Hi, On Fri, May 29, 2020 at 06:02:04PM +0200, Pavel Machek wrote: > > ping? > > Well, I thought that we maybe do not need standard LEDs on medical hardware.
The discussion died and the patch was not applied :) In general
IDK how worthwhile it is to use standard LED names for them. I
suppose the number of people planning to create something like
OpenWRT for medical devices is not so big.
> > On Fri, Apr 24, 2020 at 02:44:23PM +0200, Sebastian Reichel wrote:
> > > On Fri, Apr 24, 2020 at 11:32:26AM +0200, Pavel Machek wrote:
> > > > On Thu 2020-04-16 16:51:23, Sebastian Reichel wrote:
> > > > > From: Ian Ray <ian....@ge.com>
> > > > >
> > > > > Use kernel LED interface for the alarm LEDs.
> > > >
> > > > Could we get these changes cced to LED maintainers?
> > >
> > > Sorry, you are not turning up via get_maintainer.pl and usually
> > > subsystem maintainers are not CC'd for every DT device instance.
> > > E.g. I do not want to be always CC'd for DT board file containing
> > > a battery/charger. I'm quite surprised you want to be CC'd for
> > > them, just looking at ARM DT files there are over 1000 instances
> > > of leds.
>
> Well, we have mess in the naming; I'd like to clear it up.
I understand.
> > > > > + alarm1 {
> > > > > + label = "alarm:red";
> > > > > + gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
> > > > > + };
> > > >
> > > > So... What is function of these leds, and can we get naming more
> > > > consistent with rest of the kernel?
> > >
> > > The device is a medical patient monitor and these are alarm LEDs
> > > informing about critical device or patient status. They are
> > > referenced by their color (those are discrete LEDs, not a
> > > multi-color one) basically everywhere. The only exception is
> > > "silenced", which means that audible alarm is surpressed. I
> > > don't think we have something comparable for any of those LEDs
> > > in the mainline tree.
>
> Actually, we have "platform:*:mute" LEDs, that could be used for
> "silenced".
I see you point, but wonder if mute is the right choice. The LED
signals a silenced alarm, which IMHO is not the same:
* The alarm silencing is temporary and system unsilences after
1-2 minutes.
* LED is usually blinking instead of solid like a laptop mute LED
(so that operator is aware of silenced alarm)
* Device usually cannot be put into silenced mode before the alarm
appears
* Some medical devices still generate perodic beeps
AFAIK this is named alarm silencing by basically everyone for
medical devices. So I think naming this platfrom:*:mute would
increase the mess.
-- Sebastian
signature.asc
Description: PGP signature
