On Thu, May 28, 2020 at 10:47:12PM +0200, Diego Rondini wrote:
> Add pwr and status leds configuration and turn on pwr led by default for
> Orange
> Pi Zero Plus 2 (both H3 and H5 variants).
>
> Signed-off-by: Diego Rondini <diego.rond...@kynetics.com>
> ---
> .../boot/dts/sun8i-h3-orangepi-zero-plus2.dts | 16 ++++++++++++++++
> .../allwinner/sun50i-h5-orangepi-zero-plus2.dts | 16 ++++++++++++++++
> 2 files changed, 32 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
> b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
> index 4376767699a47..4cd0ac706bd2c 100644
> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
> @@ -82,6 +82,22 @@ wifi_pwrseq: wifi_pwrseq {
> reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
> post-power-on-delay-ms = <200>;
> };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + pwr_led {
> + label = "orangepi:green:pwr";
> + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + };
> +
> + status_led {Having an underscore in the node name will trigger a DTC warning. What about using pwr and status as nodenames? > + label = "orangepi:red:status"; > + gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; > + }; > + There's an extra line here that you should remove Maxime
signature.asc
Description: PGP signature
