Hi Rob,
On 7/15/20 8:19 PM, Rob Herring wrote:
On Mon, Jun 15, 2020 at 06:15:07PM +0200, Amelie Delaunay wrote:
Power operation mode may depends on hardware design, so, add the optional
property power-opmode for usb-c connector to select the power operation
mode capability.
Signed-off-by: Amelie Delaunay <amelie.delau...@st.com>
---
.../devicetree/bindings/connector/usb-connector.yaml | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml
b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 9bd52e63c935..cd7feb2d4984 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -88,6 +88,17 @@ properties:
- device
- dual
+ power-opmode:
+ description: Determines the power operation mode that the Type C connector
+ will support.
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/string
+ enum:
+ - default
Wouldn't this just be no property?
No because the aim of this optional property is to re-configure the
Type-C controller power operation mode. So, when using power-opmode =
"default", the use can re-configure it to the 'default' USB power
operation mode - 500mA for USB2 or 900mA for USB3.
+ - 1.5A
+ - 3.0A
You'll need to explain these better.
Ok I'll add a description in V2.
+ - usb_power_delivery
I would have thought 'default' would be USB-PD. Though I thought Type-C
was always USB-PD.
In fact, the DT property matches the typec_pwr_opmode enum and
typec_pwr_opmodes strings tab:
static const char * const typec_pwr_opmodes[] = {
[TYPEC_PWR_MODE_USB] = "default",
[TYPEC_PWR_MODE_1_5A] = "1.5A",
[TYPEC_PWR_MODE_3_0A] = "3.0A",
[TYPEC_PWR_MODE_PD] = "usb_power_delivery",
};
The same is done for data-role and power-role properties.
So, I would keep "default", "1.5A", "3.0A" and "usb_power_delivery", and
I'll add a description for each. Is it OK for you ?
Regards,
Amelie
+
# The following are optional properties for "usb-c-connector" with power
# delivery support.
source-pdos:
--
2.17.1
