Hi folks, I found this call trace in /var/kern.log:
: : Oct 30 14:59:36 pluto kernel: usb 1-2: config 1 descriptor has 1 excess byte, ignoring Oct 30 14:59:36 pluto kernel: usb 1-2: configuration #1 chosen from 1 choice Oct 30 14:59:36 pluto kernel: usb 1-3: new high speed USB device using ehci_hcd and address 4 Oct 30 14:59:36 pluto kernel: usb 1-3: configuration #1 chosen from 1 choice Oct 30 14:59:36 pluto kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Oct 30 14:59:36 pluto kernel: ata3.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7 Oct 30 14:59:36 pluto kernel: ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) Oct 30 14:59:36 pluto kernel: ata3.00: configured for UDMA/100 Oct 30 14:59:36 pluto kernel: usb 1-5: new high speed USB device using ehci_hcd and address 5 Oct 30 14:59:36 pluto kernel: usb 1-5: configuration #1 chosen from 1 choice Oct 30 14:59:36 pluto kernel: usb 1-1.1: new high speed USB device using ehci_hcd and address 6 Oct 30 14:59:36 pluto kernel: usb 1-1.1: configuration #1 chosen from 1 choice Oct 30 14:59:36 pluto kernel: hub 1-1.1:1.0: USB hub found Oct 30 14:59:36 pluto kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Oct 30 14:59:36 pluto kernel: hub 1-1.1:1.0: 4 ports detected Oct 30 14:59:36 pluto kernel: sysfs: duplicate filename 'bInterfaceNumber' can not be created Oct 30 14:59:36 pluto kernel: WARNING: at fs/sysfs/dir.c:424 sysfs_add_one() Oct 30 14:59:36 pluto kernel: Oct 30 14:59:36 pluto kernel: Call Trace: Oct 30 14:59:36 pluto kernel: [<ffffffff802d250e>] sysfs_add_one+0xae/0xe0 Oct 30 14:59:36 pluto kernel: [<ffffffff802d1dff>] sysfs_add_file+0x5f/0xb0 Oct 30 14:59:36 pluto kernel: [<ffffffff802d3dfc>] sysfs_create_group+0x6c/0x120 Oct 30 14:59:36 pluto kernel: [<ffffffff880283e6>] :usbcore:usb_create_sysfs_intf_files+0x46/0x100 Oct 30 14:59:36 pluto kernel: [<ffffffff88023e76>] :usbcore:usb_set_configuration+0x336/0x5f0 Oct 30 14:59:36 pluto kernel: [<ffffffff8802cd8c>] :usbcore:generic_probe+0x7c/0xb0 Oct 30 14:59:36 pluto kernel: [<ffffffff8037875b>] driver_probe_device+0x9b/0x1c0 Oct 30 14:59:36 pluto kernel: [<ffffffff80378880>] __device_attach+0x0/0x10 Oct 30 14:59:36 pluto kernel: [<ffffffff80377828>] bus_for_each_drv+0x58/0x80 Oct 30 14:59:36 pluto kernel: [<ffffffff80378958>] device_attach+0x88/0x90 Oct 30 14:59:36 pluto kernel: [<ffffffff80377785>] bus_attach_device+0x55/0xa0 Oct 30 14:59:36 pluto kernel: [<ffffffff80376468>] device_add+0x528/0x690 Oct 30 14:59:36 pluto kernel: [<ffffffff8801e2e5>] :usbcore:usb_new_device+0x55/0xa0 Oct 30 14:59:36 pluto kernel: [<ffffffff8801f759>] :usbcore:hub_thread+0x749/0xe10 Oct 30 14:59:36 pluto kernel: [<ffffffff80229083>] set_next_entity+0x23/0x50 Oct 30 14:59:36 pluto kernel: [<ffffffff802456b0>] autoremove_wake_function+0x0/0x30 Oct 30 14:59:36 pluto kernel: [<ffffffff8801f010>] :usbcore:hub_thread+0x0/0xe10 Oct 30 14:59:36 pluto kernel: [<ffffffff8024523b>] kthread+0x4b/0x80 Oct 30 14:59:36 pluto kernel: [<ffffffff8020c538>] child_rip+0xa/0x12 Oct 30 14:59:36 pluto kernel: [<ffffffff802451f0>] kthread+0x0/0x80 Oct 30 14:59:36 pluto kernel: [<ffffffff8020c52e>] child_rip+0x0/0x12 Oct 30 14:59:36 pluto kernel: Oct 30 14:59:36 pluto kernel: ata4.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB02, max UDMA/33 Oct 30 14:59:36 pluto kernel: ata4.00: applying bridge limits Oct 30 14:59:36 pluto kernel: ata4.00: configured for UDMA/33 Oct 30 14:59:36 pluto kernel: scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 Oct 30 14:59:36 pluto kernel: usb 1-1.1.1: new high speed USB device using ehci_hcd and address 7 Oct 30 14:59:36 pluto kernel: scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183A SB02 PQ: 0 ANSI: 5 Oct 30 14:59:36 pluto kernel: ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 Oct 30 14:59:36 pluto kernel: ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 : : uname says: Linux pluto 2.6.24-rc1 #1 PREEMPT Sat Oct 27 22:56:02 CEST 2007 x86_64 GNU/Linux Is this anything to worry about? Please mail if I can help to track this down. Regards Harri - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/