ .device_ids = { SIO_F71805F_ID, SIO_F71872F_ID, 0 },
+ .devid_word = 1,
+ .enter_seq = { 0x87, 0x87 },
+ .exit_seq = { 0xAA }
+};
/*
* ISA constants
@@ -1480,31 +1451,33 @@ exit:
return err;
}
-static int __init f71805f_find(int sioaddr, unsigned short *address,
- struct f71805f_sio_data *sio_data)
+static int __init f71805f_find(struct f71805f_sio_data *sio_data)
{
int err = -ENODEV;
- u16 devid;
+ u16 devid, address;
static const char *names[] = {
"F71805F/FG",
"F71872F/FG or F71806F/FG",
};
-
- superio_enter(sioaddr);
-
- devid = superio_inw(sioaddr, SIO_REG_MANID);
+ gate = superio_find(&where);
+ if (!gate) {
+ printk(KERN_WARNING "pc87360: superio port not detected, "
+ "module not intalled.\n");
+ return -ENODEV;
+ }
+ superio_enter(gate);
+ devid = superio_inw(gate, SIO_REG_MANID);
if (devid != SIO_FINTEK_ID)
goto exit;
- devid = superio_inw(sioaddr, SIO_REG_DEVID);
switch (devid) {
case SIO_F71805F_ID:
sio_data->kind = f71805f;
break;
case SIO_F71872F_ID:
sio_data->kind = f71872f;
- sio_data->fnsel1 = superio_inb(sioaddr, SIO_REG_FNSEL1);
+ sio_data->fnsel1 = superio_inb(gate, SIO_REG_FNSEL1);
break;
default:
printk(KERN_INFO DRVNAME ": Unsupported Fintek device, "
@@ -1512,28 +1485,28 @@ static int __init f71805f_find(int sioad
goto exit;
}
- superio_select(sioaddr, F71805F_LD_HWM);
- if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
+ superio_select(gate, F71805F_LD_HWM);
+ if (!(superio_inb(gate, SIO_REG_ENABLE) & 0x01)) {
printk(KERN_WARNING DRVNAME ": Device not activated, "
"skipping\n");
goto exit;
}
- *address = superio_inw(sioaddr, SIO_REG_ADDR);
- if (*address == 0) {
+ address = superio_inw(gate, SIO_REG_ADDR);
+ if (address == 0) {
printk(KERN_WARNING DRVNAME ": Base address not set, "
"skipping\n");
goto exit;
}
- *address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
+ address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
err = 0;
printk(KERN_INFO DRVNAME ": Found %s chip at %#x, revision %u\n",
- names[sio_data->kind], *address,
- superio_inb(sioaddr, SIO_REG_DEVREV));
+ names[sio_data->kind], address,
+ superio_inb(gate, SIO_REG_DEVREV));
exit:
- superio_exit(sioaddr);
+ superio_exit(gate);
return err;
}
@@ -1543,8 +1516,7 @@ static int __init f71805f_init(void)
unsigned short address;
struct f71805f_sio_data sio_data;
- if (f71805f_find(0x2e, &address, &sio_data)
- && f71805f_find(0x4e, &address, &sio_data))
+ if (f71805f_find(&sio_data))
return -ENODEV;
err = platform_driver_register(&f71805f_driver);
diff -ruNp -X dontdiff -X exclude-diffs
hwmon-fan-push-offset/drivers/hwmon/it87.c
hwmon-superio.old/drivers/hwmon/it87.c
--- hwmon-fan-push-offset/drivers/hwmon/it87.c 2007-10-14 13:00:24.000000000
-0600
+++ hwmon-superio.old/drivers/hwmon/it87.c 2007-10-14 17:22:23.000000000
-0600
@@ -38,6 +38,7 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
+#include <linux/superio-locks.h>
#include <asm/io.h>
#define DRVNAME "it87"
@@ -54,46 +55,6 @@ static struct platform_device *pdev;
#define DEVID 0x20 /* Register: Device ID */
#define DEVREV 0x22 /* Register: Device Revision */
-static inline int
-superio_inb(int reg)
-{
- outb(reg, REG);
- return inb(VAL);
-}
-
-static int superio_inw(int reg)
-{
- int val;
- outb(reg++, REG);
- val = inb(VAL) << 8;
- outb(reg, REG);
- val |= inb(VAL);
- return val;
-}
-
-static inline void
-superio_select(int ldn)
-{
- outb(DEV, REG);
- outb(ldn, VAL);
-}
-
-static inline void
-superio_enter(void)
-{
- outb(0x87, REG);
