Add pwr and status leds configuration and turn on pwr led by default for Orange
Pi Zero Plus 2 (both H3 and H5 variants).

Signed-off-by: Diego Rondini <diego.rond...@kynetics.com>
---
 .../boot/dts/sun8i-h3-orangepi-zero-plus2.dts    | 16 ++++++++++++++++
 .../allwinner/sun50i-h5-orangepi-zero-plus2.dts  | 16 ++++++++++++++++
 2 files changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts 
b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
index 4376767699a47..4cd0ac706bd2c 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
@@ -82,6 +82,22 @@ wifi_pwrseq: wifi_pwrseq {
                reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
                post-power-on-delay-ms = <200>;
        };
+
+       leds {
+               compatible = "gpio-leds";
+
+               pwr_led {
+                       label = "orangepi:green:pwr";
+                       gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+               };
+
+               status_led {
+                       label = "orangepi:red:status";
+                       gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+               };
+
+       };
 };
 
 &de {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts 
b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index d8192a7483e9e..517d53e1b0ff1 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -42,6 +42,22 @@ wifi_pwrseq: wifi_pwrseq {
                reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
                post-power-on-delay-ms = <200>;
        };
+
+       leds {
+               compatible = "gpio-leds";
+
+               pwr_led {
+                       label = "orangepi:green:pwr";
+                       gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+               };
+
+               status_led {
+                       label = "orangepi:red:status";
+                       gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+               };
+
+       };
 };
 
 &de {
-- 
2.25.4

Reply via email to