oProfile Driver Module Patch for AMD Family10h Kernel 2.6.23
This patch is for controlling the upper 32bits of the event ctrl msrs.
This includes the upper 4 bits of the event select and the Guest Only
and Host Only bits
This patch is necessary to make Event Based Profiling work reliably on a
Family10h processor
---
op_model_athlon.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
---
Signed-off-by: Barry Kasindorf <[EMAIL PROTECTED]>
Signed-off-by: Robert Richter <[EMAIL PROTECTED]>
diff -Naur linux-2.6.23.orig/arch/i386/oprofile/op_model_athlon.c
linux-2.6.23.pmc/arch/i386/oprofile/op_model_athlon.c
--- linux-2.6.23.orig/arch/i386/oprofile/op_model_athlon.c 2007-10-09
16:31:38.000000000 -0400
+++ linux-2.6.23.pmc/arch/i386/oprofile/op_model_athlon.c 2007-10-15
11:02:39.000000000 -0400
@@ -1,6 +1,6 @@
/**
* @file op_model_athlon.h
- * athlon / K7 model-specific MSR operations
+ * athlon / K7 / K8 / Family10h model-specific MSR operations
*
* @remark Copyright 2002 OProfile authors
* @remark Read the file COPYING
@@ -31,12 +31,16 @@
#define CTRL_WRITE(l,h,msrs,c) do {wrmsr(msrs->controls[(c)].addr,
(l), (h));} while (0)
#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
-#define CTRL_CLEAR(x) (x &= (1<<21))
+#define CTRL_CLEAR_LO(x) (x &= (1<<21))
+#define CTRL_CLEAR_HI(x) ( x &= 0xfffffcf0 )
#define CTRL_SET_ENABLE(val) (val |= 1<<20)
#define CTRL_SET_USR(val,u) (val |= ((u & 1) << 16))
#define CTRL_SET_KERN(val,k) (val |= ((k & 1) << 17))
#define CTRL_SET_UM(val, m) (val |= (m << 8))
-#define CTRL_SET_EVENT(val, e) (val |= e)
+#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
+#define CTRL_SET_EVENT_HIGH(val,e) (val |= ((e >> 8) & 0xf))
+#define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9))
+#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8))
static unsigned long reset_value[NUM_COUNTERS];
@@ -70,7 +74,8 @@
if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
continue;
CTRL_READ(low, high, msrs, i);
- CTRL_CLEAR(low);
+ CTRL_CLEAR_LO(low);
+ CTRL_CLEAR_HI(low);
CTRL_WRITE(low, high, msrs, i);
}
@@ -89,12 +94,17 @@
CTR_WRITE(counter_config[i].count, msrs, i);
CTRL_READ(low, high, msrs, i);
- CTRL_CLEAR(low);
+ CTRL_CLEAR_LO(low);
+ CTRL_CLEAR_HI(high);
CTRL_SET_ENABLE(low);
CTRL_SET_USR(low, counter_config[i].user);
CTRL_SET_KERN(low, counter_config[i].kernel);
CTRL_SET_UM(low, counter_config[i].unit_mask);
- CTRL_SET_EVENT(low, counter_config[i].event);
+ CTRL_SET_EVENT_LOW(low, counter_config[i].event);
+ CTRL_SET_EVENT_HIGH(high, counter_config[i].event);
+ CTRL_SET_HOST_ONLY(high, 0);
+ CTRL_SET_GUEST_ONLY(high, 0);
+
CTRL_WRITE(low, high, msrs, i);
} else {
reset_value[i] = 0;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/