[PATCH] gpio: arizona: put pm_runtime in case of failure

[Navid Emamdoost]

Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not called in
error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.

Signed-off-by: Navid Emamdoost <navid.emamdo...@gmail.com>
---
 drivers/gpio/gpio-arizona.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
index 7520a13b4c7c..5bda38e0780f 100644
--- a/drivers/gpio/gpio-arizona.c
+++ b/drivers/gpio/gpio-arizona.c
@@ -64,6 +64,7 @@ static int arizona_gpio_get(struct gpio_chip *chip, unsigned 
offset)
                ret = pm_runtime_get_sync(chip->parent);
                if (ret < 0) {
                        dev_err(chip->parent, "Failed to resume: %d\n", ret);
+                       pm_runtime_put_autosuspend(chip->parent);
                        return ret;
                }
 
@@ -72,12 +73,15 @@ static int arizona_gpio_get(struct gpio_chip *chip, 
unsigned offset)
                if (ret < 0) {
                        dev_err(chip->parent, "Failed to drop cache: %d\n",
                                ret);
+                       pm_runtime_put_autosuspend(chip->parent);
                        return ret;
                }
 
                ret = regmap_read(arizona->regmap, reg, &val);
-               if (ret < 0)
+               if (ret < 0) {
+                       pm_runtime_put_autosuspend(chip->parent);
                        return ret;
+               }
 
                pm_runtime_mark_last_busy(chip->parent);
                pm_runtime_put_autosuspend(chip->parent);
-- 
2.17.1