On Fri, 19 Oct 2007 20:52:52 +0200 Németh Márton wrote:
> From: Márton Németh <[EMAIL PROTECTED]>
>
> The driver supports the mail LED commonly found on different Clevo notebooks.
> The driver access the LED through the i8042 hardware and implements the
> support for
> hardware accelerated blink function.
>
> Signed-off-by: Márton Németh <[EMAIL PROTECTED]>
> ---
> diff -uprN linux-2.6.23.orig/drivers/leds/Kconfig
> linux-2.6.23/drivers/leds/Kconfig
> --- linux-2.6.23.orig/drivers/leds/Kconfig 2007-10-09 22:31:38.000000000
> +0200
> +++ linux-2.6.23/drivers/leds/Kconfig 2007-10-18 07:20:12.000000000 +0200
> @@ -101,6 +101,26 @@ config LEDS_GPIO
> outputs. To be useful the particular board must have LEDs
> and they must be connected to the GPIO lines.
>
> +config LEDS_CLEVO_MAIL
> + tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
> + depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL
> + help
> + This driver makes the mail LED accessible from userspace
> + programs through the leds subsystem. This LED can blink at
> + about 0.5Hz and 1Hz.
?:
can blink 1 time every 1 or 2 seconds.
> + This module can drive the mail LED for the following notebooks:
> +
> + Clevo D410J
> + Clevo D410V
> + Clevo D400V/D470V (not tested, but might work)
> + Clevo M540N
> + Clevo M5x0N (not tested, but might work)
> + Positivo Mobile (Clevo M5x0V)
> +
> + To compile this driver as a module, choose M here: the
> + module will be called leds-clevo-mail.
> +
> comment "LED Triggers"
>
> config LEDS_TRIGGERS
> diff -uprN linux-2.6.23.orig/drivers/leds/leds-clevo-mail.c
> linux-2.6.23/drivers/leds/leds-clevo-mail.c
> --- linux-2.6.23.orig/drivers/leds/leds-clevo-mail.c 1970-01-01
> 01:00:00.000000000 +0100
> +++ linux-2.6.23/drivers/leds/leds-clevo-mail.c 2007-10-18
> 07:17:56.000000000 +0200
> @@ -0,0 +1,226 @@
> +
> +#include <linux/module.h>
> +
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/leds.h>
> +
> +#include <linux/io.h>
> +#include <linux/dmi.h>
> +
> +#include <linux/i8042.h>
> +
> +
> +#define TRUE 1
> +#define FALSE 0
Just use true / false.
> +#define HANDLED 0
> +
> +#define CLEVO_MAIL_LED_OFF 0x0084
> +#define CLEVO_MAIL_LED_BLINK_1HZ 0x008A
> +#define CLEVO_MAIL_LED_BLINK_0_5HZ 0x0083
> +
> +#define MODULE_FNAME "leds-clevo-mail.c"
> +#define DRVNAME "clevo-mail-led"
Kbuild provides KBUILD_BASENAME and KBUILD_MODNAME. Can you use
one of those?
> +#define NO_RESOURCES NULL
Just use NULL.
> +MODULE_AUTHOR("Márton Németh <[EMAIL PROTECTED]>");
> +MODULE_DESCRIPTION("Clevo mail LED driver");
> +MODULE_LICENSE("GPL");
> +
> +
> +static int __init clevo_mail_led_dmi_callback(struct dmi_system_id *id)
> +{
> + printk(KERN_INFO MODULE_FNAME ": '%s' found\n", id->ident);
MODULE_FNAME string looks too long and out of place here.
> + return 1;
> +}
> +
> +/**
/** introduces kernel-doc, but there is no following kernel-doc....,
so just use /*, please.
> + * struct mail_led_whitelist - List of known good models
> + *
> + * Contains the known good models this driver is compatible with.
> + * When adding a new model try to be as strict as possible. This
> + * makes it possible to keep the false positives (the model is
> + * detected as working, but in reality it is not) as low as
> + * possible.
> + */
> +static struct dmi_system_id __initdata mail_led_whitelist[] = {
> + {
...
> + { }
> +};
> +
> +
> +
> +static struct led_classdev clevo_mail_led = {
> + .name = "clevo::mail",
What's the purpose of the "::"?
> + .brightness_set = clevo_mail_led_set,
> + .blink_set = clevo_mail_led_blink,
> +};
> +
> +
> +static struct platform_driver clevo_mail_led_driver = {
> + .probe = clevo_mail_led_probe,
> + .remove = clevo_mail_led_remove,
> +#ifdef CONFIG_PM
> + .suspend = clevo_mail_led_suspend,
> + .resume = clevo_mail_led_resume,
> +#endif
> + .driver = {
> + .name = DRVNAME,
> + },
> +};
We prefer to have clevo_mail_led_susped() and _resume() defined
all the time, so that the above ifdef & endif can go away, so
do more like:
#ifdef CONFIG_PM
/* those functions as you have them */
#else
#define clevo_mail_led_suspend NULL
#define clevo_mail_led_resume NULL
#endif
> +static int __init clevo_mail_led_init(void)
> +{
> + int error = 0;
> + int count = 0;
> +
> + /* Check with the help of DMI if we are running on supported hardware */
> + if (!nodetect) {
> + count = dmi_check_system(mail_led_whitelist);
> + } else {
> + count = 1;
> + printk(KERN_ERR MODULE_FNAME ": Skipping DMI detection. "
> + "If the driver works on your hardware please "
> + "report model and the output of dmidecode in tracker "
> + "at http://sourceforge.net/projects/clevo-mailled/\n";);
> + }
> +
> + if (!count) {
> + return -ENODEV;
> + }
Don't use braces on one-statement/one-line "blocks."
> + pdev = platform_device_register_simple(DRVNAME, -1, NO_RESOURCES, 0);
> + if (!IS_ERR(pdev)) {
> + error = platform_driver_probe(&clevo_mail_led_driver,
> + clevo_mail_led_probe);
> + if (error) {
> + printk(KERN_ERR MODULE_FNAME
Use the module logical name, not source file name.
> + ": Can't probe platform driver\n");
> + platform_device_unregister(pdev);
> + }
> + } else {
> + error = PTR_ERR(pdev);
> + }
> +
> + return error;
> +}
---
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
