On 18/06/2020 13:54, chao hao wrote:
> On Wed, 2020-06-17 at 11:33 +0200, Matthias Brugger wrote:
>>
>> On 17/06/2020 05:00, Chao Hao wrote:
>>> 1. Start from mt6779, INVLDT_SEL move to offset=0x2c, so we add
>>> REG_MMU_INV_SEL_GEN2 definition and mt6779 uses it.
>>> 2. Change PROTECT_PA_ALIGN from 128 byte to 256 byte.
>>> 3. For REG_MMU_CTRL_REG register, we only need to change bit[2:0],
>>> others bits keep default value, ex: enable victim tlb.
>>> 4. Add mt6779_data to support mm_iommu HW init.
>>>
>>> Change since v3:
>>> 1. When setting MMU_CTRL_REG, we don't need to include mt8173.
>>>
>>> Cc: Yong Wu <yong...@mediatek.com>
>>> Signed-off-by: Chao Hao <chao....@mediatek.com>
>>> ---
>>> drivers/iommu/mtk_iommu.c | 20 ++++++++++++++++++--
>>> drivers/iommu/mtk_iommu.h | 1 +
>>> 2 files changed, 19 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
>>> index c706bca6487e..def2e996683f 100644
>>> --- a/drivers/iommu/mtk_iommu.c
>>> +++ b/drivers/iommu/mtk_iommu.c
>>> @@ -37,6 +37,11 @@
>>> #define REG_MMU_INVLD_START_A 0x024
>>> #define REG_MMU_INVLD_END_A 0x028
>>>
>>> +/* In latest Coda, MMU_INV_SEL's offset is changed to 0x02c.
>>> + * So we named offset = 0x02c to "REG_MMU_INV_SEL_GEN2"
>>> + * and offset = 0x038 to "REG_MMU_INV_SEL_GEN1".
>>> + */
>>
>> Please delete the comment, this should be understandable from the git history
>
> ok, thanks
>
>>
>>> +#define REG_MMU_INV_SEL_GEN2 0x02c
>>> #define REG_MMU_INV_SEL_GEN1 0x038
>>> #define F_INVLD_EN0 BIT(0)
>>> #define F_INVLD_EN1 BIT(1)
>>> @@ -98,7 +103,7 @@
>>> #define F_MMU_INT_ID_LARB_ID(a) (((a) >> 7) & 0x7)
>>> #define F_MMU_INT_ID_PORT_ID(a) (((a) >> 2) & 0x1f)
>>>
>>> -#define MTK_PROTECT_PA_ALIGN 128
>>> +#define MTK_PROTECT_PA_ALIGN 256
>>
>> Do we need 512 bytes for all gen2 IOMMUs?
>> I'm not sure if we should add this in plat_data or if we should just bump up
>> the
>> value for all SoCs.
>> In both cases this should be a separate patch.
>>
> From mt6779, MTK_PROTECT_PA_ALIGN is extend to 256 bytes and don't be
> changed for a long time from our HW designer comment. The legacy iommu
> also can use it, mabye it doesn't set it by platform.
>
Ok then just bump it to 256 in a new patch. Thanks for clarification.
>
>>>
>>> /*
>>> * Get the local arbiter ID and the portid within the larb arbiter
>>> @@ -543,11 +548,12 @@ static int mtk_iommu_hw_init(const struct
>>> mtk_iommu_data *data)
>>> return ret;
>>> }
>>>
>>> + regval = readl_relaxed(data->base + REG_MMU_CTRL_REG);
>>> if (data->plat_data->m4u_plat == M4U_MT8173)
>>> regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
>>> F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
>>> else
>>> - regval = F_MMU_TF_PROT_TO_PROGRAM_ADDR;
>>> + regval |= F_MMU_TF_PROT_TO_PROGRAM_ADDR;
>>
>> Why do we change this, is it that the bootloader for mt6779 set some values
>> in
>> the register we have to keep? In this case I think we should update the
>> regval
>> accordingly.
>
> For REG_MMU_CTRL_REG, bit[12] represents victim_tlb_en feature and
> victim_tlb is enable defaultly(bit[12]=1),but if we use "regval =
> F_MMU_TF_PROT_TO_PROGRAM_ADDR", victim_tlb will disable, it will drop
> iommu performace for mt6779
>
Got it. Please put that in a separate patch then.
Regards,
Matthias
>
>>
>>> writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);
>>>
>>> regval = F_L2_MULIT_HIT_EN |
>>> @@ -797,6 +803,15 @@ static const struct mtk_iommu_plat_data mt2712_data = {
>>> .larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
>>> };
>>>
>>> +static const struct mtk_iommu_plat_data mt6779_data = {
>>> + .m4u_plat = M4U_MT6779,
>>> + .has_sub_comm = true,
>>> + .has_wr_len = true,
>>> + .has_misc_ctrl = true,
>>> + .inv_sel_reg = REG_MMU_INV_SEL_GEN2,
>>> + .larbid_remap = {{0}, {1}, {2}, {3}, {5}, {7, 8}, {10}, {9}},
>>> +};
>>> +
>>> static const struct mtk_iommu_plat_data mt8173_data = {
>>> .m4u_plat = M4U_MT8173,
>>> .has_4gb_mode = true,
>>> @@ -815,6 +830,7 @@ static const struct mtk_iommu_plat_data mt8183_data = {
>>>
>>> static const struct of_device_id mtk_iommu_of_ids[] = {
>>> { .compatible = "mediatek,mt2712-m4u", .data = &mt2712_data},
>>> + { .compatible = "mediatek,mt6779-m4u", .data = &mt6779_data},
>>> { .compatible = "mediatek,mt8173-m4u", .data = &mt8173_data},
>>> { .compatible = "mediatek,mt8183-m4u", .data = &mt8183_data},
>>> {}
>>> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
>>> index 9971cedd72ea..fb79e710c8d9 100644
>>> --- a/drivers/iommu/mtk_iommu.h
>>> +++ b/drivers/iommu/mtk_iommu.h
>>> @@ -31,6 +31,7 @@ struct mtk_iommu_suspend_reg {
>>> enum mtk_iommu_plat {
>>> M4U_MT2701,
>>> M4U_MT2712,
>>> + M4U_MT6779,
>>> M4U_MT8173,
>>> M4U_MT8183,
>>> };
>>>
>