On Wed, Jul 15, 2020 at 02:22:27PM -0700, Chris Healy wrote:
> Disable Ethernet switch reset GPIO with ZII platforms that have it
> enabled to sync up with existing ZII platforms that already have
> it disabled.
I do not follow it. The reset GPIO is part of hardware description. We
shouldn't add or remove it for sake of sync-up with other platforms.
Shawn
>
> Signed-off-by: Chris Healy <cphe...@gmail.com>
> ---
> arch/arm/boot/dts/vf610-zii-cfu1.dts | 2 --
> arch/arm/boot/dts/vf610-zii-spb4.dts | 2 --
> arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts | 2 --
> arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts | 2 --
> 4 files changed, 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts
> b/arch/arm/boot/dts/vf610-zii-cfu1.dts
> index ce1920c052fc..c2668230a4c0 100644
> --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
> +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
> @@ -170,7 +170,6 @@
> interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
>
> ports {
> #address-cells = <1>;
> @@ -354,7 +353,6 @@
> pinctrl_switch: switch-grp {
> fsl,pins = <
> VF610_PAD_PTB28__GPIO_98 0x3061
> - VF610_PAD_PTE2__GPIO_107 0x1042
> >;
> };
>
> diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts
> b/arch/arm/boot/dts/vf610-zii-spb4.dts
> index 55b4201e27f6..261317340189 100644
> --- a/arch/arm/boot/dts/vf610-zii-spb4.dts
> +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts
> @@ -127,7 +127,6 @@
> pinctrl-names = "default";
> reg = <0>;
> eeprom-length = <65536>;
> - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
> interrupt-parent = <&gpio3>;
> interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> @@ -312,7 +311,6 @@
>
> pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
> fsl,pins = <
> - VF610_PAD_PTE2__GPIO_107 0x31c2
> VF610_PAD_PTB28__GPIO_98 0x219d
> >;
> };
> diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
> b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
> index a6c22a79779e..e37b9643269b 100644
> --- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
> +++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
> @@ -113,7 +113,6 @@
> pinctrl-names = "default";
> reg = <0>;
> eeprom-length = <65536>;
> - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
> interrupt-parent = <&gpio3>;
> interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> @@ -288,7 +287,6 @@
>
> pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
> fsl,pins = <
> - VF610_PAD_PTE2__GPIO_107 0x31c2
> VF610_PAD_PTB28__GPIO_98 0x219d
> >;
> };
> diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
> b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
> index 3d05c894bdc0..b3d6d4b9fa9c 100644
> --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
> +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
> @@ -141,7 +141,6 @@
> pinctrl-names = "default";
> reg = <0>;
> eeprom-length = <65536>;
> - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
> interrupt-parent = <&gpio3>;
> interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> @@ -319,7 +318,6 @@
>
> pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
> fsl,pins = <
> - VF610_PAD_PTE2__GPIO_107 0x31c2
> VF610_PAD_PTB28__GPIO_98 0x219d
> >;
> };
> --
> 2.21.3
>
