From: Chris Healy <cphe...@gmail.com> Disable Ethernet switch reset GPIO with ZII platforms that have it enabled. HW switch reset results in a reset of the copper PHYs inside of the switch. We want to avoid this reset of the copper PHYs in the switch as this results in unnecessary broader network disruption on a soft reboot of the application processor.
With the HW GPIO removed, the switch driver still performs a soft reset of the switch core which has been shown to sufficiently meet our needs with other ZII platforms that do not have the HW switch reset GPIO defined. Signed-off-by: Chris Healy <cphe...@gmail.com> --- v2: - Update the description to more accurately reflect why we are making the change arch/arm/boot/dts/vf610-zii-cfu1.dts | 2 -- arch/arm/boot/dts/vf610-zii-spb4.dts | 2 -- arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts | 2 -- arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts | 2 -- 4 files changed, 8 deletions(-) diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index 64e0e9509226..50da0c94e1b7 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -172,7 +172,6 @@ switch0: switch0@0 { interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; ports { #address-cells = <1>; @@ -356,7 +355,6 @@ VF610_PAD_PTE13__GPIO_118 0x3043 pinctrl_switch: switch-grp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x3061 - VF610_PAD_PTE2__GPIO_107 0x1042 >; }; diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts index 9e5187ba3fa6..6c6ec46fd015 100644 --- a/arch/arm/boot/dts/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts @@ -129,7 +129,6 @@ switch0: switch0@0 { pinctrl-names = "default"; reg = <0>; eeprom-length = <65536>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -326,7 +325,6 @@ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 pinctrl_gpio_switch0: pinctrl-gpio-switch0 { fsl,pins = < - VF610_PAD_PTE2__GPIO_107 0x31c2 VF610_PAD_PTB28__GPIO_98 0x219d >; }; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts index 569614b08f04..73fdace4cb42 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts @@ -118,7 +118,6 @@ switch0: switch0@0 { pinctrl-names = "default"; reg = <0>; eeprom-length = <65536>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -293,7 +292,6 @@ VF610_PAD_PTB24__GPIO_94 0x219d pinctrl_gpio_switch0: pinctrl-gpio-switch0 { fsl,pins = < - VF610_PAD_PTE2__GPIO_107 0x31c2 VF610_PAD_PTB28__GPIO_98 0x219d >; }; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts index b6b0f302b7b4..fe600ab2e4bd 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -143,7 +143,6 @@ switch0: switch0@0 { pinctrl-names = "default"; reg = <0>; eeprom-length = <65536>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -333,7 +332,6 @@ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 pinctrl_gpio_switch0: pinctrl-gpio-switch0 { fsl,pins = < - VF610_PAD_PTE2__GPIO_107 0x31c2 VF610_PAD_PTB28__GPIO_98 0x219d >; }; -- 2.26.2