This is v7 of a driver for the Corsair Commander Pro.
It provides sysfs attributes for:
- Reading fan speed
- Reading temp sensors
- Reading voltage values
- Writing pwm and reading last written pwm
- Reading fan and temp connection status
It is an usb driver, so it needs to be ignored by usbhid.
The Corsair Commander Pro is a fan controller and provides
no means for user interaction.
The two device numbers are there, because there is a slightly
different version of the same device. (Only difference
seem to be in some presets.)
This is based on the staging/hwmon tree.
Signed-off-by: Marius Zachmann <m...@mariuszachmann.de>
---
Changes from v6
- used break after connection checks in ccp_is_visible
Changes from v5
- added bitmaps for temp_cnct and fan_cnct
- ccp_visible returns 0 when there is no connection
and removed tests for connection in other functions
- removed temp labels
- add define for fan and temp sensor count
- removed unneccesary mutex from get_temp_cnct and get_fan_cnct
and moved these functions directly above ccp_probe
- no more setting return values in ccp_read, ccp_read_string, ccp_write
just return directly instead of break
- get_data returns values (always >= 0) directly
- inlined get_temp
- removed first two error messages in send_usb_cmd and
changed last one to dev_dbg
- comment alignments and clarifications
- renamed goto label to "out_unlock"
Changes from v4
- squashed 3 commits into one.
Changes from v3
- add device ids to hid_ignore_list in hid-quirks.h
- removed unused update_interval
- ccp_disconnect is static
---
Documentation/hwmon/corsair-cpro.rst | 39 +++
Documentation/hwmon/index.rst | 1 +
MAINTAINERS | 6 +
drivers/hid/hid-quirks.c | 2 +
drivers/hwmon/Kconfig | 10 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/corsair-cpro.c | 456 +++++++++++++++++++++++++++
7 files changed, 515 insertions(+)
create mode 100644 Documentation/hwmon/corsair-cpro.rst
create mode 100644 drivers/hwmon/corsair-cpro.c
diff --git a/Documentation/hwmon/corsair-cpro.rst
b/Documentation/hwmon/corsair-cpro.rst
new file mode 100644
index 000000000000..5913e23d764c
--- /dev/null
+++ b/Documentation/hwmon/corsair-cpro.rst
@@ -0,0 +1,39 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver corsair-cpro
+==========================
+
+Supported devices:
+
+ * Corsair Commander Pro
+ * Corsair Commander Pro (1000D)
+
+Author: Marius Zachmann
+
+Description
+-----------
+
+This driver implements the sysfs interface for the Corsair Commander Pro.
+The Corsair Commander Pro is a USB device with 6 fan connectors,
+4 temperature sensor connectors and 2 Corsair LED connectors.
+It can read the voltage levels on the SATA power connector.
+
+Usage Notes
+-----------
+
+Since it is a USB device, hotswapping is possible. The device is autodetected.
+
+Sysfs entries
+-------------
+
+=======================
=====================================================================
+in0_input Voltage on SATA 12v
+in1_input Voltage on SATA 5v
+in2_input Voltage on SATA 3.3v
+temp[1-4]_input Temperature on connected temperature sensors
+fan[1-6]_input Connected fan rpm.
+fan[1-6]_label Shows fan type as detected by the device.
+pwm[1-6] Sets the fan speed. Values from 0-255.
+ When reading, it reports the last value if it was set
by the driver.
+ Otherwise returns 0.
+=======================
=====================================================================
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 55ff4b7c5349..750d3a975d82 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -47,6 +47,7 @@ Hardware Monitoring Kernel Drivers
bel-pfe
bt1-pvt
coretemp
+ corsair-cpro
da9052
da9055
dell-smm-hwmon
diff --git a/MAINTAINERS b/MAINTAINERS
index 68f21d46614c..47b0361718f4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4400,6 +4400,12 @@ S: Maintained
F: Documentation/hwmon/coretemp.rst
F: drivers/hwmon/coretemp.c
+CORSAIR-CPRO HARDWARE MONITOR DRIVER
+M: Marius <m...@mariuszachmann.de>
+L: linux-hw...@vger.kernel.org
+S: Maintained
+F: drivers/hwmon/corsair-cpro.c
+
COSA/SRP SYNC SERIAL DRIVER
M: Jan "Yenya" Kasprzak <k...@fi.muni.cz>
S: Maintained
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index ca8b5c261c7c..7b7bc7737c53 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -699,6 +699,8 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_AXENTIA, USB_DEVICE_ID_AXENTIA_FM_RADIO)
},
{ HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD)
},
{ HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, 0x0c10) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, 0x1d00) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL,
USB_DEVICE_ID_CYGNAL_RADIO_SI470X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL,
USB_DEVICE_ID_CYGNAL_RADIO_SI4713) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CMEDIA, USB_DEVICE_ID_CM109) },
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 288ae9f63588..8b046a5dfa40 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -439,6 +439,16 @@ config SENSORS_BT1_PVT_ALARMS
the data conversion will be periodically performed and the data will
be
saved in the internal driver cache.
