Hi,
On 16/7/20 19:23, Guenter Roeck wrote:
> On Thu, Jul 16, 2020 at 10:09 AM Yu-Hsuan Hsu <yuhs...@chromium.org> wrote:
>>
>> It is not guaranteed that I2S RX is disabled when the kernel booting.
>> For example, if the kernel crashes while it is enabled, it will keep
>> enabled until the next time EC reboots. Reset I2S RX when probing to
>> fix this issue.
>>
>> Signed-off-by: Yu-Hsuan Hsu <yuhs...@chromium.org>
>> ---
>> drivers/platform/chrome/cros_ec_proto.c | 7 ++++++-
>> include/linux/platform_data/cros_ec_commands.h | 1 +
>> sound/soc/codecs/cros_ec_codec.c | 9 +++++++++
>> 3 files changed, 16 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/platform/chrome/cros_ec_proto.c
>> b/drivers/platform/chrome/cros_ec_proto.c
>> index 3e745e0fe092c..2c60690d7147c 100644
>> --- a/drivers/platform/chrome/cros_ec_proto.c
>> +++ b/drivers/platform/chrome/cros_ec_proto.c
>> @@ -572,7 +572,12 @@ int cros_ec_cmd_xfer_status(struct cros_ec_device
>> *ec_dev,
>> return -ENOTSUPP;
>> } else if (msg->result != EC_RES_SUCCESS) {
>> dev_dbg(ec_dev->dev, "Command result (err: %d)\n",
>> msg->result);
>> - return -EPROTO;
>> + switch (msg->result) {
>> + case EC_RES_INVALID_PARAM:
>> + return -EINVAL;
>
> As we have learned, this may impact other callers of
> cros_ec_cmd_xfer_status() which only accept -EPROTO as error return
> value. In addition to that, the code is odd:
>
> if (msg->result == EC_RES_INVALID_VERSION) {
> ...
> } else if (msg->result != EC_RES_SUCCESS) {
> switch (msg->result) {
> ....
> }
> }
>
Ack, this is odd.
> I really dislike the notion of changing error return values of
> cros_ec_cmd_xfer_status() one by one. That can only cause ongoing
> trouble with callers expecting specific error return codes (as we have
> already seen).
>
Hmm, that's a good point. Ok.
Let's apply the Guenter's patch that maps the errors *and* fix the callers of
cros_ec_cmd_xfer_status which only accept -EPROTO (there are few).
Yu-Hsuan, can you take care of this and send a patch series with all the
required patches? If not, I can work on this next week.
Thanks,
Enric
> Guenter
>
>> + default:
>> + return -EPROTO;
>> + }
>> }
>>
>> return ret;
>> diff --git a/include/linux/platform_data/cros_ec_commands.h
>> b/include/linux/platform_data/cros_ec_commands.h
>> index 69210881ebac8..11ce917ca924c 100644
>> --- a/include/linux/platform_data/cros_ec_commands.h
>> +++ b/include/linux/platform_data/cros_ec_commands.h
>> @@ -4598,6 +4598,7 @@ enum ec_codec_i2s_rx_subcmd {
>> EC_CODEC_I2S_RX_SET_SAMPLE_DEPTH = 0x2,
>> EC_CODEC_I2S_RX_SET_DAIFMT = 0x3,
>> EC_CODEC_I2S_RX_SET_BCLK = 0x4,
>> + EC_CODEC_I2S_RX_RESET = 0x5,
>> EC_CODEC_I2S_RX_SUBCMD_COUNT,
>> };
>>
>> diff --git a/sound/soc/codecs/cros_ec_codec.c
>> b/sound/soc/codecs/cros_ec_codec.c
>> index f23956cf4ed84..b5ff30b7f1aa8 100644
>> --- a/sound/soc/codecs/cros_ec_codec.c
>> +++ b/sound/soc/codecs/cros_ec_codec.c
>> @@ -1034,6 +1034,15 @@ static int cros_ec_codec_platform_probe(struct
>> platform_device *pdev)
>> }
>> priv->ec_capabilities = r.capabilities;
>>
>> + /* Reset EC codec I2S RX. */
>> + p.cmd = EC_CODEC_I2S_RX_RESET;
>> + ret = send_ec_host_command(priv->ec_device, EC_CMD_EC_CODEC_I2S_RX,
>> + (uint8_t *)&p, sizeof(p), NULL, 0);
>> + if (ret == -EINVAL)
>> + dev_info(dev, "Missing reset command. Please update your EC
>> firmware.\n");
>> + else if (ret)
>> + dev_err(dev, "failed to EC_CODEC_I2S_RESET: %d\n", ret);
>> +
>> platform_set_drvdata(pdev, priv);
>>
>> ret = devm_snd_soc_register_component(dev, &i2s_rx_component_driver,
>> --
>> 2.27.0.389.gc38d7665816-goog
>>
