On 13-05-20, 20:22, Laurent Pinchart wrote: > Hello, > > The patch series adds a PHY driver for the Xilinx ZynqMP gigabit serial > transceivers (PS-GTR). The PS-GTR is a set of 4 PHYs that can be used by > the PCIe, USB 3.0, DisplayPort, SATA and Ethernet controllers that are > part of the Serial I/O Unit (SIOU). > > The code is based on a previous version sent by Anurag Kumar Vulisha and > available at [1]. The DT bindings have been converted to YAML, and both > the bindings and the driver have been considerably reworked (and > simplified). The most notable changes is the removal of manual handling > of the reset lines of the PHY users (which belongs to the PHY users > themselves), and moving to the standard PHY .power_on() and .configure() > operations to replace functions that were previously exported by the > driver. Please see individual patches for a more detailed changelog. > > Compared to v7, review comments on the PHY driver have been taken into > account, and the DT bindings have switched to the GPL-2.0-only OR > BSD-2-Clause license > > The code is based on v5.6 and has been tested with DisplayPort on the > Xilinx ZC106 board.
This (dt patch and 8.1 update) fails to apply for me, can you please rebased on phy-next and resend. Also I saw this while trying to apply: WARNING: Misordered MAINTAINERS entry - list 'S:' before 'T:' #403: FILE: MAINTAINERS:18605: +T: git https://github.com/Xilinx/linux-xlnx.git +S: Supported Thanks -- ~Vinod
