On 2020-06-23 01:47, Lee Jones wrote:
> On Mon, 22 Jun 2020, Frank Rowand wrote:
>
>> On 2020-06-22 14:11, Lee Jones wrote:
>>> On Mon, 22 Jun 2020, Frank Rowand wrote:
>>>
>>>> On 2020-06-22 10:10, Lee Jones wrote:
>>>>> On Mon, 22 Jun 2020, Frank Rowand wrote:
>>>>>
>>>>>> On 2020-06-22 03:50, Lee Jones wrote:
>>>>>>> On Thu, 18 Jun 2020, Frank Rowand wrote:
>>>>>>>
>>>>>>>> On 2020-06-15 04:26, Lee Jones wrote:
>>>>>>>>> On Sun, 14 Jun 2020, Frank Rowand wrote:
>>>>>>>>>
>>>>>>>>>> Hi Lee,
>>>>>>>>>>
>>>>>>>>>> I'm looking at 5.8-rc1.
>>>>>>>>>>
>>>>>>>>>> The only use of OF_MFD_CELL() where the same compatible is specified
>>>>>>>>>> for multiple elements of a struct mfd_cell array is for compatible
>>>>>>>>>> "stericsson,ab8500-pwm" in drivers/mfd/ab8500-core.c:
>>>>>>>>>>
>>>>>>>>>> OF_MFD_CELL("ab8500-pwm",
>>>>>>>>>> NULL, NULL, 0, 1, "stericsson,ab8500-pwm"),
>>>>>>>>>> OF_MFD_CELL("ab8500-pwm",
>>>>>>>>>> NULL, NULL, 0, 2, "stericsson,ab8500-pwm"),
>>>>>>>>>> OF_MFD_CELL("ab8500-pwm",
>>>>>>>>>> NULL, NULL, 0, 3, "stericsson,ab8500-pwm"),
>>>>>>>>
>>>>>>>> OF_MFD_CELL("ab8500-pwm",
>>>>>>>> NULL, NULL, 0, 0, "stericsson,ab8500-pwm"),
>>>>>>>>
>>>>>>>> OF_MFD_CELL_REG("ab8500-pwm-mc",
>>>>>>>> NULL, NULL, 0, 0, "stericsson,ab8500-pwm", 0),
>>>>>>>> OF_MFD_CELL_REG("ab8500-pwm-mc",
>>>>>>>> NULL, NULL, 0, 1, "stericsson,ab8500-pwm", 1),
>>>>>>>> OF_MFD_CELL_REG("ab8500-pwm-mc",
>>>>>>>> NULL, NULL, 0, 2, "stericsson,ab8500-pwm", 2),
>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> The only .dts or .dtsi files where I see compatible
>>>>>>>>>> "stericsson,ab8500-pwm"
>>>>>>>>>> are:
>>>>>>>>>>
>>>>>>>>>> arch/arm/boot/dts/ste-ab8500.dtsi
>>>>>>>>>> arch/arm/boot/dts/ste-ab8505.dtsi
>>>>>>>>>>
>>>>>>>>>> These two .dtsi files only have a single node with this compatible.
>>>>>>>>>> Chasing back to .dts and .dtsi files that include these two .dtsi
>>>>>>>>>> files, I see no case where there are multiple nodes with this
>>>>>>>>>> compatible.
>>>>>>>>>>
>>>>>>>>>> So it looks to me like there is no .dts in mainline that is providing
>>>>>>>>>> the three "stericsson,ab8500-pwm" nodes that
>>>>>>>>>> drivers/mfd/ab8500-core.c
>>>>>>>>>> is expecting. No case that there are multiple mfd child nodes where
>>>>>>>>>> mfd_add_device() would assign the first of n child nodes with the
>>>>>>>>>> same compatible to multiple devices.
>>>>>>>>>>
>>>>>>>>>> So it appears to me that drivers/mfd/ab8500-core.c is currently
>>>>>>>>>> broken.
>>>>>>>>>> Am I missing something here?
>>>>>>>>>>
>>>>>>>>>> If I am correct, then either drivers/mfd/ab8500-core.c or
>>>>>>>>>> ste-ab8500.dtsi and ste-ab8505.dtsi need to be fixed.
