Halve the time limit used when aggregation is enabled on an RX endpoint, to half a millisecond.
Use DIV_ROUND_CLOSEST() to compute the value that represents the time period, to get better accuracy in the event the time limit is not an even multiple of the granularity. Signed-off-by: Alex Elder <el...@linaro.org> --- drivers/net/ipa/ipa_endpoint.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ipa/ipa_endpoint.c b/drivers/net/ipa/ipa_endpoint.c index 9f50d0d11704..93449366d7d8 100644 --- a/drivers/net/ipa/ipa_endpoint.c +++ b/drivers/net/ipa/ipa_endpoint.c @@ -36,7 +36,7 @@ #define IPA_ENDPOINT_QMAP_METADATA_MASK 0x000000ff /* host byte order */ #define IPA_ENDPOINT_RESET_AGGR_RETRY_MAX 3 -#define IPA_AGGR_TIME_LIMIT_DEFAULT 1000 /* microseconds */ +#define IPA_AGGR_TIME_LIMIT_DEFAULT 500 /* microseconds */ /** enum ipa_status_opcode - status element opcode hardware values */ enum ipa_status_opcode { @@ -583,9 +583,11 @@ static void ipa_endpoint_init_aggr(struct ipa_endpoint *endpoint) val |= u32_encode_bits(IPA_GENERIC, AGGR_TYPE_FMASK); val |= u32_encode_bits(aggr_size, AGGR_BYTE_LIMIT_FMASK); + limit = IPA_AGGR_TIME_LIMIT_DEFAULT; - val |= u32_encode_bits(limit / IPA_AGGR_GRANULARITY, - AGGR_TIME_LIMIT_FMASK); + limit = DIV_ROUND_CLOSEST(limit, IPA_AGGR_GRANULARITY); + val |= u32_encode_bits(limit, AGGR_TIME_LIMIT_FMASK); + val |= u32_encode_bits(0, AGGR_PKT_LIMIT_FMASK); if (endpoint->data->rx.aggr_close_eof) val |= AGGR_SW_EOF_ACTIVE_FMASK; -- 2.25.1