On Fri, Jul 24, 2020 at 05:16:05PM +0800, Wei Li wrote:
> Armv8.3 extends the SPE by adding:
> - Alignment field in the Events packet, and filtering on this event
> using PMSEVFR_EL1.
> - Support for the Scalable Vector Extension (SVE).
>
> The main additions for SVE are:
> - Recording the vector length for SVE operations in the Operation Type
> packet. It is not possible to filter on vector length.
> - Incomplete predicate and empty predicate fields in the Events packet,
> and filtering on these events using PMSEVFR_EL1.
This comment description is not relevant with the changes in this
patch, so could remove them.
> Add the corresponding decode process of Events packet and Operation Type
> packet in perf tool.
This patch is to add the raw dumping for Events packet and Operation Type
packet.
> Signed-off-by: Wei Li <liwei...@huawei.com>
> ---
> .../arm-spe-decoder/arm-spe-pkt-decoder.c | 69 ++++++++++++++++++-
> 1 file changed, 67 insertions(+), 2 deletions(-)
>
> diff --git a/tools/perf/util/arm-spe-decoder/arm-spe-pkt-decoder.c
> b/tools/perf/util/arm-spe-decoder/arm-spe-pkt-decoder.c
> index b94001b756c7..10a3692839de 100644
> --- a/tools/perf/util/arm-spe-decoder/arm-spe-pkt-decoder.c
> +++ b/tools/perf/util/arm-spe-decoder/arm-spe-pkt-decoder.c
> @@ -347,6 +347,24 @@ int arm_spe_pkt_desc(const struct arm_spe_pkt *packet,
> char *buf,
> blen -= ret;
> }
> }
> + if (idx > 2) {
> + if (payload & 0x800) {
> + ret = snprintf(buf, buf_len, " ALIGNMENT");
> + buf += ret;
> + blen -= ret;
> + }
> + if (payload & 0x20000) {
> + ret = snprintf(buf, buf_len, "
> SVE-PRED-PARTIAL");
> + buf += ret;
> + blen -= ret;
> + }
> + if (payload & 0x40000) {
> + ret = snprintf(buf, buf_len, " SVE-PRED-EMPTY");
> + buf += ret;
> + blen -= ret;
> + }
> + }
> +
Correct.
> if (ret < 0)
> return ret;
> blen -= ret;
> @@ -354,8 +372,38 @@ int arm_spe_pkt_desc(const struct arm_spe_pkt *packet,
> char *buf,
> }
> case ARM_SPE_OP_TYPE:
> switch (idx) {
> - case 0: return snprintf(buf, buf_len, "%s", payload & 0x1 ?
> - "COND-SELECT" : "INSN-OTHER");
> + case 0: {
> + if (payload & 0x8) {
Some nitpicks for packet format checking ...
For SVE operation, the payload partten is: 0b0xxx1xx0.
So it's good to check the partten like:
/* SVE operation subclass is: 0b0xxx1xx0 */
if ((payload & 0x8081) == 0x80) {
....
}
If later the packet format is extended, this will not introduce any
confliction.
> + size_t blen = buf_len;
> +
> + ret = snprintf(buf, buf_len, "SVE-OTHER");
> + buf += ret;
> + blen -= ret;
> + if (payload & 0x2) {
Here should express as binary results: " FP" or " INT".
> + ret = snprintf(buf, buf_len, " FP");
> + buf += ret;
> + blen -= ret;
> + }
> + if (payload & 0x4) {
> + ret = snprintf(buf, buf_len, " PRED");
Here should express as binary results: " PRED" or " NOT-PRED".
> + buf += ret;
> + blen -= ret;
> + }
> + if (payload & 0x70) {
This is incorrect. If bits[6:4] is zero, it presents vector length is 32 bits.
> + ret = snprintf(buf, buf_len, " EVL %d",
> + 32 << ((payload & 0x70) >> 4));
> + buf += ret;
> + blen -= ret;
> + }
> + if (ret < 0)
> + return ret;
> + blen -= ret;
> + return buf_len - blen;
> + } else {
Here we can check with more accurate format as defined in ARMv8 ARM:
/* Other operation subclass is: 0b0000000x */
if ((payload & 0xfe) == 0x0) {
....
}
> + return snprintf(buf, buf_len, "%s", payload &
> 0x1 ?
> + "COND-SELECT" : "INSN-OTHER");
> + }
> + }
> case 1: {
> size_t blen = buf_len;
>
> @@ -385,6 +433,23 @@ int arm_spe_pkt_desc(const struct arm_spe_pkt *packet,
> char *buf,
> ret = snprintf(buf, buf_len, " SIMD-FP");
> buf += ret;
> blen -= ret;
> + } else if (payload & 0x8) {
> + if (payload & 0x4) {
> + ret = snprintf(buf, buf_len, " PRED");
Here should express as binary results: " PRED" or " NOT-PRED".
> + buf += ret;
> + blen -= ret;
> + }
> + if (payload & 0x70) {
This is incorrect. If bits[6:4] is zero, it presents vector length is 32 bits.
> + ret = snprintf(buf, buf_len, " EVL %d",
> + 32 << ((payload & 0x70) >> 4));
> + buf += ret;
> + blen -= ret;
> + }
> + if (payload & 0x80) {
> + ret = snprintf(buf, buf_len, " SG");
Here should express as binary results: " SG" or " NOT-SG".
Thanks,
Leo
> + buf += ret;
> + blen -= ret;
> + }
> }
> if (ret < 0)
> return ret;
> --
> 2.17.1
>