>>>>>>>>>
>>>>>>>>> Your analysis is correct.
>>>>>>>>
>>>>>>>> OK, if I'm not overlooking anything, that is good news.
>>>>>>>>
>>>>>>>> Existing .dts source files only have one "ab8500-pwm" child. They
>>>>>>>> already
>>>>>>>> work correcly.
>>>>>>>>
>>>>>>>> Create a new compatible for the case of multiple children. In my
>>>>>>>> example
>>>>>>>> I will add "-mc" (multiple children) to the existing compatible. There
>>>>>>>> is likely a better name, but this lets me provide an example.
>>>>>>>>
>>>>>>>> Modify drivers/mfd/ab8500-core.c to use the new compatible, and new
>>>>>>>> .dts
>>>>>>>> source files with multiple children use the new compatible:
>>>>>>>>
>>>>>>>> OF_MFD_CELL("ab8500-pwm",
>>>>>>>> NULL, NULL, 0, 0, "stericsson,ab8500-pwm"),
>>>>>>>>
>>>>>>>> OF_MFD_CELL_REG("ab8500-pwm-mc",
>>>>>>>> NULL, NULL, 0, 0, "stericsson,ab8500-pwm", 0),
>>>>>>>> OF_MFD_CELL_REG("ab8500-pwm-mc",
>>>>>>>> NULL, NULL, 0, 1, "stericsson,ab8500-pwm", 1),
>>>>>>>> OF_MFD_CELL_REG("ab8500-pwm-mc",
>>>>>>>> NULL, NULL, 0, 2, "stericsson,ab8500-pwm", 2),
>>>>>>>>
>>>>>>>> The "OF_MFD_CELL" entry is the existing entry, which will handle
>>>>>>>> current
>>>>>>>> .dts source files. The new "OF_MFD_CELL_REG" entries will handle new
>>>>>>>> .dts source files.
>>>>>>>
>>>>>>> Sorry, but I'm not sure what the above exercise is supposed to solve.
>>>>>>>
>>>>>>> Could you explain it for me please?
>>>>>>
>>>>>> The OF_MFD_CELL() entry handles all of the existing .dts source files
>>>>>> that only have one ab8500-pwm child nodes. So existing .dtb blobs
>>>>>> continue to work.
>>>>>>
>>>>>> The OF_MFD_CELL_REG() entries will handle all of the new .dts source
>>>>>> files that will have up to 3 ab8500-pwm child nodes.
>>>>>>
>>>>>> Compatibility is maintained for existing .dtb files. A new kernel
>>>>>> version with the changes will support new .dtb files that contain
>>>>>> multiple ab8500-pwm child nodes.
>>>>>
>>>>> I can see *what* you're trying to do. I was looking for an
>>>>> explanation of *how* you think that will work. FWIW, I don't think
>>>>> what you're proposing will work as you envisage. I thought that
>>>>> perhaps I was missing something, which is why I requested further
>>>>> explanation.
>>>>>
>>>>>>>> And of course the patch that creates OF_MFD_CELL_REG() needs to precede
>>>>>>>> this change.
>>>>>>>>
>>>>>>>> I would remove the fallback code in the existing patch that tries to
>>>>>>>> handle an incorrect binding. Just error out if the binding is not
>>>>>>>> used properly.
>>>>>>>
>>>>>>> What fallback code?
>>>>>>
>>>>>> Based on reading the patch description, I expected some extra code to try
>>>>>> to handle the case where the compatible in more than one struct mfd_cell
>>>>>> entry is "stericsson,ab8500-pwm" and there are multiple ab8500-pwm child
>>>>>> nodes.
>>>>>>
>>>>>> Looking at the actual code (which I had not done before), I see that the
>>>>>> "best effort attempt to match" is keeping a list of child nodes that
>>>>>> have already been used (mfd_of_node_list) and avoiding re-use of such
>>>>>> nodes. This allows an invalid .dtb (one with multple
>>>>>> "stericsson,ab8500-pwm"
>>>>>> child nodes) to possibly be assigned unique child nodes for multiple
>>>>>> struct mfd_cell entries to be "stericsson,ab8500-pwm".
>>>>>>
>>>>>> So it is confusing for me to call that "fallback code". It really is
>>>>>> "best effort attempt to match" for a broken .dtb code.
