This adds a driver to control the APU present in the MT8183.
This loads the firmware and start the DSP.
Signed-off-by: Alexandre Bailon <abai...@baylibre.com>
---
drivers/remoteproc/Kconfig | 10 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/mtk_apu_rproc.c | 308 +++++++++++++++++++++++++++++
3 files changed, 319 insertions(+)
create mode 100644 drivers/remoteproc/mtk_apu_rproc.c
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index c4d1731295eb..e116d4a12ac3 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -42,6 +42,16 @@ config MTK_SCP
It's safe to say N here.
+config MTK_APU
+ tristate "Mediatek APU remoteproc support"
+ depends on ARCH_MEDIATEK
+ depends on MTK_IOMMU
+ help
+ Say y to support the Mediatek's Accelerated Processing Unit (APU) via
+ the remote processor framework.
+
+ It's safe to say N here.
+
config OMAP_REMOTEPROC
tristate "OMAP remoteproc support"
depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index e8b886e511f0..2ea231b75fa6 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -12,6 +12,7 @@ remoteproc-y +=
remoteproc_elf_loader.o
obj-$(CONFIG_IMX_REMOTEPROC) += imx_rproc.o
obj-$(CONFIG_INGENIC_VPU_RPROC) += ingenic_rproc.o
obj-$(CONFIG_MTK_SCP) += mtk_scp.o mtk_scp_ipi.o
+obj-$(CONFIG_MTK_APU) += mtk_apu_rproc.o
obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o
obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o
diff --git a/drivers/remoteproc/mtk_apu_rproc.c
b/drivers/remoteproc/mtk_apu_rproc.c
new file mode 100644
index 000000000000..fb416a817ef3
--- /dev/null
+++ b/drivers/remoteproc/mtk_apu_rproc.c
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 BayLibre SAS
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iommu.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/remoteproc.h>
+
+#include "remoteproc_internal.h"
+
+/* From MT8183 4.5 Vision Processor Unit (VPU).pdf datasheet */
+#define SW_RST (0x0000000C)
+#define SW_RST_OCD_HALT_ON_RST BIT(12)
+#define SW_RST_IPU_D_RST BIT(8)
+#define SW_RST_IPU_B_RST BIT(4)
+#define CORE_CTRL (0x00000110)
+#define CORE_CTRL_PDEBUG_ENABLE BIT(31)
+#define CORE_CTRL_SRAM_64K_iMEM (0x00 << 27)
+#define CORE_CTRL_SRAM_96K_iMEM (0x01 << 27)
+#define CORE_CTRL_SRAM_128K_iMEM (0x02 << 27)
+#define CORE_CTRL_SRAM_192K_iMEM (0x03 << 27)
+#define CORE_CTRL_SRAM_256K_iMEM (0x04 << 27)
+#define CORE_CTRL_PBCLK_ENABLE BIT(26)
+#define CORE_CTRL_RUN_STALL BIT(23)
+#define CORE_CTRL_STATE_VECTOR_SELECT BIT(19)
+#define CORE_CTRL_PIF_GATED BIT(17)
+#define CORE_CTRL_NMI BIT(0)
+#define CORE_XTENSA_INT (0x00000114)
+#define CORE_CTL_XTENSA_INT (0x00000118)
+#define CORE_DEFAULT0 (0x0000013C)
+#define CORE_DEFAULT0_QOS_SWAP_0 (0x00 << 28)
+#define CORE_DEFAULT0_QOS_SWAP_1 (0x01 << 28)
+#define CORE_DEFAULT0_QOS_SWAP_2 (0x02 << 28)
+#define CORE_DEFAULT0_QOS_SWAP_3 (0x03 << 28)
+#define CORE_DEFAULT0_ARUSER_USE_IOMMU (0x10 << 23)
+#define CORE_DEFAULT0_AWUSER_USE_IOMMU (0x10 << 18)
+#define CORE_DEFAULT1 (0x00000140)
+#define CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU (0x10 << 0)
+#define CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU (0x10 << 5)
+#define CORE_XTENSA_ALTRESETVEC (0x000001F8)
+
+struct mtk_vpu_rproc {
+ struct device *dev;
