Separate out Rev.2.0 specific hardware changes into
hihope-common-rev2.dtsi file so that hihope-common.dtsi can be used
by all the variants for RZ/G2M[N] boards.

LED node names have been updated according to Rev.4.0 schematics.

Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Marian-Cristian Rotariu <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
---
 .../arm64/boot/dts/renesas/hihope-common.dtsi | 71 +--------------
 arch/arm64/boot/dts/renesas/hihope-rev2.dtsi  | 86 +++++++++++++++++++
 .../renesas/r8a774a1-hihope-rzg2m-rev2.dts    |  2 +-
 .../renesas/r8a774b1-hihope-rzg2n-rev2.dts    |  2 +-
 4 files changed, 92 insertions(+), 69 deletions(-)
 create mode 100644 arch/arm64/boot/dts/renesas/hihope-rev2.dtsi

diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi 
b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index bd056904e8bd..beddfd7a7584 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the HiHope RZ/G2[MN] main board common parts
+ * Device Tree Source for the HiHope RZ/G2[MN] main board
+ * Rev.[2.0/3.0/4.0] common parts
  *
  * Copyright (C) 2019 Renesas Electronics Corp.
  */
@@ -32,17 +33,6 @@
        leds {
                compatible = "gpio-leds";
 
-               bt_active_led {
-                       label = "blue:bt";
-                       gpios = <&gpio7  0 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "hci0-power";
-                       default-state = "off";
-               };
-
-               led0 {
-                       gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
-               };
-
                led1 {
                        gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
                };
@@ -55,11 +45,8 @@
                        gpios = <&gpio0  0 GPIO_ACTIVE_HIGH>;
                };
 
-               wlan_active_led {
-                       label = "yellow:wlan";
-                       gpios = <&gpio7  1 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "phy0tx";
-                       default-state = "off";
+               led4 {
+                       gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
                };
        };
 
@@ -112,17 +99,6 @@
                states = <3300000 1>, <1800000 0>;
        };
 
-       wlan_en_reg: regulator-wlan_en {
-               compatible = "regulator-fixed";
-               regulator-name = "wlan-en-regulator";
-               regulator-min-microvolt = <1800000>;
-               regulator-max-microvolt = <1800000>;
-               startup-delay-us = <70000>;
-
-               gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-
        x302_clk: x302-clock {
                compatible = "fixed-clock";
                #clock-cells = <0>;
@@ -194,11 +170,6 @@
 
        uart-has-rtscts;
        status = "okay";
-
-       bluetooth {
-               compatible = "ti,wl1837-st";
-               enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>;
-       };
 };
 
 &hsusb {
@@ -210,13 +181,6 @@
        clock-frequency = <400000>;
        status = "okay";
 
-       gpio_expander: gpio@20 {
-               compatible = "onnn,pca9654";
-               reg = <0x20>;
-               gpio-controller;
-               #gpio-cells = <2>;
-       };
-
        versaclock5: clock-generator@6a {
                compatible = "idt,5p49v5923";
                reg = <0x6a>;
@@ -281,11 +245,6 @@
                power-source = <1800>;
        };
 
-       sound_clk_pins: sound_clk {
-               groups = "audio_clk_a_a";
-               function = "audio_clk";
-       };
-
        usb0_pins: usb0 {
                groups = "usb0";
                function = "usb0";
@@ -309,28 +268,6 @@
        };
 };
 
-&rcar_sound {
-       pinctrl-0 = <&sound_clk_pins>;
-       pinctrl-names = "default";
-
-       status = "okay";
-
-       /* Single DAI */
-       #sound-dai-cells = <0>;
-
-       rsnd_port: port {
-               rsnd_endpoint: endpoint {
-                       remote-endpoint = <&dw_hdmi0_snd_in>;
-
-                       dai-format = "i2s";
-                       bitclock-master = <&rsnd_endpoint>;
-                       frame-master = <&rsnd_endpoint>;
-
-                       playback = <&ssi2>;
-               };
-       };
-};
-
 &rwdt {
        timeout-sec = <60>;
        status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi 
b/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi
new file mode 100644
index 000000000000..8e2db1d6ca81
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2[MN] main board Rev.2.0 common
+ * parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hihope-common.dtsi"
+
+/ {
+       leds {
+               compatible = "gpio-leds";
+
+               bt_active_led {
+                       label = "blue:bt";
+                       gpios = <&gpio7  0 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "hci0-power";
+                       default-state = "off";
+               };
+
+               wlan_active_led {
+                       label = "yellow:wlan";
+                       gpios = <&gpio7  1 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "phy0tx";
+                       default-state = "off";
+               };
+       };
+
+       wlan_en_reg: regulator-wlan_en {
+               compatible = "regulator-fixed";
+               regulator-name = "wlan-en-regulator";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               startup-delay-us = <70000>;
+
+               gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&hscif0 {
+       bluetooth {
+               compatible = "ti,wl1837-st";
+               enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&i2c4 {
+       gpio_expander: gpio@20 {
+               compatible = "onnn,pca9654";
+               reg = <0x20>;
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
+};
+
+&pfc {
+       sound_clk_pins: sound_clk {
+               groups = "audio_clk_a_a";
+               function = "audio_clk";
+       };
+};
+
+&rcar_sound {
+       pinctrl-0 = <&sound_clk_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+
+       /* Single DAI */
+       #sound-dai-cells = <0>;
+
+       rsnd_port: port {
+               rsnd_endpoint: endpoint {
+                       remote-endpoint = <&dw_hdmi0_snd_in>;
+
+                       dai-format = "i2s";
+                       bitclock-master = <&rsnd_endpoint>;
+                       frame-master = <&rsnd_endpoint>;
+
+                       playback = <&ssi2>;
+               };
+       };
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts 
b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts
index 276f449ad14e..bb18f6ee2048 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts
@@ -7,7 +7,7 @@
 
 /dts-v1/;
 #include "r8a774a1.dtsi"
-#include "hihope-common.dtsi"
+#include "hihope-rev2.dtsi"
 
 / {
        model = "HopeRun HiHope RZ/G2M main board (Rev.2.0) based on r8a774a1";
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts 
b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts
index eb1206b2d97a..c69ca5cf6f77 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts
@@ -7,7 +7,7 @@
 
 /dts-v1/;
 #include "r8a774b1.dtsi"
-#include "hihope-common.dtsi"
+#include "hihope-rev2.dtsi"
 
 / {
        model = "HopeRun HiHope RZ/G2N main board (Rev.2.0) based on r8a774b1";
-- 
2.17.1

Reply via email to