- outb(0x01, REG);
- outb(0x55, REG);
- outb(0x55, REG);
-}
-
-static inline void
-superio_exit(void)
-{
- outb(0x02, REG);
- outb(0x02, VAL);
-}
-
/* Logical device 4 registers */
#define IT8712F_DEVID 0x8712
#define IT8705F_DEVID 0x8705
@@ -103,6 +64,17 @@ superio_exit(void)
#define IT87_ACT_REG 0x30
#define IT87_BASE_REG 0x60
+static struct superio* gate;
+
+static __devinit struct superio_search where = {
+ .cmdreg_addrs = { REG, 0 },
+ .device_ids = { IT8712F_DEVID, IT8716F_DEVID, IT8718F_DEVID,
+ IT8705F_DEVID, IT8726F_DEVID, 0 },
+ .devid_word = 1,
+ .enter_seq = { 0x87, 0x01, 0x55, 0x55, 0 },
+ .exit_seq = { 0x02, 0x02, 0 }
+};
+
/* Logical device 7 registers (IT8712F and later) */
#define IT87_SIO_PINX2_REG 0x2c /* Pin selection */
#define IT87_SIO_VID_REG 0xfc /* VID value */
@@ -890,10 +862,16 @@ static int __init it87_find(unsigned sho
{
int err = -ENODEV;
u16 chip_type;
+ gate = superio_find(&where);
+ if (!gate) {
+ printk(KERN_WARNING "pc87360: superio port not detected, "
+ "module not intalled.\n");
+ return -ENODEV;
+ }
+ superio_enter(gate);
- superio_enter();
- chip_type = superio_inw(DEVID);
-
+ /* can get this from gate */
+ chip_type = superio_inw(gate, DEVID);
switch (chip_type) {
case IT8705F_DEVID:
sio_data->type = it87;
@@ -916,13 +894,13 @@ static int __init it87_find(unsigned sho
goto exit;
}
- superio_select(PME);
- if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
+ superio_select(gate, PME);
+ if (!(superio_inb(gate, IT87_ACT_REG) & 0x01)) {
pr_info("it87: Device not activated, skipping\n");
goto exit;
}
- *address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
+ *address = superio_inw(gate, IT87_BASE_REG) & ~(IT87_EXTENT - 1);
if (*address == 0) {
pr_info("it87: Base address not set, skipping\n");
goto exit;
@@ -930,17 +908,17 @@ static int __init it87_find(unsigned sho
err = 0;
pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
- chip_type, *address, superio_inb(DEVREV) & 0x0f);
+ chip_type, *address, superio_inb(gate, DEVREV) & 0x0f);
/* Read GPIO config and VID value from LDN 7 (GPIO) */
if (chip_type != IT8705F_DEVID) {
int reg;
- superio_select(GPIO);
+ superio_select(gate, GPIO);
if (chip_type == it8718)
- sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
+ sio_data->vid_value = superio_inb(gate,
IT87_SIO_VID_REG);
- reg = superio_inb(IT87_SIO_PINX2_REG);
+ reg = superio_inb(gate, IT87_SIO_PINX2_REG);
if (reg & (1 << 0))
pr_info("it87: in3 is VCC (+5V)\n");
if (reg & (1 << 1))
@@ -948,7 +926,7 @@ static int __init it87_find(unsigned sho
}
exit:
- superio_exit();
+ superio_exit(gate);
return err;
}
diff -ruNp -X dontdiff -X exclude-diffs
hwmon-fan-push-offset/drivers/hwmon/Kconfig
hwmon-superio.old/drivers/hwmon/Kconfig
--- hwmon-fan-push-offset/drivers/hwmon/Kconfig 2007-10-14 13:00:24.000000000
-0600
+++ hwmon-superio.old/drivers/hwmon/Kconfig 2007-10-14 17:22:23.000000000
-0600
@@ -218,6 +218,7 @@ config SENSORS_DS1621
config SENSORS_F71805F
tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
depends on EXPERIMENTAL
+ select SUPERIO_LOCKS
help
If you say yes here you get support for hardware monitoring
features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
@@ -325,6 +328,7 @@ config SENSORS_IBMPEX
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
select HWMON_VID
+ select SUPERIO_LOCKS
help
If you say yes here you get support for ITE IT8705F, IT8712F,
IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.
