The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this.
Fixes: 33cdce6293dcc ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG" Cc: <sta...@vger.kernel.org> #3.8+ Signed-off-by: Ian Abbott <abbo...@mev.co.uk> --- .../staging/comedi/drivers/addi_apci_1032.c | 20 +++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c index 560649be9d13..e035c9f757a1 100644 --- a/drivers/staging/comedi/drivers/addi_apci_1032.c +++ b/drivers/staging/comedi/drivers/addi_apci_1032.c @@ -106,14 +106,22 @@ static int apci1032_cos_insn_config(struct comedi_device *dev, unsigned int *data) { struct apci1032_private *devpriv = dev->private; - unsigned int shift, oldmask; + unsigned int shift, oldmask, himask, lomask; switch (data[0]) { case INSN_CONFIG_DIGITAL_TRIG: if (data[1] != 0) return -EINVAL; shift = data[3]; - oldmask = (1U << shift) - 1; + if (shift < 32) { + oldmask = (1U << shift) - 1; + himask = data[4] << shift; + lomask = data[5] << shift; + } else { + oldmask = 0xffffffffu; + himask = 0; + lomask = 0; + } switch (data[2]) { case COMEDI_DIGITAL_TRIG_DISABLE: devpriv->ctrl = 0; @@ -136,8 +144,8 @@ static int apci1032_cos_insn_config(struct comedi_device *dev, devpriv->mode2 &= oldmask; } /* configure specified channels */ - devpriv->mode1 |= data[4] << shift; - devpriv->mode2 |= data[5] << shift; + devpriv->mode1 |= himask; + devpriv->mode2 |= lomask; break; case COMEDI_DIGITAL_TRIG_ENABLE_LEVELS: if (devpriv->ctrl != (APCI1032_CTRL_INT_ENA | @@ -154,8 +162,8 @@ static int apci1032_cos_insn_config(struct comedi_device *dev, devpriv->mode2 &= oldmask; } /* configure specified channels */ - devpriv->mode1 |= data[4] << shift; - devpriv->mode2 |= data[5] << shift; + devpriv->mode1 |= himask; + devpriv->mode2 |= lomask; break; default: return -EINVAL; -- 2.27.0