>>>>>>
>>>>>> There should be no best effort for a broken .dtb. The broken .dtb should
>>>>>> instead result in an error.
>>>>>
>>>>> The problem is, how can you tell the difference between a valid and a
>>>>> broken FDT without pre-processing - which, as I explained in the
>>>>> commit message, I am not prepared to do. We cannot test individually
>>>>> since all configurations (e.g. no 'reg' property are valid on an
>>>>> individual basis.
>>>>
>>>> If my proposed changes are made, then there are at least 3 ways to detect
>>>> a broken FDT or prevent the problem caused by the broken FDT.
>>>>
>>>>
>>>> 1) Use the validation process that uses the bindings to validate the
>>>> devicetree source.
>>>
>>> Could you provide an example please?
>>
>> I'm sorry I don't have a concise description and example. I have not been
>> keeping up with the state of the art in this area.
>>
>> A terribly non-precise pointer to the general area is:
>>
>> https://elinux.org/Device_tree_future#Devicetree_Verification
>>
>> As a general comment, I think that validation / verification is a very
>> valuable tool, but the schemas to support it are an ongoing project.
>>
>> Even after the schemas are all in place, it will still be possible for
>> bad FDTs to be fed to the kernel, so it is not a total pancea.
>
> Ah, you meant schema. Yes, I know what that is, I just didn't
> connect the two from the description above.
>
>>>> 2) Modify patch 1/3. The small part of the patch to modify is:
>>>>
>>>> +static int mfd_match_of_node_to_dev(struct platform_device *pdev,
>>>> + struct device_node *np,
>>>> + const struct mfd_cell *cell)
>>>> +{
>>>> + struct mfd_of_node_entry *of_entry;
>>>> + const __be32 *reg;
>>>> + u64 of_node_addr;
>>>> +
>>>> + /* Skip devices 'disabled' by Device Tree */
>>>> + if (!of_device_is_available(np))
>>>> + return -ENODEV;
>>>> +
>>>> + /* Skip if OF node has previously been allocated to a device */
>>>> + list_for_each_entry(of_entry, &mfd_of_node_list, list)
>>>>
>>>> Change:
>>>>
>>>> + if (of_entry->np == np)
>>>> + return -EAGAIN;
>>>>
>>>> To:
>>>>
>>>> + if (of_entry->np == np) {
>>>> + if (!cell->use_of_reg)
>>>> + return -EINVAL;
>>>> + else
>>>> + return -EAGAIN;
>>>>
>>>> There may be a better choice than EINVAL, but I am just showing the method.
>>>>
>>>> You may also want to refactor this section of the patch slightly
>>>> differently to achieve the same result. It was just easiest to
>>>> show the suggested change the way I did it.
>>>>
>>>> The test that returns EINVAL detects the issue that the FDT does
>>>> not match the binding (there is more one child node with the
>>>> "stericsson,ab8500-pwm" compatible.
>>>
>>> So here, instead of just failing a single device, we fail everything?
>>> Sounds a lot like throwing the baby out with the bath water. How is
>>> that an improvement?
>
> [0]
Is "[0]" the patch series, especially patch 1/3?
>
>>>> 3) I'm not sure if the pre-parsing that is wanted is parsing of the
>>>> devicetree or parsing of the struct mfd_cell array. If the mfd_cell
>>>> array then solution 3 is not acceptable.
>>>>
>>>> A different change to a small part of patch 1/3. In mfd_add_devices(),
>>>> validate parameter "cells". The validation could precede the existing
>>>> code, or it could be folded into the existing for loop. The validation
>>>> is checking for any other element of the cells array containing
>>>> the same compatible value if cell->use_of_reg is not true for an element.
>>>>
>>>> If this validation occurs, then I think mfd_of_node_list, and all the
>>>> associated code to deal with it is no longer needed. But I didn't
>>>> look at this part in detail, so maybe I missed something.
