This patch documents Tegra VI and CSI port and endpoint nodes along with the other required properties.
Signed-off-by: Sowjanya Komatineni <[email protected]> --- .../display/tegra/nvidia,tegra20-host1x.txt | 87 ++++++++++++++++++++++ 1 file changed, 87 insertions(+) diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index 4731921..f70a838 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -65,6 +65,48 @@ of the following host1x client modules: - power-domains: Must include sor powergate node as csicil is in SOR partition. + Optional properties for csi node: + + - channel nodes: Max upto 6 channels/streams are supported with each CSI + brick can as either x4 or x2 based on hw connectivity to sensor. + + Required properties: + - reg: channel/stream index + - nvidia,mipi-calibrate: Should contain a phandle and a specifier + specifying which pads are used by this CSI port and need to be + calibrated. See also ../display/tegra/nvidia,tegra114-mipi.txt. + + - port: CSI port node and its endpoint nodes as per device graph + bindings defined in Documentation/devicetree/bindings/graph.txt. + Required properties: + - reg: csi port index based on hw csi lanes connectivity to the + sensor. + - bus-width: number of lanes used by this port. Supported lanes + are 1/2/4. + - endpoint@0: sink node + Required properties: + - reg: endpoint id. This is used to retrieve pad for creating + media link + - remote-endpoint: phandle to sensor endpoint + - endpoint@1: source node + - reg: endpoint id. This is used to retrieve pad for creating + media link + - remote-endpoint: phandle to vi port endpoint + + Optional properties for vi node: + - ports: Video port nodes and endpoint nodes as per device graph bindings + defined in Documentation/devicetree/bindings/graph.txt + Max 6 ports are supported and each port should have one endpoint node. + + Required properties: + - port: VI port node and its sink endpoint node + Required properties: + - reg: should match port index + - endpoint@0: sink node + Required properties: + - reg: endpoint id must be 0 + - remote-endpoint: phandle to CSI endpoint node. + - epp: encoder pre-processor Required properties: @@ -340,6 +382,22 @@ Example: ranges = <0x0 0x0 0x54080000 0x2000>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + imx219_vi_in0: endpoint@0 { + reg = <0>; + remote-endpoint = <&imx219_csi_out0>; + }; + }; + }; + csi@838 { compatible = "nvidia,tegra210-csi"; reg = <0x838 0x1300>; @@ -362,6 +420,35 @@ Example: <&tegra_car TEGRA210_CLK_CSI_TPG>; clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg"; power-domains = <&pd_sor>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + nvidia,mipi-calibrate = <&mipi 0x001>; + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bus-width = <2>; + + #address-cells = <1>; + #size-cells = <0>; + + imx219_csi_in0: endpoint@0 { + reg = <0>; + remote-endpoint = <&imx219_out0>; + }; + + imx219_csi_out0: endpoint@1 { + reg = <1>; + remote-endpoint = <&imx219_vi_in0>; + }; + }; + }; }; }; -- 2.7.4
