On 13-07-20, 19:36, Sumit Gupta wrote:
> Add support for CPU frequency scaling on Tegra194. The frequency
> of each core can be adjusted by writing a clock divisor value to
> a MSR on the core. The range of valid divisors is queried from
> the BPMP.
>
> Signed-off-by: Mikko Perttunen <mperttu...@nvidia.com>
> Signed-off-by: Sumit Gupta <sum...@nvidia.com>
> ---
> drivers/cpufreq/Kconfig.arm | 6 +
> drivers/cpufreq/Makefile | 1 +
> drivers/cpufreq/tegra194-cpufreq.c | 397
> +++++++++++++++++++++++++++++++++++++
> 3 files changed, 404 insertions(+)
> create mode 100644 drivers/cpufreq/tegra194-cpufreq.c
>
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 15c1a12..f3d8f09 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -314,6 +314,12 @@ config ARM_TEGRA186_CPUFREQ
> help
> This adds the CPUFreq driver support for Tegra186 SOCs.
>
> +config ARM_TEGRA194_CPUFREQ
> + tristate "Tegra194 CPUFreq support"
> + depends on ARCH_TEGRA && TEGRA_BPMP
Shouldn't this depend on ARCH_TEGRA_194_SOC instead ? And I asked you
to add a default y here itself instead of patch 4/4.
> + help
> + This adds CPU frequency driver support for Tegra194 SOCs.
> +
> config ARM_TI_CPUFREQ
> bool "Texas Instruments CPUFreq support"
> depends on ARCH_OMAP2PLUS
> diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
> index f6670c4..66b5563 100644
> --- a/drivers/cpufreq/Makefile
> +++ b/drivers/cpufreq/Makefile
> @@ -83,6 +83,7 @@ obj-$(CONFIG_ARM_TANGO_CPUFREQ) +=
> tango-cpufreq.o
> obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o
> obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o
> obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += tegra186-cpufreq.o
> +obj-$(CONFIG_ARM_TEGRA194_CPUFREQ) += tegra194-cpufreq.o
> obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o
> obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o
>
> diff --git a/drivers/cpufreq/tegra194-cpufreq.c
> b/drivers/cpufreq/tegra194-cpufreq.c
> +static struct cpufreq_frequency_table *
> +init_freq_table(struct platform_device *pdev, struct tegra_bpmp *bpmp,
> + unsigned int cluster_id)
> +{
> + struct cpufreq_frequency_table *freq_table;
> + struct mrq_cpu_ndiv_limits_response resp;
> + unsigned int num_freqs, ndiv, delta_ndiv;
> + struct mrq_cpu_ndiv_limits_request req;
> + struct tegra_bpmp_message msg;
> + u16 freq_table_step_size;
> + int err, index;
> +
> + memset(&req, 0, sizeof(req));
> + req.cluster_id = cluster_id;
> +
> + memset(&msg, 0, sizeof(msg));
> + msg.mrq = MRQ_CPU_NDIV_LIMITS;
> + msg.tx.data = &req;
> + msg.tx.size = sizeof(req);
> + msg.rx.data = &resp;
> + msg.rx.size = sizeof(resp);
> +
> + err = tegra_bpmp_transfer(bpmp, &msg);
> + if (err)
> + return ERR_PTR(err);
> +
> + /*
> + * Make sure frequency table step is a multiple of mdiv to match
> + * vhint table granularity.
> + */
> + freq_table_step_size = resp.mdiv *
> + DIV_ROUND_UP(CPUFREQ_TBL_STEP_HZ, resp.ref_clk_hz);
> +
> + dev_dbg(&pdev->dev, "cluster %d: frequency table step size: %d\n",
> + cluster_id, freq_table_step_size);
> +
> + delta_ndiv = resp.ndiv_max - resp.ndiv_min;
> +
> + if (unlikely(delta_ndiv == 0))
> + num_freqs = 1;
> + else
> + /* We store both ndiv_min and ndiv_max hence the +1 */
> + num_freqs = delta_ndiv / freq_table_step_size + 1;
You need {} in the if else blocks here because of the comment here.
> +
> + num_freqs += (delta_ndiv % freq_table_step_size) ? 1 : 0;
> +
> + freq_table = devm_kcalloc(&pdev->dev, num_freqs + 1,
> + sizeof(*freq_table), GFP_KERNEL);
> + if (!freq_table)
> + return ERR_PTR(-ENOMEM);
> +
> + for (index = 0, ndiv = resp.ndiv_min;
> + ndiv < resp.ndiv_max;
> + index++, ndiv += freq_table_step_size) {
> + freq_table[index].driver_data = ndiv;
> + freq_table[index].frequency = map_ndiv_to_freq(&resp, ndiv);
> + }
> +
> + freq_table[index].driver_data = resp.ndiv_max;
> + freq_table[index++].frequency = map_ndiv_to_freq(&resp, resp.ndiv_max);
> + freq_table[index].frequency = CPUFREQ_TABLE_END;
> +
> + return freq_table;
> +}
> +
> +static int tegra194_cpufreq_probe(struct platform_device *pdev)
> +{
> + struct tegra194_cpufreq_data *data;
> + struct tegra_bpmp *bpmp;
> + int err, i;
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->num_clusters = MAX_CLUSTERS;
> + data->tables = devm_kcalloc(&pdev->dev, data->num_clusters,
> + sizeof(*data->tables), GFP_KERNEL);
> + if (!data->tables)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, data);
> +
> + bpmp = tegra_bpmp_get(&pdev->dev);
> + if (IS_ERR(bpmp))
> + return PTR_ERR(bpmp);
> +
> + read_counters_wq = alloc_workqueue("read_counters_wq", __WQ_LEGACY, 1);
> + if (!read_counters_wq) {
> + dev_err(&pdev->dev, "fail to create_workqueue\n");
> + err = -EINVAL;
> + goto put_bpmp;
> + }
> +
> + for (i = 0; i < data->num_clusters; i++) {
> + data->tables[i] = init_freq_table(pdev, bpmp, i);
> + if (IS_ERR(data->tables[i])) {
> + err = PTR_ERR(data->tables[i]);
> + goto err_free_res;
> + }
> + }
> +
> + tegra194_cpufreq_driver.driver_data = data;
> +
> + err = cpufreq_register_driver(&tegra194_cpufreq_driver);
> + if (err)
> + goto err_free_res;
> +
> + tegra_bpmp_put(bpmp);
> +
> + return err;
rather just do:
if (!err)
goto put_bpmp;
> +
> +err_free_res:
> + tegra194_cpufreq_free_resources();
> +put_bpmp:
> + tegra_bpmp_put(bpmp);
> + return err;
> +}
--
viresh