>>>>
>>>> The validation is something like (untested):
>>>>
>>>> if (IS_ENABLED(CONFIG_OF)
>>>> for (i = 0; i < n_devs; i++) {
>>>> this_cell = cells + i;
>>>> if (!this_cell->use_of_reg) {
>>>> for (j = 1; j < n_devs; j++) {
>>>> if (j != i) {
>>>> cell = cells + j;
>>>> if
>>>> (!strcmp(this_cell->of_compatible, cell->of_compatible))
>>>> return -EINVAL;
>>>> }
>>>> }
>>>> }
>>>> }
>>>
>>> I think I just threw-up a little. ;)
>>
>> I'm not surprised.
>>
>> But it actually is pretty simple code.
>>
>>>
>>> Did you read the commit message?
>>
>> Yes, I did.
>>
>>>
>>> "We could code around this with some pre-parsing semantics, but the
>>
>> And as I said above, it was not clear to me what was meant by pre-parsing.
>>
>>> added complexity required to cover each and every corner-case is not
>>> justified. Merely patching the current failing (via this patch) is
>>> already working with some pretty small corner-cases"
>>>
>>> Providing thorough pre-parsing would be highly complex and highly
>>> error prone. The example you provide above is not only ugly, there
>>> are numerous issues with it. Not least:
>>>
>>> * Only one corner-case is covered
>>
>> I agree with this. I also agree it is a fool's errand to try to add
>> code to fully validate all possible devicetree source errors in
>> driver source.
>
> Great. Phew!
>
>>> * Validation is only completed on a single mfd_cells struct
>>
>> On a single _array_ of struct mfd_cells. But this does appear
>> to be a fatal flaw. I had not looked at enough callers of
>> mfd_add_devices() to see that it is a common pattern for
>> a single driver to call it multiple times.
>
> Exactly.
>
>>> * False positives can occur and will fail as a result
>>
>> ((What is an example of a false positive?)) Never mind, now that
>> I see that the previous issue is a fatal flaw, this becomes
>> academic.
>
> That's okay, I don't mind discussing.
>
> Ironically, the 'ab8500-pwm' is a good example of a false positive,
> since it's fine for the DT nodes to be identical. So long as there
> are nodes present for each instance, it doesn't matter which one is
> allocated to which device .Forcing a 'reg' property onto them for no> good
> reason it not a valid solution here.
I thought that one of the points of this patch series was to add a
"reg" property to any mfd child that was described by the
OF_MFD_CELL_REG() macro.
And that was meant to fix the problem where multiple indistinguishable
children existed. The only instance I found of that (using the
weak search on OF_MFD_CELL()) was of compatible "stericsson,ab8500-pwm"
in drivers/mfd/ab8500-core.c. You agreed with my email that
reported that.
So I thought that drivers/mfd/ab8500-core.c would be modified to
replace the multiple instances of compatible "stericsson,ab8500-pwm"
in OF_MFD_CELL() with OF_MFD_CELL_REG().
This is another problem with the patch series: there is no user
of OF_MFD_CELL_REG(). Please add one to the series.
>
>>> The above actually makes the solution worse, not better.
>>>
>>
>> Patch 1/3 silently fails to deal with a broken devicetree.
>> It results on one of the three ab8500-pwm child nodes in
>> the hypothetical devicetree source tree not being added.
>>
>> That is not a good result either.
>
> No it doesn't. In the case of 'ab8500-pwm' the OF node is not set for
> 2 of the devices and warnings are presented in the kernel log.
OK, I was wrong about "silent". There is a warning:
pr_warn("%s: Failed to locate of_node [id: %d]\n",
> The
> device will continue to probe and function as usual.
If the device probes and functions as usual without the child of_node,
then why does the node have any properties (for the cases of
arch/arm/boot/dts/ste-ab8500.dtsi and arch/arm/boot/dts/ste-ab8505.dtsi
the properties "clocks" and "clock-names").
Digging through that leads to yet another related question, or actually
sort of the same question. Why do the child nodes with compatible
"stericsson,ab8500-pwm" have the properties "clocks" and "clock-names"
since the binding Documentation/devicetree/bindings/mfd/ab8500.txt
does not list them?
>
>> OK, so my solution #3 is a no go. How about my solution #2,
>> which you did not comment on?
>
> I did [0]. You must have missed it. :)
But yes or no to my solution #2 (with some slight changes to
make it better (more gracious handling of the detected error) as
discussed elsewhere in the email thread)?
>
> It also suffers with false positives.
>
