On Mon, Jun 29, 2020 at 12:43 PM Mathieu Desnoyers <mathieu.desnoy...@efficios.com> wrote: > > ----- On May 13, 2020, at 3:56 PM, Eric Dumazet eduma...@google.com wrote: > > > On Wed, May 13, 2020 at 12:49 PM Eric Dumazet <eduma...@google.com> wrote: > >> > >> > >> On Wed, May 13, 2020 at 12:38 PM Mathieu Desnoyers > >> <mathieu.desnoy...@efficios.com> wrote: > >> > > >> > Hi, > >> > > >> > I am reporting a regression with respect to use of > >> > TCP_MD5SIG/TCP_MD5SIG_EXT > >> > on established sockets. It is observed by a customer. > >> > > >> > This issue is introduced by this commit: > >> > > >> > commit 721230326891 "tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on > >> > established sockets" > >> > > >> > The intent of this commit appears to be to fix a use of uninitialized > >> > value in > >> > tcp_parse_options(). The change introduced by this commit is to disallow > >> > setting > >> > the TCP_MD5SIG{,_EXT} socket options on an established socket. > >> > > >> > The justification for this change appears in the commit message: > >> > > >> > "I believe this was caused by a TCP_MD5SIG being set on live > >> > flow. > >> > > >> > This is highly unexpected, since TCP option space is limited. > >> > > >> > For instance, presence of TCP MD5 option automatically disables > >> > TCP TimeStamp option at SYN/SYNACK time, which we can not do > >> > once flow has been established. > >> > > >> > Really, adding/deleting an MD5 key only makes sense on sockets > >> > in CLOSE or LISTEN state." > >> > > >> > However, reading through RFC2385 [1], this justification does not appear > >> > correct. Quoting to the RFC: > >> > > >> > "This password never appears in the connection stream, and the actual > >> > form of the password is up to the application. It could even change > >> > during the lifetime of a particular connection so long as this change > >> > was synchronized on both ends" > >> > > >> > The paragraph above clearly underlines that changing the MD5 signature of > >> > a live TCP socket is allowed. > >> > > >> > I also do not understand why it would be invalid to transition an > >> > established > >> > TCP socket from no-MD5 to MD5, or transition from MD5 to no-MD5. Quoting > >> > the > >> > RFC: > >> > > >> > "The total header size is also an issue. The TCP header specifies > >> > where segment data starts with a 4-bit field which gives the total > >> > size of the header (including options) in 32-byte words. This means > >> > that the total size of the header plus option must be less than or > >> > equal to 60 bytes -- this leaves 40 bytes for options." > >> > > >> > The paragraph above seems to be the only indication that some TCP options > >> > cannot be combined on a given TCP socket: if the resulting header size > >> > does > >> > not fit. However, I do not see anything in the specification preventing > >> > any > >> > of the following use-cases on an established TCP socket: > >> > > >> > - Transition from no-MD5 to MD5, > >> > - Transition from MD5 to no-MD5, > >> > - Changing the MD5 key associated with a socket. > >> > > >> > As long as the resulting combination of options does not exceed the > >> > available > >> > header space. > >> > > >> > Can we please fix this KASAN report in a way that does not break > >> > user-space > >> > applications expectations about Linux' implementation of RFC2385 ? > [...] > >> > [1] RFC2385: https://tools.ietf.org/html/rfc2385 > >> > >> > >> I do not think we want to transition sockets in the middle. since > >> packets can be re-ordered in the network. > >> > >> MD5 is about security (and a loose form of it), so better make sure > >> all packets have it from the beginning of the flow. > >> > >> A flow with TCP TS on can not suddenly be sending packets without TCP TS. > >> > >> Clearly, trying to support this operation is a can of worms, I do not > >> want to maintain such atrocity. > >> > >> RFC can state whatever it wants, sometimes reality forces us to have > >> sane operations. > >> > >> Thanks. > >> > > Also the RFC states : > > > > "This password never appears in the connection stream, and the actual > > form of the password is up to the application. It could even change > > during the lifetime of a particular connection so long as this change > > was synchronized on both ends" > > > > It means the key can be changed, but this does not imply the option > > can be turned on/off dynamically. > > > > The change discussed previously (introduced by commit 721230326891 "tcp: > md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets") breaks > user-space ABI. As an example, the following BGP application uses > setsockopt TCP_MD5SIG on a live TCP socket: > > https://github.com/IPInfusion/SDN-IP > > In addition to break user-space, it also breaks network protocol > expectations for network equipment vendors implementing RFC2385. > Considering that the goal of these protocols is interaction between > different network equipment, breaking compatibility on that side > is unexpected as well. Requiring to bring down/up the connection > just to change the TCP MD5 password is a no-go in networks with > high availability requirements. Changing the BGP authentication > password must be allowed without tearing down and re-establishing > the TCP sockets. Otherwise it doesn't scale for large network > operators to have to individually manage each individual TCP socket > in their network. However, based on the feedback I received, it > would be acceptable to tear-down the TCP connections and re-establish > them when enabling or disabling the MD5 option. > > Here is a list of a few network vendors along with their behavior > with respect to TCP MD5: > > - Cisco: Allows for password to be changed, but within the hold-down > timer (~180 seconds). > - Juniper: When password is initially set on active connection it will > reset, but after that any subsequent password changes no network > resets. > - Nokia: No notes on if they flap the tcp connection or not. > - Ericsson/RedBack: Allows for 2 password (old/new) to co-exist until > both sides are ok with new passwords. > - Meta-Switch: Expects the password to be set before a connection is > attempted, but no further info on whether they reset the TCP > connection on a change. > - Avaya: Disable the neighbor, then set password, then re-enable. > - Zebos: Would normally allow the change when socket connected. > >
If you want to be able to _change_ md5 key, this is fine by me, please send a patch. We can not dynamically turn on MD5, this is mentioned briefly in tcp_synack_options(). If you want to turn on MD5 on an established flow, then you must ensure that both SACK and TS were not enabled in the 3WHS, and then make sure nothing blows up in the stack.