This will allow device trees to make use of these constants. Signed-off-by: Anand K Mistry <[email protected]> ---
drivers/regulator/da9211-regulator.c | 5 +---- .../dt-bindings/regulator/dlg,da9211-regulator.h | 16 ++++++++++++++++ 2 files changed, 17 insertions(+), 4 deletions(-) create mode 100644 include/dt-bindings/regulator/dlg,da9211-regulator.h diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c index 2ea4362ffa5c..1f9b75b41346 100644 --- a/drivers/regulator/da9211-regulator.c +++ b/drivers/regulator/da9211-regulator.c @@ -17,6 +17,7 @@ #include <linux/gpio/consumer.h> #include <linux/regulator/of_regulator.h> #include <linux/regulator/da9211.h> +#include <dt-bindings/regulator/dlg,da9211-regulator.h> #include "da9211-regulator.h" /* DEVICE IDs */ @@ -24,10 +25,6 @@ #define DA9213_DEVICE_ID 0x23 #define DA9215_DEVICE_ID 0x24 -#define DA9211_BUCK_MODE_SLEEP 1 -#define DA9211_BUCK_MODE_SYNC 2 -#define DA9211_BUCK_MODE_AUTO 3 - /* DA9211 REGULATOR IDs */ #define DA9211_ID_BUCKA 0 #define DA9211_ID_BUCKB 1 diff --git a/include/dt-bindings/regulator/dlg,da9211-regulator.h b/include/dt-bindings/regulator/dlg,da9211-regulator.h new file mode 100644 index 000000000000..cdce2d54c8ba --- /dev/null +++ b/include/dt-bindings/regulator/dlg,da9211-regulator.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _DT_BINDINGS_REGULATOR_DLG_DA9211_H +#define _DT_BINDINGS_REGULATOR_DLG_DA9211_H + +/* + * These buck mode constants may be used to specify values in device tree + * properties (e.g. regulator-initial-mode, regulator-allowed-modes). + * A description of the following modes is in the manufacturers datasheet. + */ + +#define DA9211_BUCK_MODE_SLEEP 1 +#define DA9211_BUCK_MODE_SYNC 2 +#define DA9211_BUCK_MODE_AUTO 3 + +#endif -- 2.27.0.212.ge8ba1cc988-goog