@@ -554,6 +564,7 @@ config SENSORS_SMSC47M192
tristate "SMSC LPC47M192 and compatibles"
depends on I2C && EXPERIMENTAL
select HWMON_VID
+ select SUPERIO_LOCKS
help
If you say yes here you get support for the temperature and
voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
@@ -570,6 +581,7 @@ config SENSORS_SMSC47M192
config SENSORS_SMSC47B397
tristate "SMSC LPC47B397-NC"
depends on EXPERIMENTAL
+ select SUPERIO_LOCKS
help
If you say yes here you get support for the SMSC LPC47B397-NC
sensor chip.
@@ -601,6 +613,7 @@ config SENSORS_VT1211
tristate "VIA VT1211"
depends on EXPERIMENTAL
select HWMON_VID
+ select SUPERIO_LOCKS
help
If you say yes here then you get support for hardware monitoring
features of the VIA VT1211 Super-I/O chip.
@@ -686,6 +700,7 @@ config SENSORS_W83627HF
config SENSORS_W83627EHF
tristate "Winbond W83627EHF/DHG"
select HWMON_VID
+ select SUPERIO_LOCKS
help
If you say yes here you get support for the hardware
monitoring functionality of the Winbond W83627EHF Super-I/O chip.
diff -ruNp -X dontdiff -X exclude-diffs
hwmon-fan-push-offset/drivers/hwmon/smsc47b397.c
hwmon-superio.old/drivers/hwmon/smsc47b397.c
--- hwmon-fan-push-offset/drivers/hwmon/smsc47b397.c 2007-10-14
13:00:24.000000000 -0600
+++ hwmon-superio.old/drivers/hwmon/smsc47b397.c 2007-10-14
17:22:23.000000000 -0600
@@ -36,6 +36,7 @@
#include <linux/err.h>
#include <linux/init.h>
#include <linux/mutex.h>
+#include <linux/superio-locks.h>
#include <asm/io.h>
static struct platform_device *pdev;
@@ -44,37 +45,6 @@ static struct platform_device *pdev;
/* Super-I/0 registers and commands */
-#define REG 0x2e /* The register to read/write */
-#define VAL 0x2f /* The value to read/write */
-
-static inline void superio_outb(int reg, int val)
-{
- outb(reg, REG);
- outb(val, VAL);
-}
-
-static inline int superio_inb(int reg)
-{
- outb(reg, REG);
- return inb(VAL);
-}
-
-/* select superio logical device */
-static inline void superio_select(int ld)
-{
- superio_outb(0x07, ld);
-}
-
-static inline void superio_enter(void)
-{
- outb(0x55, REG);
-}
-
-static inline void superio_exit(void)
-{
- outb(0xAA, REG);
-}
-
#define SUPERIO_REG_DEVID 0x20
#define SUPERIO_REG_DEVREV 0x21
#define SUPERIO_REG_BASE_MSB 0x60
@@ -83,6 +53,15 @@ static inline void superio_exit(void)
#define SMSC_EXTENT 0x02
+static struct superio* gate;
+
+static __devinit struct superio_search where = {
+ .cmdreg_addrs = { 0x2e, 0x4e },
+ .device_ids = { 0x6f, 0x81, 0 },
+ .enter_seq = { 0x55, 0 },
+ .exit_seq = { 0xAA, 0 },
+};
+
/* 0 <= nr <= 3 */
static u8 smsc47b397_reg_temp[] = {0x25, 0x26, 0x27, 0x80};
#define SMSC47B397_REG_TEMP(nr) (smsc47b397_reg_temp[(nr)])
@@ -332,26 +311,32 @@ static int __init smsc47b397_find(unsign
{
u8 id, rev;
- superio_enter();
- id = superio_inb(SUPERIO_REG_DEVID);
+ gate = superio_find(&where);
+ if (!gate) {
+ printk(KERN_WARNING "pc87360: superio port not detected, "
+ "module not intalled.\n");
+ return -ENODEV;
+ }
+ superio_enter(gate);
+ id = superio_inb(gate, SUPERIO_REG_DEVID);
if ((id != 0x6f) && (id != 0x81) && (id != 0x85)) {
- superio_exit();
+ superio_exit(gate);
return -ENODEV;
}
- rev = superio_inb(SUPERIO_REG_DEVREV);
+ rev = superio_inb(gate, SUPERIO_REG_DEVREV);