+ struct rproc *rproc;
+
+ void __iomem *base;
+ int irq;
+ struct clk *axi;
+ struct clk *ipu;
+ struct clk *jtag;
+};
+
+static u32 vpu_read32(struct mtk_vpu_rproc *vpu_rproc, u32 off)
+{
+ return readl(vpu_rproc->base + off);
+}
+
+static void vpu_write32(struct mtk_vpu_rproc *vpu_rproc, u32 off, u32 value)
+{
+ writel(value, vpu_rproc->base + off);
+}
+
+static int mtk_vpu_rproc_start(struct rproc *rproc)
+{
+ struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
+ u32 core_ctrl;
+
+ vpu_write32(vpu_rproc, CORE_XTENSA_ALTRESETVEC, rproc->bootaddr);
+
+ core_ctrl = vpu_read32(vpu_rproc, CORE_CTRL);
+ core_ctrl |= CORE_CTRL_PDEBUG_ENABLE | CORE_CTRL_PBCLK_ENABLE |
+ CORE_CTRL_STATE_VECTOR_SELECT | CORE_CTRL_RUN_STALL |
+ CORE_CTRL_PIF_GATED;
+ vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
+
+ vpu_write32(vpu_rproc, SW_RST, SW_RST_OCD_HALT_ON_RST |
+ SW_RST_IPU_B_RST | SW_RST_IPU_D_RST);
+ ndelay(27);
+ vpu_write32(vpu_rproc, SW_RST, 0);
+
+ core_ctrl &= ~CORE_CTRL_PIF_GATED;
+ vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
+
+ vpu_write32(vpu_rproc, CORE_DEFAULT0, CORE_DEFAULT0_AWUSER_USE_IOMMU |
+ CORE_DEFAULT0_ARUSER_USE_IOMMU |
+ CORE_DEFAULT0_QOS_SWAP_1);
+ vpu_write32(vpu_rproc, CORE_DEFAULT1,
+ CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU |
+ CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU);
+
+ core_ctrl &= ~CORE_CTRL_RUN_STALL;
+ vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
+
+ return 0;
+}
+
+static int mtk_vpu_rproc_stop(struct rproc *rproc)
+{
+ struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
+ u32 core_ctrl;
+
+ core_ctrl = vpu_read32(vpu_rproc, CORE_CTRL);
+ vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl | CORE_CTRL_RUN_STALL);
+
+ return 0;
+}
+
+static void mtk_vpu_rproc_kick(struct rproc *rproc, int vqid)
+{
+ struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
+
+ vpu_write32(vpu_rproc, CORE_CTL_XTENSA_INT, 1 << vqid);
+}
+
+static const struct rproc_ops mtk_vpu_rproc_ops = {
+ .start = mtk_vpu_rproc_start,
+ .stop = mtk_vpu_rproc_stop,
+ .kick = mtk_vpu_rproc_kick,
+};
+
+static irqreturn_t mtk_vpu_rproc_callback(int irq, void *data)
+{
+ struct rproc *rproc = (struct rproc *)data;
+ struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
+
+ vpu_write32(vpu_rproc, CORE_XTENSA_INT, 1);
+
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t handle_event(int irq, void *data)
+{
+ struct rproc *rproc = (struct rproc *)data;
+
+ rproc_vq_interrupt(rproc, 0);
+ rproc_vq_interrupt(rproc, 1);
+
+ return IRQ_HANDLED;
+}
+
+static int mtk_vpu_rproc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mtk_vpu_rproc *vpu_rproc;
+ struct rproc *rproc;
+ struct resource *res;
+ int ret;
+
+ rproc = rproc_alloc(dev, "apu", &mtk_vpu_rproc_ops, NULL,
+ sizeof(*vpu_rproc));
+ if (!rproc)
+ return -ENOMEM;
+
+ rproc->recovery_disabled = true;
+ rproc->has_iommu = false;
+
+ vpu_rproc = rproc->priv;
+ vpu_rproc->rproc = rproc;
+ vpu_rproc->dev = dev;
+
+ platform_set_drvdata(pdev, rproc);
+
+ rproc->domain = iommu_get_domain_for_dev(dev);
+ if (!rproc->domain) {
+ dev_err(dev, "Failed to get the IOMMU domain\n");
+ ret = -EINVAL;
+ goto free_rproc;
+ }
+
