[PATCH] drm/bridge: fix reference count leaks due to pm_runtime_get_sync()

[Aditya Pakki]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Signed-off-by: Aditya Pakki <pakki...@umn.edu>
---
 drivers/gpu/drm/bridge/cdns-dsi.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/cdns-dsi.c 
b/drivers/gpu/drm/bridge/cdns-dsi.c
index 69c3892caee5..583cb8547106 100644
--- a/drivers/gpu/drm/bridge/cdns-dsi.c
+++ b/drivers/gpu/drm/bridge/cdns-dsi.c
@@ -788,8 +788,10 @@ static void cdns_dsi_bridge_enable(struct drm_bridge 
*bridge)
        u32 tmp, reg_wakeup, div;
        int nlanes;
 
-       if (WARN_ON(pm_runtime_get_sync(dsi->base.dev) < 0))
+       if (WARN_ON(pm_runtime_get_sync(dsi->base.dev) < 0)) {
+               pm_runtime_put(dsi->base.dev);
                return;
+       }
 
        mode = &bridge->encoder->crtc->state->adjusted_mode;
        nlanes = output->dev->lanes;
@@ -1028,8 +1030,10 @@ static ssize_t cdns_dsi_transfer(struct mipi_dsi_host 
*host,
        int ret, i, tx_len, rx_len;
 
        ret = pm_runtime_get_sync(host->dev);
-       if (ret < 0)
+       if (ret < 0) {
+               pm_runtime_put(host->dev);
                return ret;
+       }
 
        cdns_dsi_init_link(dsi);
 
-- 
2.25.1