- superio_select(SUPERIO_REG_LD8);
- *addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8)
- | superio_inb(SUPERIO_REG_BASE_LSB);
+ superio_select(gate, SUPERIO_REG_LD8);
+ *addr = (superio_inb(gate, SUPERIO_REG_BASE_MSB) << 8)
+ | superio_inb(gate, SUPERIO_REG_BASE_LSB);
printk(KERN_INFO DRVNAME ": found SMSC %s "
"(base address 0x%04x, revision %u)\n",
id == 0x81 ? "SCH5307-NS" : id == 0x85 ? "SCH5317" :
"LPC47B397-NC", *addr, rev);
- superio_exit();
+ superio_exit(gate);
return 0;
}
diff -ruNp -X dontdiff -X exclude-diffs
hwmon-fan-push-offset/drivers/hwmon/smsc47m1.c
hwmon-superio.old/drivers/hwmon/smsc47m1.c
--- hwmon-fan-push-offset/drivers/hwmon/smsc47m1.c 2007-10-14
13:00:24.000000000 -0600
+++ hwmon-superio.old/drivers/hwmon/smsc47m1.c 2007-10-14 17:22:23.000000000
-0600
@@ -37,6 +37,7 @@
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
+#include <linux/superio-locks.h>
#include <asm/io.h>
static struct platform_device *pdev;
@@ -46,41 +47,18 @@ enum chips { smsc47m1, smsc47m2 };
/* Super-I/0 registers and commands */
-#define REG 0x2e /* The register to read/write */
-#define VAL 0x2f /* The value to read/write */
-
-static inline void
-superio_outb(int reg, int val)
-{
- outb(reg, REG);
- outb(val, VAL);
-}
-
-static inline int
-superio_inb(int reg)
-{
- outb(reg, REG);
- return inb(VAL);
-}
-
-/* logical device for fans is 0x0A */
-#define superio_select() superio_outb(0x07, 0x0A)
-
-static inline void
-superio_enter(void)
-{
- outb(0x55, REG);
-}
-
-static inline void
-superio_exit(void)
-{
- outb(0xAA, REG);
-}
-
#define SUPERIO_REG_ACT 0x30
#define SUPERIO_REG_BASE 0x60
-#define SUPERIO_REG_DEVID 0x20
+
+static struct superio* gate;
+
+static __devinit struct superio_search where = {
+ .cmdreg_addrs = { 0x2e, 0x4e },
+ .device_ids = { 0x51, 0x59, 0x5F, 0x60, 0x6B, 0 },
+ .devid_word = 1,
+ .enter_seq = { 0x55, 0 },
+ .exit_seq = { 0xAA, 0 }
+};
/* Logical device registers */
@@ -398,8 +376,14 @@ static int __init smsc47m1_find(unsigned
{
u8 val;
- superio_enter();
- val = superio_inb(SUPERIO_REG_DEVID);
+ gate = superio_find(&where);
+ if (!gate) {
+ printk(KERN_WARNING "pc87360: superio port not detected, "
+ "module not intalled.\n");
+ return -ENODEV;
+ }
+ superio_enter(gate);
+ val = superio_devid(gate);
/*
* SMSC LPC47M10x/LPC47M112/LPC47M13x (device id 0x59), LPC47M14x
@@ -434,21 +418,20 @@ static int __init smsc47m1_find(unsigned
sio_data->type = smsc47m2;
break;
default:
- superio_exit();
+ superio_exit(gate);
return -ENODEV;
}
-
- superio_select();
- *addr = (superio_inb(SUPERIO_REG_BASE) << 8)
- | superio_inb(SUPERIO_REG_BASE + 1);
- val = superio_inb(SUPERIO_REG_ACT);
+ superio_select(gate, 0x0A);
+ *addr = (superio_inb(gate, SUPERIO_REG_BASE) << 8)
+ | superio_inb(gate, SUPERIO_REG_BASE + 1);
+ val = superio_inb(gate, SUPERIO_REG_ACT);
if (*addr == 0 || (val & 0x01) == 0) {
pr_info(DRVNAME ": Device is disabled, will not use\n");
- superio_exit();
+ superio_exit(gate);
return -ENODEV;
}
- superio_exit();
+ superio_exit(gate);
return 0;
}
diff -ruNp -X dontdiff -X exclude-diffs
hwmon-fan-push-offset/drivers/hwmon/vt1211.c
hwmon-superio.old/drivers/hwmon/vt1211.c
