From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 3c525b69e8c1a9a6944e976603c7a1a713e728f9 ]
During shutdown, the driver should unregister the SPI controller
and stop the hardware. Otherwise the dspi_transfer_one_message() could
wait on completion infinitely.
Additionally, calling spi_unregister_controller() first in device
shutdown reverse-matches the probe function, where SPI controller is
registered at the end.
Fixes: dc234825997e ("spi: spi-fsl-dspi: Adding shutdown hook")
Reported-by: Vladimir Oltean <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Tested-by: Vladimir Oltean <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-fsl-dspi.c | 15 +--------------
1 file changed, 1 insertion(+), 14 deletions(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index dabff9718d426..cce9e34306787 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1097,20 +1097,7 @@ static int dspi_remove(struct platform_device *pdev)
static void dspi_shutdown(struct platform_device *pdev)
{
- struct spi_controller *ctlr = platform_get_drvdata(pdev);
- struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
-
- /* Disable RX and TX */
- regmap_update_bits(dspi->regmap, SPI_MCR,
- SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF,
- SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF);
-
- /* Stop Running */
- regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_HALT, SPI_MCR_HALT);
-
- dspi_release_dma(dspi);
- clk_disable_unprepare(dspi->clk);
- spi_unregister_controller(dspi->master);
+ dspi_remove(pdev);
}
static struct platform_driver fsl_dspi_driver = {
--
2.25.1
