On Thu, Jun 11, 2020 at 11:11:40PM +0200, Luca Ceresoli wrote: > The Xilinx 7-series uses the same protocol, mention that. > > Signed-off-by: Luca Ceresoli <l...@lucaceresoli.net> Acked-by: Moritz Fischer <m...@kernel.org> > --- > .../devicetree/bindings/fpga/xilinx-slave-serial.txt | 9 ++++++--- > 1 file changed, 6 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt > b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt > index cfa4ed42b62f..9f103f3872e8 100644 > --- a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt > +++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt > @@ -1,11 +1,14 @@ > Xilinx Slave Serial SPI FPGA Manager > > -Xilinx Spartan-6 FPGAs support a method of loading the bitstream over > -what is referred to as "slave serial" interface. > +Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the > +bitstream over what is referred to as "slave serial" interface. > The slave serial link is not technically SPI, and might require extra > circuits in order to play nicely with other SPI slaves on the same bus. > > -See https://www.xilinx.com/support/documentation/user_guides/ug380.pdf > +See: > +- https://www.xilinx.com/support/documentation/user_guides/ug380.pdf > +- > https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf > +- > https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf > > Required properties: > - compatible: should contain "xlnx,fpga-slave-serial" > -- > 2.27.0 >