--- hwmon-fan-push-offset/drivers/hwmon/vt1211.c 2007-10-14
13:00:24.000000000 -0600
+++ hwmon-superio.old/drivers/hwmon/vt1211.c 2007-10-14 17:22:23.000000000
-0600
@@ -32,6 +32,7 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/ioport.h>
+#include <linux/superio-locks.h>
#include <asm/io.h>
static int uch_config = -1;
@@ -195,34 +196,15 @@ struct vt1211_data {
/* VT1211 logical device numbers */
#define SIO_VT1211_LDN_HWMON 0x0b /* HW monitor */
-static inline void superio_outb(int sio_cip, int reg, int val)
-{
- outb(reg, sio_cip);
- outb(val, sio_cip + 1);
-}
-
-static inline int superio_inb(int sio_cip, int reg)
-{
- outb(reg, sio_cip);
- return inb(sio_cip + 1);
-}
+static struct superio* gate;
-static inline void superio_select(int sio_cip, int ldn)
-{
- outb(SIO_VT1211_LDN, sio_cip);
- outb(ldn, sio_cip + 1);
-}
-
-static inline void superio_enter(int sio_cip)
-{
- outb(0x87, sio_cip);
- outb(0x87, sio_cip);
-}
-
-static inline void superio_exit(int sio_cip)
-{
- outb(0xaa, sio_cip);
-}
+static __devinit struct superio_search where = {
+ .cmdreg_addrs = { SIO_REG_CIP1, SIO_REG_CIP2 },
+ .device_ids = { SIO_VT1211_ID, 0 },
+ .devid_addr = SIO_VT1211_DEVID,
+ .enter_seq = { 0x87, 0x87, 0 },
+ .exit_seq = { 0xAA, 0 }
+};
/* ---------------------------------------------------------------------
* Device I/O access
@@ -1277,27 +1259,29 @@ EXIT:
return err;
}
-static int __init vt1211_find(int sio_cip, unsigned short *address)
+static int __init vt1211_find(void)
{
int err = -ENODEV;
+ u16 address;
- superio_enter(sio_cip);
-
- if (superio_inb(sio_cip, SIO_VT1211_DEVID) != SIO_VT1211_ID) {
- goto EXIT;
+ gate = superio_find(&where);
+ if (!gate) {
+ printk(KERN_WARNING DRVNAME ": superio port not detected, "
+ "module not intalled.\n");
+ return -ENODEV;
}
+ superio_enter(gate);
+ superio_select(gate, SIO_VT1211_LDN_HWMON);
- superio_select(sio_cip, SIO_VT1211_LDN_HWMON);
-
- if ((superio_inb(sio_cip, SIO_VT1211_ACTIVE) & 1) == 0) {
+ if ((superio_inb(gate, SIO_VT1211_ACTIVE) & 1) == 0) {
printk(KERN_WARNING DRVNAME ": HW monitor is disabled, "
"skipping\n");
goto EXIT;
}
- *address = ((superio_inb(sio_cip, SIO_VT1211_BADDR) << 8) |
- (superio_inb(sio_cip, SIO_VT1211_BADDR + 1))) & 0xff00;
- if (*address == 0) {
+ address = superio_inw(gate, SIO_VT1211_BADDR);
+
+ if (address == 0) {
printk(KERN_WARNING DRVNAME ": Base address is not set, "
"skipping\n");
goto EXIT;
@@ -1305,11 +1289,11 @@ static int __init vt1211_find(int sio_ci
err = 0;
printk(KERN_INFO DRVNAME ": Found VT1211 chip at 0x%04x, "
- "revision %u\n", *address,
- superio_inb(sio_cip, SIO_VT1211_DEVREV));
+ "revision %u\n", address,
+ superio_inb(gate, SIO_VT1211_DEVREV));
EXIT:
- superio_exit(sio_cip);
+ superio_exit(gate);
return err;
}
@@ -1318,10 +1302,8 @@ static int __init vt1211_init(void)
int err;
unsigned short address = 0;
- if ((err = vt1211_find(SIO_REG_CIP1, &address)) &&
- (err = vt1211_find(SIO_REG_CIP2, &address))) {
+ if ((err = vt1211_find()))
goto EXIT;
- }
if ((uch_config < -1) || (uch_config > 31)) {
err = -EINVAL;
diff -ruNp -X dontdiff -X exclude-diffs
hwmon-fan-push-offset/drivers/hwmon/w83627ehf.c
hwmon-superio.old/drivers/hwmon/w83627ehf.c