+config SENSORS_CORSAIR_CPRO
+ tristate "Corsair Commander Pro controller"
+ depends on USB
+ help
+ If you say yes here you get support for the Corsair Commander Pro
+ controller.
+
+ This driver can also be built as a module. If so, the module
+ will be called corsair-cpro.
+
config SENSORS_DRIVETEMP
tristate "Hard disk drives with temperature sensors"
depends on SCSI && ATA
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 3e32c21f5efe..18e1ef74ade7 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_AXI_FAN_CONTROL) += axi-fan-control.o
obj-$(CONFIG_SENSORS_BT1_PVT) += bt1-pvt.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
+obj-$(CONFIG_SENSORS_CORSAIR_CPRO) += corsair-cpro.o
obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o
obj-$(CONFIG_SENSORS_DELL_SMM) += dell-smm-hwmon.o
diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c
new file mode 100644
index 000000000000..a22583acc229
--- /dev/null
+++ b/drivers/hwmon/corsair-cpro.c
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * corsair-cpro.c - Linux driver for Corsair Commander Pro
+ * Copyright (C) 2020 Marius Zachmann <m...@mariuszachmann.de>
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/hwmon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/usb.h>
+
+#define USB_VENDOR_ID_CORSAIR 0x1b1c
+#define USB_PRODUCT_ID_CORSAIR_COMMANDERPRO 0x0c10
+#define USB_PRODUCT_ID_CORSAIR_1000D 0x1d00
+
+#define OUT_BUFFER_SIZE 63
+#define IN_BUFFER_SIZE 16
+#define LABEL_LENGTH 11
+
+#define CTL_GET_TMP_CNCT 0x10 /*
+ * returns in bytes 1-4 for each temp
sensor:
+ * 0 not connected
+ * 1 connected
+ */
+#define CTL_GET_TMP 0x11 /*
+ * send: byte 1 is channel, rest zero
+ * rcv: returns temp for channel in
centi-degree celsius
+ * in bytes 1 and 2
+ * returns 17 in byte 0 if no sensor is
connected
+ */
+#define CTL_GET_VOLT 0x12 /*
+ * send: byte 1 is rail number: 0 =
12v, 1 = 5v, 2 = 3.3v
+ * rcv: returns millivolt in bytes 1,2
+ */
+#define CTL_GET_FAN_CNCT 0x20 /*
+ * returns in bytes 1-6 for each fan:
+ * 0 not connected
+ * 1 3pin
+ * 2 4pin
+ */
+#define CTL_GET_FAN_RPM 0x21 /*
+ * send: byte 1 is channel, rest zero
+ * rcv: returns rpm in bytes 1,2
+ */
+#define CTL_SET_FAN_FPWM 0x23 /*
+ * set fixed pwm
+ * send: byte 1 is fan number
+ * send: byte 2 is percentage from 0 -
100
+ */
+
+#define NUM_FANS 6
+#define NUM_TEMP_SENSORS 4
+
+struct ccp_device {
+ struct usb_device *udev;
+ struct mutex mutex; /* whenever buffer is used, lock before
send_usb_cmd */
+ u8 *buffer;
+ int pwm[6];
+ DECLARE_BITMAP(temp_cnct, NUM_TEMP_SENSORS);
+ DECLARE_BITMAP(fan_cnct, NUM_FANS);
+ char fan_label[6][LABEL_LENGTH];
+};
+
+/* send command, check for error in response, response in ccp->buffer */
+static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2)
+{
+ int actual_length;
+ int ret;
+
+ memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE);
+ ccp->buffer[0] = command;
+ ccp->buffer[1] = byte1;
+ ccp->buffer[2] = byte2;
+
+ ret = usb_bulk_msg(ccp->udev, usb_sndintpipe(ccp->udev, 2),
ccp->buffer, OUT_BUFFER_SIZE,
+ &actual_length, 1000);
+ if (ret)
+ return ret;
+
+ /* response needs to be received every time */
+ ret = usb_bulk_msg(ccp->udev, usb_rcvintpipe(ccp->udev, 1),
ccp->buffer, IN_BUFFER_SIZE,
+ &actual_length, 1000);
+ if (ret)
+ return ret;
+
+ /* first byte of response is error code */
