ECSPI issue fixed from i.mx6ul at hardware level, no need
ERR009165 anymore on those chips such as i.mx8mq.
Signed-off-by: Robin Gong <yibin.g...@nxp.com>
Acked-by: Vinod Koul <vk...@kernel.org>
---
drivers/dma/imx-sdma.c | 29 ++++++++++++++++++++++++++++-
1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 337143f..3058c78 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -420,6 +420,13 @@ struct sdma_driver_data {
int num_events;
struct sdma_script_start_addrs *script_addrs;
bool check_ratio;
+ /*
+ * ecspi ERR009165 fixed should be done in sdma script
+ * and it has been fixed in soc from i.mx6ul.
+ * please get more information from the below link:
+ * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+ */
+ bool ecspi_fixed;
};
struct sdma_engine {
@@ -541,6 +548,13 @@ static struct sdma_driver_data sdma_imx6q = {
.script_addrs = &sdma_script_imx6q,
};
+static struct sdma_driver_data sdma_imx6ul = {
+ .chnenbl0 = SDMA_CHNENBL0_IMX35,
+ .num_events = 48,
+ .script_addrs = &sdma_script_imx6q,
+ .ecspi_fixed = true,
+};
+
static struct sdma_script_start_addrs sdma_script_imx7d = {
.ap_2_ap_addr = 644,
.uart_2_mcu_addr = 819,
@@ -589,6 +603,9 @@ static const struct platform_device_id sdma_devtypes[] = {
.name = "imx7d-sdma",
.driver_data = (unsigned long)&sdma_imx7d,
}, {
+ .name = "imx6ul-sdma",
+ .driver_data = (unsigned long)&sdma_imx6ul,
+ }, {
.name = "imx8mq-sdma",
.driver_data = (unsigned long)&sdma_imx8mq,
}, {
@@ -605,6 +622,7 @@ static const struct of_device_id sdma_dt_ids[] = {
{ .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, },
{ .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, },
{ .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, },
+ { .compatible = "fsl,imx6ul-sdma", .data = &sdma_imx6ul, },
{ .compatible = "fsl,imx8mq-sdma", .data = &sdma_imx8mq, },
{ /* sentinel */ }
};
@@ -1174,8 +1192,17 @@ static int sdma_config_channel(struct dma_chan *chan)
if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP ||
sdmac->peripheral_type == IMX_DMATYPE_ASRC)
sdma_set_watermarklevel_for_p2p(sdmac);
- } else
+ } else {
+ /*
+ * ERR009165 fixed from i.mx6ul, no errata need,
+ * set bit31 to let sdma script skip the errata.
+ */
+ if (sdmac->peripheral_type == IMX_DMATYPE_CSPI &&
+ sdmac->direction == DMA_MEM_TO_DEV &&
+ sdmac->sdma->drvdata->ecspi_fixed)
+ __set_bit(31, &sdmac->watermark_level);
__set_bit(sdmac->event_id0, sdmac->event_mask);
+ }
/* Address */
sdmac->shp_addr = sdmac->per_address;
--
2.7.4
