RockPI 4B has AP6256 Wifi/BT, so enable them in 4B dts
instead of enable in common dtsi.

Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
Changes for v2:
- add radxa,rockpi4b

 arch/arm64/boot/dts/rockchip/Makefile         |  1 +
 .../boot/dts/rockchip/rk3399-rock-pi-4.dtsi   | 23 ----------
 .../boot/dts/rockchip/rk3399-rock-pi-4b.dts   | 42 +++++++++++++++++++
 3 files changed, 43 insertions(+), 23 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile 
b/arch/arm64/boot/dts/rockchip/Makefile
index 1250c62205a4..e7b11e8fd9b6 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi 
b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index e163f438f836..678a336010bf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -584,17 +584,6 @@ &sdio0 {
        pinctrl-names = "default";
        pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
        sd-uhs-sdr104;
-       status = "okay";
-
-       brcmf: wifi@1 {
-               compatible = "brcm,bcm4329-fmac";
-               reg = <1>;
-               interrupt-parent = <&gpio0>;
-               interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
-               interrupt-names = "host-wake";
-               pinctrl-names = "default";
-               pinctrl-0 = <&wifi_host_wake_l>;
-       };
 };
 
 &sdmmc {
@@ -663,18 +652,6 @@ u2phy1_host: host-port {
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-       status = "okay";
-
-       bluetooth {
-               compatible = "brcm,bcm43438-bt";
-               clocks = <&rk808 1>;
-               clock-names = "ext_clock";
-               device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-               host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-               shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-               pinctrl-names = "default";
-               pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
-       };
 };
 
 &uart2 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts 
b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
new file mode 100644
index 000000000000..f0055ce2fda0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <akash_gaj...@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <pragnesh_pa...@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+       model = "Radxa ROCK Pi 4B";
+       compatible = "radxa,rockpi4b", "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&sdio0 {
+       status = "okay";
+
+       brcmf: wifi@1 {
+               compatible = "brcm,bcm4329-fmac";
+               reg = <1>;
+               interrupt-parent = <&gpio0>;
+               interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+               interrupt-names = "host-wake";
+               pinctrl-names = "default";
+               pinctrl-0 = <&wifi_host_wake_l>;
+       };
+};
+
+&uart0 {
+       status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm43438-bt";
+               clocks = <&rk808 1>;
+               clock-names = "ext_clock";
+               device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+               host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+               shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+       };
+};
-- 
2.25.1

Reply via email to