+ if (ccp->buffer[0] != 0x00) {
+ dev_dbg(&ccp->udev->dev, "device response error: %d",
ccp->buffer[0]);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/* requests and returns single data values depending on channel */
+static int get_data(struct ccp_device *ccp, int command, int channel)
+{
+ int ret;
+
+ mutex_lock(&ccp->mutex);
+
+ ret = send_usb_cmd(ccp, command, channel, 0);
+ if (ret)
+ goto out_unlock;
+
+ ret = (ccp->buffer[1] << 8) + ccp->buffer[2];
+
+out_unlock:
+ mutex_unlock(&ccp->mutex);
+ return ret;
+}
+
+static int set_pwm(struct ccp_device *ccp, int channel, long val)
+{
+ int ret;
+
+ if (val < 0 || val > 255)
+ return -EINVAL;
+
+ ccp->pwm[channel] = val;
+
+ /* The Corsair Commander Pro uses values from 0-100 */
+ val = DIV_ROUND_CLOSEST(val * 100, 255);
+
+ mutex_lock(&ccp->mutex);
+
+ ret = send_usb_cmd(ccp, CTL_SET_FAN_FPWM, channel, val);
+
+ mutex_unlock(&ccp->mutex);
+ return ret;
+}
+
+static int ccp_read_string(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ struct ccp_device *ccp = dev_get_drvdata(dev);
+
+ switch (type) {
+ case hwmon_fan:
+ switch (attr) {
+ case hwmon_fan_label:
+ *str = ccp->fan_label[channel];
+ return 0;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int ccp_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct ccp_device *ccp = dev_get_drvdata(dev);
+ int ret;
+
+ switch (type) {
+ case hwmon_temp:
+ switch (attr) {
+ case hwmon_temp_input:
+ ret = get_data(ccp, CTL_GET_TMP, channel);
+ if (ret < 0)
+ return ret;
+ *val = ret * 10;
+ return 0;
+ default:
+ break;
+ }
+ break;
+ case hwmon_fan:
+ switch (attr) {
+ case hwmon_fan_input:
+ ret = get_data(ccp, CTL_GET_FAN_RPM, channel);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return 0;
+ default:
+ break;
+ }
+ break;
+ case hwmon_pwm:
+ switch (attr) {
+ case hwmon_pwm_input:
+ /* how to read pwm values from the device is currently
unknown */
+ /* driver returns last set value or 0
*/
+ *val = ccp->pwm[channel];
+ return 0;
+ default:
+ break;
+ }
+ break;
+ case hwmon_in:
+ switch (attr) {
+ case hwmon_in_input:
+ ret = get_data(ccp, CTL_GET_VOLT, channel);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return 0;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+};
+
+static int ccp_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ struct ccp_device *ccp = dev_get_drvdata(dev);
+
+ switch (type) {
+ case hwmon_pwm:
+ switch (attr) {
+ case hwmon_pwm_input:
+ return set_pwm(ccp, channel, val);
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+};
+
+static umode_t ccp_is_visible(const void *data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct ccp_device *ccp = data;
+
+ switch (type) {
+ case hwmon_temp:
+ if (!test_bit(channel, ccp->temp_cnct))
+ break;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ return 0444;
+ case hwmon_temp_label:
+ return 0444;
+ default:
+ break;
+ }
+ break;
+ case hwmon_fan:
+ if (!test_bit(channel, ccp->fan_cnct))
+ break;
+
+ switch (attr) {
+ case hwmon_fan_input:
+ return 0444;
+ case hwmon_fan_label:
+ return 0444;
+ default:
+ break;
+ }
+ break;
+ case hwmon_pwm:
+ if (!test_bit(channel, ccp->fan_cnct))
+ break;
+
+ switch (attr) {
+ case hwmon_pwm_input:
+ return 0644;
+ default:
+ break;
+ }
+ break;
+ case hwmon_in:
+ switch (attr) {
+ case hwmon_in_input:
+ return 0444;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+};
