Hi Sven,
On Sat, Jun 13, 2020 at 5:17 PM Sven Van Asbroeck <[email protected]> wrote:
> + /*
> + * On imx6 plus, enet_ref from ANATOP/CCM can be internally routed to
> + * be the PTP clock source, instead of having to be routed through
> + * pads.
> + * Board designs which route the ANATOP/CCM clock through pads are
> + * unaffected when routing happens internally. So on these designs,
> + * route internally by default.
> + */
> + if (clksel == IMX6Q_GPR1_ENET_CLK_SEL_ANATOP && cpu_is_imx6q() &&
> + imx_get_soc_revision() >= IMX_CHIP_REVISION_2_0) {
You should limit this to imx6 quad plus only, so you would better
check against "fsl,imx6qp".
