On 04-06-20, 09:36, Sugar Zhang wrote:
> According to the datasheet of pl330:
>
> Example 2-1 Using DMAGO with the debug instruction registers
>
> 1. Create a program for the DMA channel
> 2. Store the program in a region of system memory
> 3. Poll the DBGSTATUS Register to ensure that the debug is idle
> 4. Write to the DBGINST0 Register
> 5. Write to the DBGINST1 Register
> 6. Write zero to the DBGCMD Register
>
> so, we should make sure the debug is idle before step 4/5/6, not
> only step 6. if not, there maybe a risk that fail to write DBGINST0/1.
Applied, thanks
>
> Signed-off-by: Sugar Zhang <sugar.zh...@rock-chips.com>
> ---
>
> drivers/dma/pl330.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
> index 88b884c..6a158ee 100644
> --- a/drivers/dma/pl330.c
> +++ b/drivers/dma/pl330.c
> @@ -885,6 +885,12 @@ static inline void _execute_DBGINSN(struct pl330_thread
> *thrd,
> void __iomem *regs = thrd->dmac->base;
> u32 val;
>
> + /* If timed out due to halted state-machine */
> + if (_until_dmac_idle(thrd)) {
> + dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n");
> + return;
> + }
> +
> val = (insn[0] << 16) | (insn[1] << 24);
> if (!as_manager) {
> val |= (1 << 0);
> @@ -895,12 +901,6 @@ static inline void _execute_DBGINSN(struct pl330_thread
> *thrd,
> val = le32_to_cpu(*((__le32 *)&insn[2]));
> writel(val, regs + DBGINST1);
>
> - /* If timed out due to halted state-machine */
> - if (_until_dmac_idle(thrd)) {
> - dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n");
> - return;
> - }
> -
> /* Get going */
> writel(0, regs + DBGCMD);
> }
> --
> 2.7.4
>
>
--
~Vinod