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ vpu_rproc->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(vpu_rproc->base)) {
+ dev_err(&pdev->dev, "Failed to map mmio\n");
+ ret = PTR_ERR(vpu_rproc->base);
+ goto free_rproc;
+ }
+
+ vpu_rproc->irq = platform_get_irq(pdev, 0);
+ if (vpu_rproc->irq < 0) {
+ ret = vpu_rproc->irq;
+ goto free_rproc;
+ }
+
+ ret = devm_request_threaded_irq(dev, vpu_rproc->irq,
+ mtk_vpu_rproc_callback, handle_event,
+ IRQF_SHARED | IRQF_ONESHOT,
+ "mtk_vpu-remoteproc", rproc);
+ if (ret) {
+ dev_err(dev, "devm_request_threaded_irq error: %d\n", ret);
+ goto free_rproc;
+ }
+
+ vpu_rproc->ipu = devm_clk_get(dev, "ipu");
+ if (IS_ERR(vpu_rproc->ipu)) {
+ dev_err(dev, "Failed to get ipu clock\n");
+ ret = PTR_ERR(vpu_rproc->ipu);
+ goto free_rproc;
+ }
+
+ ret = clk_prepare_enable(vpu_rproc->ipu);
+ if (ret) {
+ dev_err(dev, "Failed to enable ipu clock\n");
+ goto free_rproc;
+ }
+
+ vpu_rproc->axi = devm_clk_get(dev, "axi");
+ if (IS_ERR(vpu_rproc->axi)) {
+ dev_err(dev, "Failed to get axi clock\n");
+ ret = PTR_ERR(vpu_rproc->axi);
+ goto clk_disable_ipu;
+ }
+
+ ret = clk_prepare_enable(vpu_rproc->axi);
+ if (ret) {
+ dev_err(dev, "Failed to enable axi clock\n");
+ goto clk_disable_ipu;
+ }
+
+ vpu_rproc->jtag = devm_clk_get_optional(dev, "jtag");
+ if (IS_ERR(vpu_rproc->jtag)) {
+ dev_err(dev, "Failed to enable jtag clock\n");
+ ret = PTR_ERR(vpu_rproc->jtag);
+ goto clk_disable_axi;
+ }
+
+ ret = clk_prepare_enable(vpu_rproc->jtag);
+ if (ret) {
+ dev_err(dev, "Failed to enable jtag clock\n");
+ goto clk_disable_axi;
+ }
+
+ ret = of_reserved_mem_device_init(dev);
+ if (ret) {
+ dev_err(dev, "device does not have specific CMA pool\n");
+ goto clk_disable_jtag;
+ }
+
+ ret = rproc_add(rproc);
+ if (ret) {
+ dev_err(dev, "rproc_add failed: %d\n", ret);
+ goto free_mem;
+ }
+
+ return 0;
+
+free_mem:
+ of_reserved_mem_device_release(dev);
+clk_disable_jtag:
+ clk_disable_unprepare(vpu_rproc->jtag);
+clk_disable_axi:
+ clk_disable_unprepare(vpu_rproc->axi);
+clk_disable_ipu:
+ clk_disable_unprepare(vpu_rproc->ipu);
+free_rproc:
+ rproc_free(rproc);
+
+ return ret;
+}
+
+static int mtk_vpu_rproc_remove(struct platform_device *pdev)
+{
+ struct rproc *rproc = platform_get_drvdata(pdev);
+ struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
+ struct device *dev = &pdev->dev;
+
+ disable_irq(vpu_rproc->irq);
+
+ rproc_del(rproc);
+ of_reserved_mem_device_release(dev);
+ clk_disable_unprepare(vpu_rproc->jtag);
+ clk_disable_unprepare(vpu_rproc->axi);
+ clk_disable_unprepare(vpu_rproc->ipu);
+ rproc_free(rproc);
+
+ return 0;
+}
+
+static const struct of_device_id mtk_vpu_rproc_of_match[] __maybe_unused = {
+ { .compatible = "mediatek,mt8183-apu", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mtk_vpu_rproc_of_match);
+
+static struct platform_driver mtk_vpu_rproc_driver = {
+ .probe = mtk_vpu_rproc_probe,
+ .remove = mtk_vpu_rproc_remove,
+ .driver = {
+ .name = "mtk_vpu-rproc",
+ .of_match_table = of_match_ptr(mtk_vpu_rproc_of_match),
+ },
+};
+module_platform_driver(mtk_vpu_rproc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Alexandre Bailon");
+MODULE_DESCRIPTION("Mt8183 VPU Remote Processor control driver");
--
2.26.2
