On Sat 18 Jul 2020 at 08:57, Christian Hewitt <christianshew...@gmail.com> 
wrote:

> Add initial support limited to HDMI i2s and SPDIF (LPCM).
>
> Signed-off-by: Christian Hewitt <christianshew...@gmail.com>
> ---
>  .../boot/dts/amlogic/meson-gxm-rbox-pro.dts   | 80 +++++++++++++++++++
>  1 file changed, 80 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts 
> b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
> index c89c9f846fb1..7b23b3da27ff 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
> @@ -14,6 +14,7 @@
>  /dts-v1/;
>  
>  #include "meson-gxm.dtsi"
> +#include <dt-bindings/sound/meson-aiu.h>
>  
>  / {
>       compatible = "kingnovel,r-box-pro", "amlogic,s912", "amlogic,meson-gxm";
> @@ -33,6 +34,13 @@
>               reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
>       };
>  
> +     spdif_dit: audio-codec-0 {
> +             #sound-dai-cells = <0>;
> +             compatible = "linux,spdif-dit";
> +             status = "okay";
> +             sound-name-prefix = "DIT";
> +     };
> +
>       leds {
>               compatible = "gpio-leds";
>  
> @@ -51,6 +59,25 @@
>               };
>       };
>  
> +     vddio_ao18: regulator-vddio_ao18 {
> +             compatible = "regulator-fixed";
> +             regulator-name = "VDDIO_AO18";
> +             regulator-min-microvolt = <1800000>;
> +             regulator-max-microvolt = <1800000>;
> +     };
> +
> +     hdmi_5v: regulator-hdmi-5v {
> +             compatible = "regulator-fixed";
> +
> +             regulator-name = "HDMI_5V";
> +             regulator-min-microvolt = <5000000>;
> +             regulator-max-microvolt = <5000000>;
> +
> +             gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
> +             enable-active-high;
> +             regulator-always-on;
> +     };

Same comment here ...

> +
>       vddio_boot: regulator-vddio-boot {
>               compatible = "regulator-fixed";
>               regulator-name = "VDDIO_BOOT";
> @@ -90,6 +117,59 @@
>               clocks = <&wifi32k>;
>               clock-names = "ext_clock";
>       };
> +
> +     sound {
> +             compatible = "amlogic,gx-sound-card";
> +             model = "GXM-RBOX-PRO";
> +             assigned-clocks = <&clkc CLKID_MPLL0>,
> +                               <&clkc CLKID_MPLL1>,
> +                               <&clkc CLKID_MPLL2>;
> +             assigned-clock-parents = <0>, <0>, <0>;
> +             assigned-clock-rates = <294912000>,
> +                                    <270950400>,
> +                                    <393216000>;
> +             status = "okay";
> +
> +             dai-link-0 {
> +                     sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
> +             };
> +
> +             dai-link-1 {
> +                     sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
> +             };
> +
> +             dai-link-2 {
> +                     sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
> +                     dai-format = "i2s";
> +                     mclk-fs = <256>;
> +
> +                     codec-0 {
> +                             sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
> +                     };
> +             };
> +
> +             dai-link-3 {
> +                     sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
> +
> +                     codec-0 {
> +                             sound-dai = <&spdif_dit>;
> +                     };
> +             };
> +
> +             dai-link-4 {
> +                     sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
> +
> +                     codec-0 {
> +                             sound-dai = <&hdmi_tx>;
> +                     };
> +             };
> +     };
> +};
> +
> +&aiu {
> +     status = "okay";
> +     pinctrl-0 = <&spdif_out_h_pins>;
> +     pinctrl-names = "default";
>  };
>  
>  &ethmac {

Reply via email to