[PATCH v2 1/8] spi: lantiq: fix: Rx overflow error in full duplex mode

[Dilip Kota]

In full duplex mode, rx overflow error is observed. To overcome the error,
wait until the complete data got received and proceed further.

Fixes: 17f84b793c01 ("spi: lantiq-ssc: add support for Lantiq SSC SPI 
controller")
Signed-off-by: Dilip Kota <eswara.k...@linux.intel.com>
---
 drivers/spi/spi-lantiq-ssc.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/spi/spi-lantiq-ssc.c b/drivers/spi/spi-lantiq-ssc.c
index 1fd7ee53d4510..44600fb71c484 100644
--- a/drivers/spi/spi-lantiq-ssc.c
+++ b/drivers/spi/spi-lantiq-ssc.c
@@ -184,6 +184,7 @@ struct lantiq_ssc_spi {
        unsigned int                    tx_fifo_size;
        unsigned int                    rx_fifo_size;
        unsigned int                    base_cs;
+       unsigned int                    fdx_tx_level;
 };
 
 static u32 lantiq_ssc_readl(const struct lantiq_ssc_spi *spi, u32 reg)
@@ -481,6 +482,7 @@ static void tx_fifo_write(struct lantiq_ssc_spi *spi)
        u32 data;
        unsigned int tx_free = tx_fifo_free(spi);
 
+       spi->fdx_tx_level = 0;
        while (spi->tx_todo && tx_free) {
                switch (spi->bits_per_word) {
                case 2 ... 8:
@@ -509,6 +511,7 @@ static void tx_fifo_write(struct lantiq_ssc_spi *spi)
 
                lantiq_ssc_writel(spi, data, LTQ_SPI_TB);
                tx_free--;
+               spi->fdx_tx_level++;
        }
 }
 
@@ -520,6 +523,13 @@ static void rx_fifo_read_full_duplex(struct lantiq_ssc_spi 
*spi)
        u32 data;
        unsigned int rx_fill = rx_fifo_level(spi);
 
+       /*
+        * Wait until all expected data to be shifted in.
+        * Otherwise, rx overrun may occur.
+        */
+       while (rx_fill != spi->fdx_tx_level)
+               rx_fill = rx_fifo_level(spi);
+
        while (rx_fill) {
                data = lantiq_ssc_readl(spi, LTQ_SPI_RB);
 
-- 
2.11.0