Declare two of the I2C GPIO expanders to the EVM board init logic, and
use them. One hooks up to the LEDs using the leds-gpio driver; the other
exposes a switch to sysfs, and initializes the audio clocks.
Oh, and get rid of bogus warning about IDE conflicting with NOR unless
both are actually configured.
---
This is against the DaVinci tree, but this patch will apply to mainline.
arch/arm/mach-davinci/board-evm.c | 192 ++++++++++++++++++++++++++++++++++++++
1 files changed, 192 insertions(+)
--- a/arch/arm/mach-davinci/board-evm.c 2007-10-28 21:03:55.000000000 -0700
+++ b/arch/arm/mach-davinci/board-evm.c 2007-10-29 13:05:40.000000000 -0700
@@ -13,6 +13,10 @@
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/pcf857x.h>
+#include <linux/leds.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
@@ -21,6 +25,7 @@
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
+#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -167,6 +172,189 @@ static struct platform_device rtc_dev =
.id = -1,
};
+/*----------------------------------------------------------------------*/
+
+/*
+ * I2C GPIO expanders
+ */
+
+#define PCF_Uxx_BASE(x) ((3 + (x)) * ARCH_GPIOS_PER_CHIP)
+
+
+/* U2 -- LEDs */
+
+static struct gpio_led evm_leds[] = {
+ { .name = "DS8", .active_low = 1,
+ .default_trigger = "heartbeat", },
+ { .name = "DS7", .active_low = 1, },
+ { .name = "DS6", .active_low = 1, },
+ { .name = "DS5", .active_low = 1, },
+ { .name = "DS4", .active_low = 1, },
+ { .name = "DS3", .active_low = 1, },
+ { .name = "DS2", .active_low = 1,
+ .default_trigger = "mmc0", },
+ { .name = "DS1", .active_low = 1,
+ .default_trigger = "ide-disk", },
+};
+
+static const struct gpio_led_platform_data evm_led_data = {
+ .num_leds = ARRAY_SIZE(evm_leds),
+ .leds = evm_leds,
+};
+
+static struct platform_device *evm_led_dev;
+
+static int
+evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ struct gpio_led *leds = evm_leds;
+ int status;
+
+ while (ngpio--) {
+ leds->gpio = gpio++;
+ leds++;
+ }
+
+ /* what an extremely annoying way to be forced to handle
+ * device unregistration ...
+ */
+ evm_led_dev = platform_device_alloc("leds-gpio", 0);
+ platform_device_add_data(evm_led_dev,
+ &evm_led_data, sizeof evm_led_data);
+
+ evm_led_dev->dev.parent = &client->dev;
+ status = platform_device_add(evm_led_dev);
+ if (status < 0) {
+ platform_device_put(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return status;
+}
+
+static int
+evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ if (evm_led_dev) {
+ platform_device_unregister(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u2 = {
+ .gpio_base = PCF_Uxx_BASE(0),
+ .setup = evm_led_setup,
+ .teardown = evm_led_teardown,
+};
+
+
+/* U18 - A/V clock generator and user switch */
+
+static int sw_gpio;
+
+static ssize_t
+sw_show(struct device *d, struct device_attribute *a, char *buf)
+{
+ char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n";
+
+ strcpy(buf, s);
+ return strlen(s);
+}
+
+static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL);
+
+static int
+evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ int status;
+
+ /* export dip switch option */
+ sw_gpio = gpio + 7;
+ status = gpio_request(sw_gpio, "user_sw");
+ if (status == 0)
+ status = gpio_direction_input(sw_gpio);
+ if (status == 0)
+ status = device_create_file(&client->dev, &dev_attr_user_sw);
+ else
+ gpio_free(sw_gpio);
+ if (status != 0)
+ sw_gpio = -EINVAL;
+
+ /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */
+ gpio_request(gpio + 3, "pll_fs2");
+ gpio_direction_output(gpio + 3, 0);
+
+ gpio_request(gpio + 2, "pll_fs1");
+ gpio_direction_output(gpio + 2, 0);
+
+ gpio_request(gpio + 1, "pll_sr");
+ gpio_direction_output(gpio + 1, 0);
+
+ return 0;
+}
+
+static int
+evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ gpio_free(gpio + 1);
+ gpio_free(gpio + 2);
+ gpio_free(gpio + 3);
+
+ if (sw_gpio > 0) {
+ device_remove_file(&client->dev, &dev_attr_user_sw);
+ gpio_free(sw_gpio);
+ }
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u18 = {
+ .gpio_base = PCF_Uxx_BASE(1),
+ .n_latch = (1 << 3) | (1 << 2) | (1 << 1),
+ .setup = evm_u18_setup,
+ .teardown = evm_u18_teardown,
+};
+
+
+/* U35 - various I/O signals used to manage USB, CF, ATA, etc */
+
+#if 0
+static struct pcf857x_platform_data pcf_data_u35 = {
+ .gpio_base = PCF_Uxx_BASE(2),
+};
+#endif
+
+/*----------------------------------------------------------------------*/
+
+static struct i2c_board_info __initdata i2c_info[] = {
+ {
+ I2C_BOARD_INFO("pcf857x", 0x38),
+ .type = "pcf8574a",
+ .platform_data = &pcf_data_u2,
+ },
+ {
+ I2C_BOARD_INFO("pcf857x", 0x39),
+ .type = "pcf8574a",
+ .platform_data = &pcf_data_u18,
+ },
+#if 0
+/* don't clash with mach-davinci/i2c-client.c
+ * or drivers/i2c/chips/gpio_expander_davinci.c
+ * ... eventually both should vanish
+ */
+ {
+ I2C_BOARD_INFO("pcf857x", 0x3a),
+ .type = "pcf8574a",
+ .platform_data = &pcf_data_u35,
+ },
+#endif
+ /* ALSO:
+ * - tvl320aic33 audio codec (0x1b)
+ * - msp430 microcontroller (0x23)
+ * - 24wc256 eeprom (0x50)
+ * - tvp5146 video decoder (0x5d)
+ */
+};
+
static struct platform_device *davinci_evm_devices[] __initdata = {
&davinci_evm_flash_device,
#if defined(CONFIG_FB_DAVINCI) || defined(CONFIG_FB_DAVINCI_MODULE)
@@ -189,9 +377,13 @@ static __init void davinci_evm_init(void
davinci_psc_init();
#if defined(CONFIG_BLK_DEV_DAVINCI) || defined(CONFIG_BLK_DEV_DAVINCI_MODULE)
+#if defined(CONFIG_MTD_CFI) || defined(CONFIG_MTD_CFI_MODULE)
printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
"but share pins.\n\t Disable IDE for NOR support.\n");
#endif
+#endif
+
+ i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
platform_add_devices(davinci_evm_devices,
ARRAY_SIZE(davinci_evm_devices));
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