--- hwmon-fan-push-offset/drivers/hwmon/w83627ehf.c 2007-10-14
13:00:24.000000000 -0600
+++ hwmon-superio.old/drivers/hwmon/w83627ehf.c 2007-10-14 17:22:23.000000000
-0600
@@ -48,6 +48,7 @@
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/mutex.h>
+#include <linux/superio-locks.h>
#include <asm/io.h>
#include "lm75.h"
@@ -80,39 +81,23 @@ static const char * w83627ehf_device_nam
#define SIO_W83627DHG_ID 0xa020
#define SIO_ID_MASK 0xFFF0
-static inline void
-superio_outb(int ioreg, int reg, int val)
-{
- outb(reg, ioreg);
- outb(val, ioreg + 1);
-}
+static struct superio* gate;
-static inline int
-superio_inb(int ioreg, int reg)
-{
- outb(reg, ioreg);
- return inb(ioreg + 1);
-}
-
-static inline void
-superio_select(int ioreg, int ld)
-{
- outb(SIO_REG_LDSEL, ioreg);
- outb(ld, ioreg + 1);
-}
-
-static inline void
-superio_enter(int ioreg)
-{
- outb(0x87, ioreg);
- outb(0x87, ioreg);
-}
+static __devinit struct superio_search where = {
+ .cmdreg_addrs = { 0x2E, 0x4E },
+ .device_ids = { SIO_W83627EHF_ID, SIO_W83627EHG_ID,
+ SIO_W83627DHG_ID, 0 },
+ .devid_mask = SIO_ID_MASK,
+ .devid_word = 1,
+ .enter_seq = { 0x87, 0x87, 0 },
+ .exit_seq = { 0 } /* exit handled by my_superio_exit */
+};
static inline void
-superio_exit(int ioreg)
+my_superio_exit(struct superio * gate)
{
- outb(0x02, ioreg);
- outb(0x02, ioreg + 1);
+ outb(0x02, gate->sioaddr);
+ outb(0x02, gate->sioaddr + 1);
}
/*
@@ -1275,23 +1260,21 @@ static int __devinit w83627ehf_probe(str
w83627ehf_init_device(data);
data->vrm = vid_which_vrm();
- superio_enter(sio_data->sioreg);
+ superio_enter(gate); /*, sio_data->sioreg); */
/* Set VID input sensibility if needed. In theory the BIOS should
have set it, but in practice it's not always the case. */
- en_vrm10 = superio_inb(sio_data->sioreg, SIO_REG_EN_VRM10);
+ en_vrm10 = superio_inb(gate, SIO_REG_EN_VRM10);
if ((en_vrm10 & 0x08) && data->vrm != 100) {
dev_warn(dev, "Setting VID input voltage to TTL\n");
- superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10,
- en_vrm10 & ~0x08);
+ superio_outb(gate, SIO_REG_EN_VRM10, en_vrm10 & ~0x08);
} else if (!(en_vrm10 & 0x08) && data->vrm == 100) {
dev_warn(dev, "Setting VID input voltage to VRM10\n");
- superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10,
- en_vrm10 | 0x08);
+ superio_outb(gate, SIO_REG_EN_VRM10, en_vrm10 | 0x08);
}
/* Read VID value */
- superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
- if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80)
- data->vid = superio_inb(sio_data->sioreg, SIO_REG_VID_DATA) &
0x3f;
+ superio_select(gate, W83627EHF_LD_HWM);
+ if (superio_inb(gate, SIO_REG_VID_CTRL) & 0x80)
+ data->vid = superio_inb(gate, SIO_REG_VID_DATA) & 0x3f;
else {
dev_info(dev, "VID pins in output mode, CPU VID not "
"available\n");
@@ -1300,9 +1283,9 @@ static int __devinit w83627ehf_probe(str
/* fan4 and fan5 share some pins with the GPIO and serial flash */
- fan5pin = superio_inb(sio_data->sioreg, 0x24) & 0x2;
- fan4pin = superio_inb(sio_data->sioreg, 0x29) & 0x6;
- superio_exit(sio_data->sioreg);
+ fan5pin = superio_inb(gate, 0x24) & 0x2;
+ fan4pin = superio_inb(gate, 0x29) & 0x6;
+ my_superio_exit(gate);
/* It looks like fan4 and fan5 pins can be alternatively used