+
+static const struct hwmon_ops ccp_hwmon_ops = {
+ .is_visible = ccp_is_visible,
+ .read = ccp_read,
+ .read_string = ccp_read_string,
+ .write = ccp_write,
+};
+
+static const struct hwmon_channel_info *ccp_info[] = {
+ HWMON_CHANNEL_INFO(chip,
+ HWMON_C_REGISTER_TZ),
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT,
+ HWMON_T_INPUT,
+ HWMON_T_INPUT,
+ HWMON_T_INPUT
+ ),
+ HWMON_CHANNEL_INFO(fan,
+ HWMON_F_INPUT | HWMON_F_LABEL,
+ HWMON_F_INPUT | HWMON_F_LABEL,
+ HWMON_F_INPUT | HWMON_F_LABEL,
+ HWMON_F_INPUT | HWMON_F_LABEL,
+ HWMON_F_INPUT | HWMON_F_LABEL,
+ HWMON_F_INPUT | HWMON_F_LABEL
+ ),
+ HWMON_CHANNEL_INFO(pwm,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT
+ ),
+ HWMON_CHANNEL_INFO(in,
+ HWMON_I_INPUT,
+ HWMON_I_INPUT,
+ HWMON_I_INPUT
+ ),
+ NULL
+};
+
+static const struct hwmon_chip_info ccp_chip_info = {
+ .ops = &ccp_hwmon_ops,
+ .info = ccp_info,
+};
+
+/* read fan connection status and set labels */
+static int get_fan_cnct(struct ccp_device *ccp)
+{
+ int channel;
+ int mode;
+ int ret;
+
+ ret = send_usb_cmd(ccp, CTL_GET_FAN_CNCT, 0, 0);
+ if (ret)
+ return ret;
+
+ for (channel = 0; channel < NUM_FANS; channel++) {
+ mode = ccp->buffer[channel + 1];
+ if (mode == 0)
+ continue;
+
+ set_bit(channel, ccp->fan_cnct);
+
+ switch (mode) {
+ case 1:
+ scnprintf(ccp->fan_label[channel], LABEL_LENGTH,
+ "fan%d 3pin", channel + 1);
+ break;
+ case 2:
+ scnprintf(ccp->fan_label[channel], LABEL_LENGTH,
+ "fan%d 4pin", channel + 1);
+ break;
+ default:
+ scnprintf(ccp->fan_label[channel], LABEL_LENGTH,
+ "fan%d other", channel + 1);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/* read temp sensor connection status */
+static int get_temp_cnct(struct ccp_device *ccp)
+{
+ int channel;
+ int mode;
+ int ret;
+
+ ret = send_usb_cmd(ccp, CTL_GET_TMP_CNCT, 0, 0);
+ if (ret)
+ return ret;
+
+ for (channel = 0; channel < NUM_TEMP_SENSORS; channel++) {
+ mode = ccp->buffer[channel + 1];
+ if (mode == 0)
+ continue;
+
+ set_bit(channel, ccp->temp_cnct);
+ }
+
+ return 0;
+}
+
+static int ccp_probe(struct usb_interface *intf, const struct usb_device_id
*id)
+{
+ struct device *hwmon_dev;
+ struct ccp_device *ccp;
+ int ret;
+
+ ccp = devm_kzalloc(&intf->dev, sizeof(*ccp), GFP_KERNEL);
+ if (!ccp)
+ return -ENOMEM;
+
+ ccp->buffer = devm_kmalloc(&intf->dev, OUT_BUFFER_SIZE, GFP_KERNEL);
+ if (!ccp->buffer)
+ return -ENOMEM;
+
+ mutex_init(&ccp->mutex);
+
+ ccp->udev = interface_to_usbdev(intf);
+
+ /* temp and fan connection status only updates when device is powered
on */
+ ret = get_temp_cnct(ccp);
+ if (ret)
+ return ret;
+
+ ret = get_fan_cnct(ccp);
+ if (ret)
+ return ret;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(&intf->dev,
"corsaircpro", ccp,
+ &ccp_chip_info, 0);
+
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static void ccp_disconnect(struct usb_interface *intf)
+{
+}
+
+static const struct usb_device_id ccp_devices[] = {
+ { USB_DEVICE(USB_VENDOR_ID_CORSAIR,
USB_PRODUCT_ID_CORSAIR_COMMANDERPRO) },
+ { USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_1000D) },
+ { }
+};
+
+static struct usb_driver ccp_driver = {
+ .name = "corsair-cpro",
+ .probe = ccp_probe,
+ .disconnect = ccp_disconnect,
+ .id_table = ccp_devices
+};
+
+MODULE_DEVICE_TABLE(usb, ccp_devices);
+MODULE_LICENSE("GPL");
+
+module_usb_driver(ccp_driver);
--
2.27.0
