Hi Dillon
On 6/9/20 3:26 PM, [email protected] wrote:
From: dillon min <[email protected]>
This patchset is intend to enable stmpe811 touch screen on stm32f429-disco
board with three dts and one i2c driver changes.
has been validated by ts_print tool
Changes log:
V4: indroduce 'IIC_LAST_BYTE_POS' to compatible with xipkernel boot
V3: just add change log in [PATCH V3 3/4] below ---
V2: remove id, blocks, irq-trigger from stmpe811 dts
V1:
ARM: dts: stm32: add I2C3 support on STM32F429 SoC
ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
ARM: dts: stm32: enable stmpe811 on stm32429-disco board
i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
dillon min (4):
ARM: dts: stm32: add I2C3 support on STM32F429 SoC
ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
ARM: dts: stm32: enable stmpe811 on stm32429-disco board
i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 12 +++++++++
arch/arm/boot/dts/stm32f429-disco.dts | 47 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/stm32f429.dtsi | 12 +++++++++
drivers/i2c/busses/i2c-stm32f4.c | 12 ++++++---
4 files changed, 80 insertions(+), 3 deletions(-)
DT patches applied on stm32-next. I changed node ordering in patch 3.
Thanks
Alex