as fan on/off switches, but fan5 control is write only :/
@@ -1425,20 +1408,24 @@ static struct platform_driver w83627ehf_
};
/* w83627ehf_find() looks for a '627 in the Super-I/O config space */
-static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
- struct w83627ehf_sio_data *sio_data)
+static int __init w83627ehf_find(struct w83627ehf_sio_data *sio_data)
{
static const char __initdata sio_name_W83627EHF[] = "W83627EHF";
static const char __initdata sio_name_W83627EHG[] = "W83627EHG";
static const char __initdata sio_name_W83627DHG[] = "W83627DHG";
- u16 val;
+ u16 val, addr;
const char *sio_name;
- superio_enter(sioaddr);
+ gate = superio_find(&where);
+ if (!gate) {
+ printk(KERN_WARNING "pc87360: superio port not detected, "
+ "module not intalled.\n");
+ return -ENODEV;
+ }
+ superio_enter(gate);
+ val = superio_devid(gate);
- val = (superio_inb(sioaddr, SIO_REG_DEVID) << 8)
- | superio_inb(sioaddr, SIO_REG_DEVID + 1);
switch (val & SIO_ID_MASK) {
case SIO_W83627EHF_ID:
sio_data->kind = w83627ehf;
@@ -1456,33 +1443,33 @@ static int __init w83627ehf_find(int sio
if (val != 0xffff)
pr_debug(DRVNAME ": unsupported chip ID: 0x%04x\n",
val);
- superio_exit(sioaddr);
+ my_superio_exit(gate);
return -ENODEV;
}
/* We have a known chip, find the HWM I/O address */
- superio_select(sioaddr, W83627EHF_LD_HWM);
- val = (superio_inb(sioaddr, SIO_REG_ADDR) << 8)
- | superio_inb(sioaddr, SIO_REG_ADDR + 1);
- *addr = val & IOREGION_ALIGNMENT;
- if (*addr == 0) {
+ superio_select(gate, W83627EHF_LD_HWM);
+ val = (superio_inb(gate, SIO_REG_ADDR) << 8)
+ | superio_inb(gate, SIO_REG_ADDR + 1);
+ addr = val & IOREGION_ALIGNMENT;
+ if (addr == 0) {
printk(KERN_ERR DRVNAME ": Refusing to enable a Super-I/O "
"device with a base I/O port 0.\n");
- superio_exit(sioaddr);
+ my_superio_exit(gate);
return -ENODEV;
}
/* Activate logical device if needed */
- val = superio_inb(sioaddr, SIO_REG_ENABLE);
+ val = superio_inb(gate, SIO_REG_ENABLE);
if (!(val & 0x01)) {
printk(KERN_WARNING DRVNAME ": Forcibly enabling Super-I/O. "
"Sensor is probably unusable.\n");
- superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
+ superio_outb(gate, SIO_REG_ENABLE, val | 0x01);
}
- superio_exit(sioaddr);
- pr_info(DRVNAME ": Found %s chip at %#x\n", sio_name, *addr);
- sio_data->sioreg = sioaddr;
+ my_superio_exit(gate);
+ pr_info(DRVNAME ": Found %s chip at %#x\n", sio_name, addr);
+ sio_data->sioreg = gate->sioaddr;
return 0;
}
@@ -1496,7 +1483,7 @@ static struct platform_device *pdev;
static int __init sensors_w83627ehf_init(void)
{
int err;
- unsigned short address;
+ unsigned short address = 0;
struct resource res;
struct w83627ehf_sio_data sio_data;
@@ -1505,8 +1492,7 @@ static int __init sensors_w83627ehf_init
* when Super-I/O functions move to a separate file, the Super-I/O
* driver will probe 0x2e and 0x4e and auto-detect the presence of a
* w83627ehf hardware monitor, and call probe() */
- if (w83627ehf_find(0x2e, &address, &sio_data) &&
- w83627ehf_find(0x4e, &address, &sio_data))
+ if (w83627ehf_find(&sio_data))
return -ENODEV;
err = platform_driver_register(&w83627ehf_driver);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
