On 23.07.2020 21:59, Florian Fainelli wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
>
> On 7/21/20 10:13 AM, Codrin Ciubotariu wrote:
>> The MACB embeds an MDIO bus controller. For this reason, the PHY nodes
>> were represented as sub-nodes in the MACB node. Generally, the
>> Ethernet controller is different than the MDIO controller, so the PHYs
>> are probed by a separate MDIO driver. Since adding the PHY nodes directly
>> under the ETH node became deprecated, we adjust the MACB driver to look
>> for an MDIO node and register the subnode MDIO devices.
>>
>> Signed-off-by: Codrin Ciubotariu <codrin.ciubota...@microchip.com>
>> ---
>>
>> Changes in v2:
>> - readded newline removed by mistake;
>>
>> drivers/net/ethernet/cadence/macb_main.c | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/cadence/macb_main.c
>> b/drivers/net/ethernet/cadence/macb_main.c
>> index 89fe7af5e408..b25c64b45148 100644
>> --- a/drivers/net/ethernet/cadence/macb_main.c
>> +++ b/drivers/net/ethernet/cadence/macb_main.c
>> @@ -740,10 +740,20 @@ static int macb_mii_probe(struct net_device *dev)
>> static int macb_mdiobus_register(struct macb *bp)
>> {
>> struct device_node *child, *np = bp->pdev->dev.of_node;
>> + struct device_node *mdio_node;
>> + int ret;
>>
>> if (of_phy_is_fixed_link(np))
>> return mdiobus_register(bp->mii_bus);
>
> Does not this need changing as well? Consider the use case of having
> your MACB Ethernet node have a fixed-link property to describe how it
> connects to a switch, and your MACB MDIO controller, expressed as a
> sub-node, describing the MDIO attached switch it connects to.
Just asking, does this worth having/changing it as long as there is no in
kernel board/configuration that could benefit off?
Thank you,
Claudiu Beznea
>
>>
>> + /* if an MDIO node is present, it should contain the PHY nodes */
>> + mdio_node = of_get_child_by_name(np, "mdio");
>> + if (mdio_node) {
>> + ret = of_mdiobus_register(bp->mii_bus, mdio_node);
>> + of_node_put(mdio_node);
>> + return ret;
>> + }
>> +
>> /* Only create the PHY from the device tree if at least one PHY is
>> * described. Otherwise scan the entire MDIO bus. We do this to support
>> * old device tree that did not follow the best practices and did not
>>
>
>
> --
> Florian
>
