From: Pradeep P V K <p...@codeaurora.org>

Add the bandwidth domain supporting performance state and
the corresponding OPP tables for the sdhc device on sc7180.

Signed-off-by: Shaik Sajida Bhanu <sbh...@codeaurora.org>
---
This change is depends on the patch series
https://lkml.org/lkml/2020/6/30/1280
Also depends on documentation commit 557ed5f (Present on linux-next)
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi 
b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 68f9894..d78a066 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -684,6 +684,9 @@
                        clocks = <&gcc GCC_SDCC1_APPS_CLK>,
                                        <&gcc GCC_SDCC1_AHB_CLK>;
                        clock-names = "core", "iface";
+                       interconnects = <&aggre1_noc MASTER_EMMC &mc_virt 
SLAVE_EBI1>,
+                               <&gem_noc MASTER_APPSS_PROC &config_noc 
SLAVE_EMMC_CFG>;
+                       interconnect-names = "sdhc-ddr","cpu-sdhc";
                        power-domains = <&rpmhpd SC7180_CX>;
                        operating-points-v2 = <&sdhc1_opp_table>;
 
@@ -704,11 +707,15 @@
                                opp-100000000 {
                                        opp-hz = /bits/ 64 <100000000>;
                                        required-opps = <&rpmhpd_opp_low_svs>;
+                                       opp-peak-kBps = <100000 100000>;
+                                       opp-avg-kBps = <100000 50000>;
                                };
 
                                opp-384000000 {
                                        opp-hz = /bits/ 64 <384000000>;
                                        required-opps = <&rpmhpd_opp_svs_l1>;
+                                       opp-peak-kBps = <600000 900000>;
+                                       opp-avg-kBps = <261438 300000>;
                                };
                        };
                };
@@ -2476,6 +2483,10 @@
                        clocks = <&gcc GCC_SDCC2_APPS_CLK>,
                                        <&gcc GCC_SDCC2_AHB_CLK>;
                        clock-names = "core", "iface";
+
+                       interconnects = <&aggre1_noc MASTER_SDCC_2 &mc_virt 
SLAVE_EBI1>,
+                               <&gem_noc MASTER_APPSS_PROC &config_noc 
SLAVE_SDCC_2>;
+                       interconnect-names = "sdhc-ddr","cpu-sdhc";
                        power-domains = <&rpmhpd SC7180_CX>;
                        operating-points-v2 = <&sdhc2_opp_table>;
 
@@ -2489,11 +2500,15 @@
                                opp-100000000 {
                                        opp-hz = /bits/ 64 <100000000>;
                                        required-opps = <&rpmhpd_opp_low_svs>;
+                                       opp-peak-kBps = <160000 100000>;
+                                       opp-avg-kBps = <80000 50000>;
                                };
 
                                opp-202000000 {
                                        opp-hz = /bits/ 64 <202000000>;
                                        required-opps = <&rpmhpd_opp_svs_l1>;
+                                       opp-peak-kBps = <200000 120000>;
+                                       opp-avg-kBps = <100000 60000>;
                                };
                        };
                };
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

Reply via email to